From: Maciej W. Rozycki Date: Fri, 1 Jul 2005 16:10:40 +0000 (+0000) Subject: Use physical addresses at the interface level, letting drivers remap X-Git-Tag: v2.6.15-rc1~731^2~1^2~167 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a5fc9c0bbee8b91025993a49a9176a88380aef3c;p=linux-2.6 Use physical addresses at the interface level, letting drivers remap them as appropriate. Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c index 8f3498aa43..cc24c5ed0c 100644 --- a/arch/mips/dec/ecc-berr.c +++ b/arch/mips/dec/ecc-berr.c @@ -227,11 +227,11 @@ irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs) */ static inline void dec_kn02_be_init(void) { - volatile u32 *csr = (void *)KN02_CSR_BASE; + volatile u32 *csr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR); unsigned long flags; - kn0x_erraddr = (void *)(KN02_SLOT_BASE + KN02_ERRADDR); - kn0x_chksyn = (void *)(KN02_SLOT_BASE + KN02_CHKSYN); + kn0x_erraddr = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_ERRADDR); + kn0x_chksyn = (void *)CKSEG1ADDR(KN02_SLOT_BASE + KN02_CHKSYN); spin_lock_irqsave(&kn02_lock, flags); @@ -250,11 +250,11 @@ static inline void dec_kn02_be_init(void) static inline void dec_kn03_be_init(void) { - volatile u32 *mcr = (void *)(KN03_SLOT_BASE + IOASIC_MCR); - volatile u32 *mbcs = (void *)(KN4K_SLOT_BASE + KN4K_MB_CSR); + volatile u32 *mcr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_MCR); + volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR); - kn0x_erraddr = (void *)(KN03_SLOT_BASE + IOASIC_ERRADDR); - kn0x_chksyn = (void *)(KN03_SLOT_BASE + IOASIC_CHKSYN); + kn0x_erraddr = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_ERRADDR); + kn0x_chksyn = (void *)CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_CHKSYN); /* * Set normal ECC detection and generation, enable ECC correction. diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index c89768d5c4..41fa372007 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -2,9 +2,9 @@ * arch/mips/dec/int-handler.S * * Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen - * Copyright (C) 2000, 2001, 2002, 2003 Maciej W. Rozycki + * Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki * - * Written by Ralf Baechle and Andreas Busse, modified for DECStation + * Written by Ralf Baechle and Andreas Busse, modified for DECstation * support by Paul Antoine and Harald Koerfgen. * * completly rewritten: @@ -14,11 +14,12 @@ * by Maciej W. Rozycki. */ #include + +#include #include -#include #include +#include #include -#include #include #include @@ -28,11 +29,14 @@ #include #include +#define KN02_CSR_BASE CKSEG1ADDR(KN02_SLOT_BASE + KN02_CSR) +#define KN02XA_IOASIC_BASE CKSEG1ADDR(KN02XA_SLOT_BASE + IOASIC_IOCTL) +#define KN03_IOASIC_BASE CKSEG1ADDR(KN03_SLOT_BASE + IOASIC_IOCTL) .text .set noreorder /* - * decstation_handle_int: Interrupt handler for DECStations + * decstation_handle_int: Interrupt handler for DECstations * * We follow the model in the Indy interrupt code by David Miller, where he * says: a lot of complication here is taken away because: @@ -48,7 +52,7 @@ * 3) Linux only thinks in terms of all IRQs on or all IRQs * off, nothing in between like BSD spl() brain-damage. * - * Furthermore, the IRQs on the DECStations look basically (barring + * Furthermore, the IRQs on the DECstations look basically (barring * software IRQs which we don't use at all) like... * * DS2100/3100's, aka kn01, aka Pmax: @@ -61,7 +65,7 @@ * 3 Lance Ethernet * 4 DZ11 serial * 5 RTC - * 6 Memory Controller + * 6 Memory Controller & Video * 7 FPU * * DS5000/200, aka kn02, aka 3max: diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c index 8ec7b30a90..b9271db9bc 100644 --- a/arch/mips/dec/kn01-berr.c +++ b/arch/mips/dec/kn01-berr.c @@ -51,7 +51,7 @@ DEFINE_SPINLOCK(kn01_lock); static inline void dec_kn01_be_ack(void) { - volatile u16 *csr = (void *)(KN01_SLOT_BASE + KN01_CSR); + volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR); unsigned long flags; spin_lock_irqsave(&kn01_lock, flags); @@ -64,7 +64,8 @@ static inline void dec_kn01_be_ack(void) static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker) { - volatile u32 *kn01_erraddr = (void *)(KN01_SLOT_BASE + KN01_ERRADDR); + volatile u32 *kn01_erraddr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + + KN01_ERRADDR); static const char excstr[] = "exception"; static const char intstr[] = "interrupt"; @@ -152,7 +153,7 @@ int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup) irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - volatile u16 *csr = (void *)(KN01_SLOT_BASE + KN01_CSR); + volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR); int action; if (!(*csr & KN01_CSR_MEMERR)) @@ -178,7 +179,7 @@ irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id, void __init dec_kn01_be_init(void) { - volatile u16 *csr = (void *)(KN01_SLOT_BASE + KN01_CSR); + volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR); unsigned long flags; spin_lock_irqsave(&kn01_lock, flags); diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c index 644085e104..898bed502a 100644 --- a/arch/mips/dec/kn02-irq.c +++ b/arch/mips/dec/kn02-irq.c @@ -37,7 +37,8 @@ static int kn02_irq_base; static inline void unmask_kn02_irq(unsigned int irq) { - volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE; + volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE + + KN02_CSR); cached_kn02_csr |= (1 << (irq - kn02_irq_base + 16)); *csr = cached_kn02_csr; @@ -45,7 +46,8 @@ static inline void unmask_kn02_irq(unsigned int irq) static inline void mask_kn02_irq(unsigned int irq) { - volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE; + volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE + + KN02_CSR); cached_kn02_csr &= ~(1 << (irq - kn02_irq_base + 16)); *csr = cached_kn02_csr; @@ -105,7 +107,8 @@ static struct hw_interrupt_type kn02_irq_type = { void __init init_kn02_irqs(int base) { - volatile u32 *csr = (volatile u32 *)KN02_CSR_BASE; + volatile u32 *csr = (volatile u32 *)CKSEG1ADDR(KN02_SLOT_BASE + + KN02_CSR); unsigned long flags; int i; diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c index c299095666..6cd3f94f79 100644 --- a/arch/mips/dec/kn02xa-berr.c +++ b/arch/mips/dec/kn02xa-berr.c @@ -20,6 +20,7 @@ #include #include +#include #include #include @@ -29,8 +30,8 @@ static inline void dec_kn02xa_be_ack(void) { - volatile u32 *mer = (void *)KN02XA_MER; - volatile u32 *mem_intr = (void *)KN02XA_MEM_INTR; + volatile u32 *mer = (void *)CKSEG1ADDR(KN02XA_MER); + volatile u32 *mem_intr = (void *)CKSEG1ADDR(KN02XA_MEM_INTR); *mer = KN02CA_MER_INTR; /* Clear errors; keep the ARC IRQ. */ *mem_intr = 0; /* Any write clears the bus IRQ. */ @@ -40,8 +41,8 @@ static inline void dec_kn02xa_be_ack(void) static int dec_kn02xa_be_backend(struct pt_regs *regs, int is_fixup, int invoker) { - volatile u32 *kn02xa_mer = (void *)KN02XA_MER; - volatile u32 *kn02xa_ear = (void *)KN02XA_EAR; + volatile u32 *kn02xa_mer = (void *)CKSEG1ADDR(KN02XA_MER); + volatile u32 *kn02xa_ear = (void *)CKSEG1ADDR(KN02XA_EAR); static const char excstr[] = "exception"; static const char intstr[] = "interrupt"; @@ -126,7 +127,7 @@ irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id, void __init dec_kn02xa_be_init(void) { - volatile u32 *mbcs = (void *)(KN4K_SLOT_BASE + KN4K_MB_CSR); + volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR); /* For KN04 we need to make sure EE (?) is enabled in the MB. */ if (current_cpu_data.cputype == CPU_R4000SC) diff --git a/arch/mips/dec/prom/identify.c b/arch/mips/dec/prom/identify.c index 9380588cb1..81d5e878dd 100644 --- a/arch/mips/dec/prom/identify.c +++ b/arch/mips/dec/prom/identify.c @@ -2,7 +2,7 @@ * identify.c: machine identification code. * * Copyright (C) 1998 Harald Koerfgen and Paul M. Antoine - * Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki + * Copyright (C) 2002, 2003, 2004, 2005 Maciej W. Rozycki */ #include #include @@ -12,6 +12,7 @@ #include #include + #include #include #include @@ -21,6 +22,7 @@ #include #include #include +#include #include "dectypes.h" @@ -68,34 +70,44 @@ EXPORT_SYMBOL(dec_rtc_base); static inline void prom_init_kn01(void) { - dec_rtc_base = (void *)KN01_RTC_BASE; + dec_kn_slot_base = KN01_SLOT_BASE; dec_kn_slot_size = KN01_SLOT_SIZE; + + dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC); } static inline void prom_init_kn230(void) { - dec_rtc_base = (void *)KN01_RTC_BASE; + dec_kn_slot_base = KN01_SLOT_BASE; dec_kn_slot_size = KN01_SLOT_SIZE; + + dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN01_RTC); } static inline void prom_init_kn02(void) { - dec_rtc_base = (void *)KN02_RTC_BASE; + dec_kn_slot_base = KN02_SLOT_BASE; dec_kn_slot_size = KN02_SLOT_SIZE; + + dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN02_RTC); } static inline void prom_init_kn02xa(void) { - ioasic_base = (void *)KN02XA_IOASIC_BASE; - dec_rtc_base = (void *)KN02XA_RTC_BASE; + dec_kn_slot_base = KN02XA_SLOT_BASE; dec_kn_slot_size = IOASIC_SLOT_SIZE; + + ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL); + dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY); } static inline void prom_init_kn03(void) { - ioasic_base = (void *)KN03_IOASIC_BASE; - dec_rtc_base = (void *)KN03_RTC_BASE; + dec_kn_slot_base = KN03_SLOT_BASE; dec_kn_slot_size = IOASIC_SLOT_SIZE; + + ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL); + dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY); } diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index f63fb9cd43..8861c3b22e 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -39,6 +39,7 @@ #include #include #include +#include extern void dec_machine_restart(char *command); @@ -48,10 +49,16 @@ extern irqreturn_t dec_intr_halt(int irq, void *dev_id, struct pt_regs *regs); extern asmlinkage void decstation_handle_int(void); +unsigned long dec_kn_slot_base, dec_kn_slot_size; + +EXPORT_SYMBOL(dec_kn_slot_base); +EXPORT_SYMBOL(dec_kn_slot_size); + spinlock_t ioasic_ssr_lock; volatile u32 *ioasic_base; -unsigned long dec_kn_slot_size; + +EXPORT_SYMBOL(ioasic_base); /* * IRQ routing and priority tables. Priorites are set as follows: @@ -78,6 +85,9 @@ unsigned long dec_kn_slot_size; int dec_interrupt[DEC_NR_INTS] = { [0 ... DEC_NR_INTS - 1] = -1 }; + +EXPORT_SYMBOL(dec_interrupt); + int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2] = { { { .i = ~0 }, { .p = dec_intr_unimplemented } }, }; @@ -755,7 +765,3 @@ void __init arch_init_irq(void) if (dec_interrupt[DEC_IRQ_HALT] >= 0) setup_irq(dec_interrupt[DEC_IRQ_HALT], &haltirq); } - -EXPORT_SYMBOL(ioasic_base); -EXPORT_SYMBOL(dec_kn_slot_size); -EXPORT_SYMBOL(dec_interrupt); diff --git a/drivers/tc/tc.c b/drivers/tc/tc.c index d742c3a90b..a0e5af638e 100644 --- a/drivers/tc/tc.c +++ b/drivers/tc/tc.c @@ -10,31 +10,29 @@ * Copyright (c) Harald Koerfgen, 1998 * Copyright (c) 2001, 2003, 2005 Maciej W. Rozycki */ -#include #include -#include #include #include +#include +#include #include +#include #include +#include +#include + #include #include #include #include #include -#include -#include - -#define TC_DEBUG MODULE_LICENSE("GPL"); slot_info tc_bus[MAX_SLOT]; static int num_tcslots; static tcinfo *info; -unsigned long system_base; - /* * Interface to the world. Read comment in include/asm-mips/tc.h. */ @@ -97,13 +95,16 @@ unsigned long get_tc_speed(void) static void __init tc_probe(unsigned long startaddr, unsigned long size, int slots) { + unsigned long slotaddr; int i, slot, err; long offset; - unsigned char pattern[4]; - unsigned char *module; + u8 pattern[4]; + volatile u8 *module; for (slot = 0; slot < slots; slot++) { - module = (char *)(startaddr + slot * size); + slotaddr = startaddr + slot * size; + module = ioremap_nocache(slotaddr, size); + BUG_ON(!module); offset = OLDCARD; @@ -112,8 +113,10 @@ static void __init tc_probe(unsigned long startaddr, unsigned long size, err |= get_dbe(pattern[1], module + OLDCARD + TC_PATTERN1); err |= get_dbe(pattern[2], module + OLDCARD + TC_PATTERN2); err |= get_dbe(pattern[3], module + OLDCARD + TC_PATTERN3); - if (err) + if (err) { + iounmap(module); continue; + } if (pattern[0] != 0x55 || pattern[1] != 0x00 || pattern[2] != 0xaa || pattern[3] != 0xff) { @@ -124,16 +127,20 @@ static void __init tc_probe(unsigned long startaddr, unsigned long size, err |= get_dbe(pattern[1], module + TC_PATTERN1); err |= get_dbe(pattern[2], module + TC_PATTERN2); err |= get_dbe(pattern[3], module + TC_PATTERN3); - if (err) + if (err) { + iounmap(module); continue; + } } if (pattern[0] != 0x55 || pattern[1] != 0x00 || - pattern[2] != 0xaa || pattern[3] != 0xff) + pattern[2] != 0xaa || pattern[3] != 0xff) { + iounmap(module); continue; + } - tc_bus[slot].base_addr = (unsigned long)module; - for(i = 0; i < 8; i++) { + tc_bus[slot].base_addr = slotaddr; + for (i = 0; i < 8; i++) { tc_bus[slot].firmware[i] = module[TC_FIRM_VER + offset + 4 * i]; tc_bus[slot].vendor[i] = @@ -171,6 +178,8 @@ static void __init tc_probe(unsigned long startaddr, unsigned long size, tc_bus[slot].interrupt = -1; break; } + + iounmap(module); } } @@ -196,8 +205,8 @@ static int __init tc_init(void) tc_bus[i].flags = FREE; } - info = (tcinfo *) rex_gettcinfo(); - slot0addr = (unsigned long)CKSEG1ADDR(rex_slot_address(0)); + info = rex_gettcinfo(); + slot0addr = CPHYSADDR((long)rex_slot_address(0)); switch (mips_machtype) { case MACH_DS5000_200: @@ -216,35 +225,21 @@ static int __init tc_init(void) tc_clock = 10000 / info->clk_period; - if (TURBOCHANNEL && info->slot_size && slot0addr) { - printk("TURBOchannel rev. %1d at %2d.%1d MHz ", info->revision, - tc_clock / 10, tc_clock % 10); - printk("(with%s parity)\n", info->parity ? "" : "out"); + if (info->slot_size && slot0addr) { + pr_info("TURBOchannel rev. %d at %d.%d MHz (with%s parity)\n", + info->revision, tc_clock / 10, tc_clock % 10, + info->parity ? "" : "out"); slot_size = info->slot_size << 20; tc_probe(slot0addr, slot_size, num_tcslots); - /* - * All TURBOchannel DECstations have the onboard devices - * where the (num_tcslots + 0 or 1 on DS5k/xx) Option Module - * would be. - */ - if(mips_machtype == MACH_DS5000_XX) - i = 1; - else - i = 0; - - system_base = slot0addr + slot_size * (num_tcslots + i); - -#ifdef TC_DEBUG - for (i = 0; i < num_tcslots; i++) - if (tc_bus[i].base_addr) { - printk(" slot %d: ", i); - printk("%s %s %s\n", tc_bus[i].vendor, - tc_bus[i].name, tc_bus[i].firmware); - } -#endif + for (i = 0; i < num_tcslots; i++) { + if (!tc_bus[i].base_addr) + continue; + pr_info(" slot %d: %s %s %s\n", i, tc_bus[i].vendor, + tc_bus[i].name, tc_bus[i].firmware); + } } return 0; @@ -258,4 +253,3 @@ EXPORT_SYMBOL(release_tc_card); EXPORT_SYMBOL(get_tc_base_addr); EXPORT_SYMBOL(get_tc_irq_nr); EXPORT_SYMBOL(get_tc_speed); -EXPORT_SYMBOL(system_base); diff --git a/drivers/tc/zs.c b/drivers/tc/zs.c index 0e302ae592..c52af73a25 100644 --- a/drivers/tc/zs.c +++ b/drivers/tc/zs.c @@ -65,14 +65,14 @@ #include #include #include -#include -#ifdef CONFIG_MACH_DECSTATION #include +#include #include +#include +#include #include -#include -#endif + #ifdef CONFIG_KGDB #include #endif @@ -1616,30 +1616,22 @@ static void __init probe_sccs(void) return; } - /* - * When serial console is activated, tc_init has not been called yet - * and system_base is undefined. Unfortunately we have to hardcode - * system_base for this case :-(. HK - */ switch(mips_machtype) { #ifdef CONFIG_MACH_DECSTATION case MACH_DS5000_2X0: case MACH_DS5900: - system_base = CKSEG1ADDR(0x1f800000); n_chips = 2; zs_parms = &ds_parms; zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0]; zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1]; break; case MACH_DS5000_1XX: - system_base = CKSEG1ADDR(0x1c000000); n_chips = 2; zs_parms = &ds_parms; zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0]; zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1]; break; case MACH_DS5000_XX: - system_base = CKSEG1ADDR(0x1c000000); n_chips = 1; zs_parms = &ds_parms; zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0]; @@ -1661,10 +1653,10 @@ static void __init probe_sccs(void) * The sccs reside on the high byte of the 16 bit IOBUS */ zs_channels[n_channels].control = - (volatile unsigned char *)system_base + + (volatile void *)CKSEG1ADDR(dec_kn_slot_base + (0 == chip ? zs_parms->scc0 : zs_parms->scc1) + (0 == channel ? zs_parms->channel_a_offset : - zs_parms->channel_b_offset); + zs_parms->channel_b_offset)); zs_channels[n_channels].data = zs_channels[n_channels].control + 4; diff --git a/include/asm-mips/dec/ioasic_addrs.h b/include/asm-mips/dec/ioasic_addrs.h index 5e18a75105..4cbc1f8a11 100644 --- a/include/asm-mips/dec/ioasic_addrs.h +++ b/include/asm-mips/dec/ioasic_addrs.h @@ -45,7 +45,8 @@ /* - * Offsets for I/O ASIC registers (relative to (system_base + IOASIC_IOCTL)). + * Offsets for I/O ASIC registers + * (relative to (dec_kn_slot_base + IOASIC_IOCTL)). */ /* all systems */ #define IO_REG_SCSI_DMA_P 0x00 /* SCSI DMA Pointer */ diff --git a/include/asm-mips/dec/kn01.h b/include/asm-mips/dec/kn01.h index 607a385ffd..eb522aa1e2 100644 --- a/include/asm-mips/dec/kn01.h +++ b/include/asm-mips/dec/kn01.h @@ -13,9 +13,7 @@ #ifndef __ASM_MIPS_DEC_KN01_H #define __ASM_MIPS_DEC_KN01_H -#include - -#define KN01_SLOT_BASE CKSEG1ADDR(0x10000000) +#define KN01_SLOT_BASE 0x10000000 #define KN01_SLOT_SIZE 0x01000000 /* @@ -40,18 +38,10 @@ #define KN01_SYS_ROM (15*KN01_SLOT_SIZE) /* system board ROM */ -/* - * Some port addresses... - */ -#define KN01_LANCE_BASE (KN01_SLOT_BASE + KN01_LANCE) /* 0xB8000000 */ -#define KN01_DZ11_BASE (KN01_SLOT_BASE + KN01_DZ11) /* 0xBC000000 */ -#define KN01_RTC_BASE (KN01_SLOT_BASE + KN01_RTC) /* 0xBD000000 */ - - /* * Frame buffer memory address. */ -#define KN01_VFB_MEM CKSEG1ADDR(0x0fc00000) +#define KN01_VFB_MEM 0x0fc00000 /* * CPU interrupt bits. diff --git a/include/asm-mips/dec/kn02.h b/include/asm-mips/dec/kn02.h index 83a042e906..8319ad77b2 100644 --- a/include/asm-mips/dec/kn02.h +++ b/include/asm-mips/dec/kn02.h @@ -13,11 +13,7 @@ #ifndef __ASM_MIPS_DEC_KN02_H #define __ASM_MIPS_DEC_KN02_H -#include -#include - - -#define KN02_SLOT_BASE CKSEG1ADDR(0x1fc00000) +#define KN02_SLOT_BASE 0x1fc00000 #define KN02_SLOT_SIZE 0x00080000 /* @@ -33,14 +29,6 @@ #define KN02_SYS_ROM_7 (7*KN02_SLOT_SIZE) /* system board ROM (alias) */ -/* - * Some port addresses... - */ -#define KN02_DZ11_BASE (KN02_SLOT_BASE + KN02_DZ11) /* DZ11 */ -#define KN02_RTC_BASE (KN02_SLOT_BASE + KN02_RTC) /* RTC */ -#define KN02_CSR_BASE (KN02_SLOT_BASE + KN02_CSR) /* CSR */ - - /* * System Control & Status Register bits. */ diff --git a/include/asm-mips/dec/kn02xa.h b/include/asm-mips/dec/kn02xa.h index 3c25a3346f..a25f3d7da7 100644 --- a/include/asm-mips/dec/kn02xa.h +++ b/include/asm-mips/dec/kn02xa.h @@ -17,31 +17,23 @@ #ifndef __ASM_MIPS_DEC_KN02XA_H #define __ASM_MIPS_DEC_KN02XA_H -#include #include -#define KN02XA_SLOT_BASE CKSEG1ADDR(0x1c000000) - -/* - * Some port addresses... - */ -#define KN02XA_IOASIC_BASE (KN02XA_SLOT_BASE + IOASIC_IOCTL) /* I/O ASIC */ -#define KN02XA_RTC_BASE (KN02XA_SLOT_BASE + IOASIC_TOY) /* RTC */ - +#define KN02XA_SLOT_BASE 0x1c000000 /* * Memory control ASIC registers. */ -#define KN02XA_MER CKSEG1ADDR(0x0c400000) /* memory error register */ -#define KN02XA_MSR CKSEG1ADDR(0x0c800000) /* memory size register */ +#define KN02XA_MER 0x0c400000 /* memory error register */ +#define KN02XA_MSR 0x0c800000 /* memory size register */ /* * CPU control ASIC registers. */ -#define KN02XA_MEM_CONF CKSEG1ADDR(0x0e000000) /* write timeout config */ -#define KN02XA_EAR CKSEG1ADDR(0x0e000004) /* error address register */ -#define KN02XA_BOOT0 CKSEG1ADDR(0x0e000008) /* boot 0 register */ -#define KN02XA_MEM_INTR CKSEG1ADDR(0x0e00000c) /* write err IRQ stat & ack */ +#define KN02XA_MEM_CONF 0x0e000000 /* write timeout config */ +#define KN02XA_EAR 0x0e000004 /* error address register */ +#define KN02XA_BOOT0 0x0e000008 /* boot 0 register */ +#define KN02XA_MEM_INTR 0x0e00000c /* write err IRQ stat & ack */ /* * Memory Error Register bits, common definitions. diff --git a/include/asm-mips/dec/kn03.h b/include/asm-mips/dec/kn03.h index 9d787cc263..edede923ff 100644 --- a/include/asm-mips/dec/kn03.h +++ b/include/asm-mips/dec/kn03.h @@ -10,24 +10,15 @@ * * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions * are by courtesy of Chris Fraser. - * Copyright (C) 2000, 2002, 2003 Maciej W. Rozycki + * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki */ #ifndef __ASM_MIPS_DEC_KN03_H #define __ASM_MIPS_DEC_KN03_H -#include #include #include -#define KN03_SLOT_BASE CKSEG1ADDR(0x1f800000) - -/* - * Some port addresses... - */ -#define KN03_IOASIC_BASE (KN03_SLOT_BASE + IOASIC_IOCTL) /* I/O ASIC */ -#define KN03_RTC_BASE (KN03_SLOT_BASE + IOASIC_TOY) /* RTC */ -#define KN03_MCR_BASE (KN03_SLOT_BASE + IOASIC_MCR) /* MCR */ - +#define KN03_SLOT_BASE 0x1f800000 /* * CPU interrupt bits. diff --git a/include/asm-mips/dec/kn05.h b/include/asm-mips/dec/kn05.h index 61feac382e..15fe8f881e 100644 --- a/include/asm-mips/dec/kn05.h +++ b/include/asm-mips/dec/kn05.h @@ -21,7 +21,6 @@ #ifndef __ASM_MIPS_DEC_KN05_H #define __ASM_MIPS_DEC_KN05_H -#include #include /* @@ -30,7 +29,7 @@ * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA. * Others are handled locally. "Low" slots are always passed. */ -#define KN4K_SLOT_BASE KSEG1ADDR(0x1fc00000) +#define KN4K_SLOT_BASE 0x1fc00000 #define KN4K_MB_ROM (0*IOASIC_SLOT_SIZE) /* KN05/KN04 card ROM */ #define KN4K_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */ diff --git a/include/asm-mips/dec/system.h b/include/asm-mips/dec/system.h new file mode 100644 index 0000000000..78af51fbc7 --- /dev/null +++ b/include/asm-mips/dec/system.h @@ -0,0 +1,18 @@ +/* + * include/asm-mips/dec/system.h + * + * Generic DECstation/DECsystem bits. + * + * Copyright (C) 2005 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_DEC_SYSTEM_H +#define __ASM_DEC_SYSTEM_H + +extern unsigned long dec_kn_slot_base, dec_kn_slot_size; + +#endif /* __ASM_DEC_SYSTEM_H */ diff --git a/include/asm-mips/dec/tc.h b/include/asm-mips/dec/tc.h index d7bba43f86..9cb51f24d4 100644 --- a/include/asm-mips/dec/tc.h +++ b/include/asm-mips/dec/tc.h @@ -7,10 +7,8 @@ * * Copyright (c) 1998 Harald Koerfgen */ -#ifndef ASM_TC_H -#define ASM_TC_H - -extern unsigned long system_base; +#ifndef __ASM_DEC_TC_H +#define __ASM_DEC_TC_H /* * Search for a TURBOchannel Option Module @@ -36,8 +34,8 @@ extern unsigned long get_tc_base_addr(int); */ extern unsigned long get_tc_irq_nr(int); /* - * Return TURBOchannel clock frequency in hz + * Return TURBOchannel clock frequency in Hz */ extern unsigned long get_tc_speed(void); -#endif +#endif /* __ASM_DEC_TC_H */ diff --git a/include/asm-mips/mach-dec/mc146818rtc.h b/include/asm-mips/mach-dec/mc146818rtc.h index a326f45125..6d37a56758 100644 --- a/include/asm-mips/mach-dec/mc146818rtc.h +++ b/include/asm-mips/mach-dec/mc146818rtc.h @@ -3,7 +3,7 @@ * * Copyright (C) 1998, 2001 by Ralf Baechle * Copyright (C) 1998 by Harald Koerfgen - * Copyright (C) 2002 Maciej W. Rozycki + * Copyright (C) 2002, 2005 Maciej W. Rozycki * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -14,23 +14,18 @@ #define __ASM_MIPS_DEC_RTC_DEC_H #include - #include +#include extern volatile u8 *dec_rtc_base; -extern unsigned long dec_kn_slot_size; -#define RTC_PORT(x) CPHYSADDR(dec_rtc_base) +#define RTC_PORT(x) CPHYSADDR((long)dec_rtc_base) #define RTC_IO_EXTENT dec_kn_slot_size #define RTC_IOMAPPED 0 #undef RTC_IRQ #define RTC_DEC_YEAR 0x3f /* Where we store the real year on DECs. */ -#include -#include -#include - static inline unsigned char CMOS_READ(unsigned long addr) { return dec_rtc_base[addr * 4];