From: Frederik Kriewitz Date: Wed, 30 Jul 2008 14:53:41 +0000 (+0200) Subject: USB: ftdi_sio: add support for Luminance Stellaris Evaluation/Development Kits X-Git-Tag: v2.6.27-rc4~101^2~43 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a00c3cadc2bf50b3c925acdb3d0e5789b1650498;p=linux-2.6 USB: ftdi_sio: add support for Luminance Stellaris Evaluation/Development Kits The Patch adds support for Luminance Stellaris Evaluation/Development Kits (FTDI 2232C based). The PIDs were missing. Successfully tested with a Stellaris LM3S8962 Evaluation kit. Signed-off-by: Frederik Kriewitz Cc: stable Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 974e0eb5e7..54407351d7 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -647,6 +647,10 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, { }, /* Optional parameter entry */ diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 68927107cd..7ca2ad0157 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -816,6 +816,11 @@ #define OLIMEX_VID 0x15BA #define OLIMEX_ARM_USB_OCD_PID 0x0003 +/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ +/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ +#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 +#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 + /* www.elsterelectricity.com Elster Unicom III Optical Probe */ #define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */