From: Glauber de Oliveira Costa <gcosta@redhat.com>
Date: Wed, 19 Mar 2008 17:25:25 +0000 (-0300)
Subject: x86: fill cpu to apicid and present map in mpparse
X-Git-Tag: v2.6.26-rc1~1154^2~372
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a6c422ccdb57924bd20ae408dba8e9db01d09677;p=linux-2.6

x86: fill cpu to apicid and present map in mpparse

This is the way x86_64 does, and complement the already
present patch that does the bios cpu to apicid mapping here

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---

diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse_32.c
index 6ea9716370..a0cec74b80 100644
--- a/arch/x86/kernel/mpparse_32.c
+++ b/arch/x86/kernel/mpparse_32.c
@@ -105,7 +105,8 @@ static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinit
 
 static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
 {
- 	int ver, apicid;
+	int ver, apicid, cpu;
+	cpumask_t tmp_map;
 	physid_mask_t phys_cpu;
  	
 	if (!(m->mpc_cpuflag & CPU_ENABLED)) {
@@ -198,6 +199,16 @@ static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
 
 	cpu_set(num_processors, cpu_possible_map);
 	num_processors++;
+	cpus_complement(tmp_map, cpu_present_map);
+	cpu = first_cpu(tmp_map);
+
+	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR)
+		/*
+		 * x86_bios_cpu_apicid is required to have processors listed
+		 * in same order as logical cpu numbers. Hence the first
+		 * entry is BSP, and so on.
+		 */
+		cpu = 0;
 
 	/*
 	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
@@ -220,12 +231,16 @@ static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
 	}
 	/* are we being called early in kernel startup? */
 	if (x86_cpu_to_apicid_early_ptr) {
+		u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
 		u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+
+		cpu_to_apicid[cpu] = m->mpc_apicid;
 		bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
 	} else {
-		int cpu = num_processors - 1;
+		per_cpu(x86_cpu_to_apicid, cpu) = m->mpc_apicid;
 		per_cpu(x86_bios_cpu_apicid, cpu) = m->mpc_apicid;
 	}
+	cpu_set(cpu, cpu_present_map);
 }
 
 static void __init MP_bus_info (struct mpc_config_bus *m)
diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot_32.c
index bf5c9e9f26..2fea910eff 100644
--- a/arch/x86/kernel/smpboot_32.c
+++ b/arch/x86/kernel/smpboot_32.c
@@ -525,16 +525,6 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 #endif	/* WAKE_SECONDARY_VIA_INIT */
 
 extern cpumask_t cpu_initialized;
-static inline int alloc_cpu_id(void)
-{
-	cpumask_t	tmp_map;
-	int cpu;
-	cpus_complement(tmp_map, cpu_present_map);
-	cpu = first_cpu(tmp_map);
-	if (cpu >= NR_CPUS)
-		return -ENODEV;
-	return cpu;
-}
 
 #ifdef CONFIG_HOTPLUG_CPU
 static struct task_struct * __cpuinitdata cpu_idle_tasks[NR_CPUS];
@@ -605,7 +595,6 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 
 	irq_ctx_init(cpu);
 
-	per_cpu(x86_cpu_to_apicid, cpu) = apicid;
 	/*
 	 * This grunge runs the startup process for
 	 * the targeted processor.
@@ -666,10 +655,8 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 		cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
 		cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
 		cpu_clear(cpu, cpu_possible_map);
+		per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID;
 		cpucount--;
-	} else {
-		per_cpu(x86_cpu_to_apicid, cpu) = apicid;
-		cpu_set(cpu, cpu_present_map);
 	}
 
 	/* mark "stuck" area as not stuck */
@@ -745,6 +732,7 @@ EXPORT_SYMBOL(xquad_portio);
 static void __init disable_smp(void)
 {
 	cpu_possible_map = cpumask_of_cpu(0);
+	cpu_present_map = cpumask_of_cpu(0);
 	smpboot_clear_io_apic_irqs();
 	phys_cpu_present_map = physid_mask_of_physid(0);
 	map_cpu_to_logical_apicid();
@@ -825,7 +813,6 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 
 	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
 	boot_cpu_logical_apicid = logical_smp_processor_id();
-	per_cpu(x86_cpu_to_apicid, 0) = boot_cpu_physical_apicid;
 
 	current_thread_info()->cpu = 0;
 
@@ -866,8 +853,11 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 			continue;
 		if (max_cpus <= cpucount+1)
 			continue;
-
-		if (((cpu = alloc_cpu_id()) <= 0) || do_boot_cpu(apicid, cpu))
+		/* Utterly temporary */
+		for (cpu = 0; cpu < NR_CPUS; cpu++)
+			if (per_cpu(x86_cpu_to_apicid, cpu) == apicid)
+				break;
+		if (do_boot_cpu(apicid, cpu))
 			printk("CPU #%d not responding - cannot use it.\n",
 								apicid);
 		else