From: Ivan Kokshaysky Date: Fri, 20 Jun 2008 23:28:54 +0000 (+0400) Subject: alpha: resurrect Cypress IDE quirk X-Git-Tag: v2.6.26-rc8~26 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a744e0160ac5804b763449aa34d3991dc21af0be;p=linux-2.6 alpha: resurrect Cypress IDE quirk Which was removed in the hope that generic legacy IDE quirk in drivers/pci/probe.c is sufficient for Cypress IDE. It isn't, as this controller has non-standard BAR layout: secondary channel registers are in the BAR0-1 of the second PCI function - not in the BAR2-3 of the same function, as the generic quirk routine assumes. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds --- diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 36ab22a7ea..5cf45fc513 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -71,6 +71,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i static void __init quirk_cypress(struct pci_dev *dev) { + /* The Notorious Cy82C693 chip. */ + + /* The generic legacy mode IDE fixup in drivers/pci/probe.c + doesn't work correctly with the Cypress IDE controller as + it has non-standard register layout. Fix that. */ + if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) { + dev->resource[2].start = dev->resource[3].start = 0; + dev->resource[2].end = dev->resource[3].end = 0; + dev->resource[2].flags = dev->resource[3].flags = 0; + if (PCI_FUNC(dev->devfn) == 2) { + dev->resource[0].start = 0x170; + dev->resource[0].end = 0x177; + dev->resource[1].start = 0x376; + dev->resource[1].end = 0x376; + } + } + /* The Cypress bridge responds on the PCI bus in the address range 0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no way to turn this off. The bridge also supports several extended