From: David S. Miller Date: Fri, 2 May 2008 05:28:17 +0000 (-0700) Subject: sparc32: More memory probing consolidation. X-Git-Tag: v2.6.26-rc1~6^2~1 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=9f2b2a5f68c27c00f1e1f1922de5aa2f24505ed8;p=linux-2.6 sparc32: More memory probing consolidation. The PROM library function prom_meminit() builds a table, prom_phys_avail[], just so that probe_memory() in arch/sparc/mm/fault.c can copy it into sp_banks[]. Just have prom_meminit() fill in the sp_banks[] array directly, and remove duplicated sort() function. Signed-off-by: David S. Miller --- diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c index 3c13137685..8a55c4f0df 100644 --- a/arch/sparc/kernel/setup.c +++ b/arch/sparc/kernel/setup.c @@ -180,11 +180,9 @@ static void __init boot_flags_init(char *commands) /* This routine will in the future do all the nasty prom stuff * to probe for the mmu type and its parameters, etc. This will - * also be where SMP things happen plus the Sparc specific memory - * physical memory probe as on the alpha. + * also be where SMP things happen. */ -extern int prom_probe_memory(void); extern void sun4c_probe_vac(void); extern char cputypval; extern unsigned long start, end; @@ -268,7 +266,6 @@ void __init setup_arch(char **cmdline_p) if (ARCH_SUN4C_SUN4) sun4c_probe_vac(); load_mmu(); - (void) prom_probe_memory(); phys_base = 0xffffffffUL; highest_paddr = 0UL; diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c index f25876a56f..abd50795a7 100644 --- a/arch/sparc/mm/fault.c +++ b/arch/sparc/mm/fault.c @@ -47,64 +47,15 @@ int vac_size, vac_linesize, vac_do_hw_vac_flushes; int vac_entries_per_context, vac_entries_per_segment; int vac_entries_per_page; -/* Nice, simple, prom library does all the sweating for us. ;) */ -int prom_probe_memory (void) +/* Return how much physical memory we have. */ +unsigned long probe_memory(void) { - register struct linux_mlist_v0 *mlist; - register unsigned long bytes, base_paddr, tally; - register int i; - - i = 0; - mlist= prom_meminfo(); - bytes = tally = mlist->num_bytes; - base_paddr = (unsigned long) mlist->start_adr; - - sp_banks[0].base_addr = base_paddr; - sp_banks[0].num_bytes = bytes; - - while (mlist->theres_more != (void *) 0){ - i++; - mlist = mlist->theres_more; - bytes = mlist->num_bytes; - tally += bytes; - if (i > SPARC_PHYS_BANKS-1) { - printk ("The machine has more banks than " - "this kernel can support\n" - "Increase the SPARC_PHYS_BANKS " - "setting (currently %d)\n", - SPARC_PHYS_BANKS); - i = SPARC_PHYS_BANKS-1; - break; - } - - sp_banks[i].base_addr = (unsigned long) mlist->start_adr; - sp_banks[i].num_bytes = mlist->num_bytes; - } - - i++; - sp_banks[i].base_addr = 0xdeadbeef; - sp_banks[i].num_bytes = 0; - - /* Now mask all bank sizes on a page boundary, it is all we can - * use anyways. - */ - for(i=0; sp_banks[i].num_bytes != 0; i++) - sp_banks[i].num_bytes &= PAGE_MASK; - - return tally; -} - -/* Traverse the memory lists in the prom to see how much physical we - * have. - */ -unsigned long -probe_memory(void) -{ - int total; + unsigned long total = 0; + int i; - total = prom_probe_memory(); + for (i = 0; sp_banks[i].num_bytes; i++) + total += sp_banks[i].num_bytes; - /* Oh man, much nicer, keep the dirt in promlib. */ return total; } diff --git a/arch/sparc/prom/memory.c b/arch/sparc/prom/memory.c index 08ac1bf2e5..947f047dc9 100644 --- a/arch/sparc/prom/memory.c +++ b/arch/sparc/prom/memory.c @@ -1,120 +1,100 @@ /* memory.c: Prom routine for acquiring various bits of information * about RAM on the machine, both virtual and physical. * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net) * Copyright (C) 1997 Michael A. Griffith (grif@acm.org) */ #include +#include #include #include #include #include +#include -/* This routine, for consistency, returns the ram parameters in the - * V0 prom memory descriptor format. I choose this format because I - * think it was the easiest to work with. I feel the religious - * arguments now... ;) Also, I return the linked lists sorted to - * prevent paging_init() upset stomach as I have not yet written - * the pepto-bismol kernel module yet. - */ +static int __init prom_meminit_v0(void) +{ + struct linux_mlist_v0 *p; + int index; -struct linux_prom_registers prom_reg_memlist[64]; + index = 0; + for (p = *(romvec->pv_v0mem.v0_available); p; p = p->theres_more) { + sp_banks[index].base_addr = (unsigned long) p->start_adr; + sp_banks[index].num_bytes = p->num_bytes; + index++; + } -struct linux_mlist_v0 prom_phys_avail[64]; + return index; +} -/* Internal Prom library routine to sort a linux_mlist_v0 memory - * list. Used below in initialization. - */ -static void __init -prom_sortmemlist(struct linux_mlist_v0 *thislist) +static int __init prom_meminit_v2(void) { - int swapi = 0; - int i, mitr, tmpsize; - char *tmpaddr; - char *lowest; - - for(i=0; thislist[i].theres_more; i++) { - lowest = thislist[i].start_adr; - for(mitr = i+1; thislist[mitr-1].theres_more; mitr++) - if(thislist[mitr].start_adr < lowest) { - lowest = thislist[mitr].start_adr; - swapi = mitr; - } - if(lowest == thislist[i].start_adr) continue; - tmpaddr = thislist[swapi].start_adr; - tmpsize = thislist[swapi].num_bytes; - for(mitr = swapi; mitr > i; mitr--) { - thislist[mitr].start_adr = thislist[mitr-1].start_adr; - thislist[mitr].num_bytes = thislist[mitr-1].num_bytes; - } - thislist[i].start_adr = tmpaddr; - thislist[i].num_bytes = tmpsize; + struct linux_prom_registers reg[64]; + int node, size, num_ents, i; + + node = prom_searchsiblings(prom_getchild(prom_root_node), "memory"); + size = prom_getproperty(node, "available", (char *) reg, sizeof(reg)); + num_ents = size / sizeof(struct linux_prom_registers); + + for (i = 0; i < num_ents; i++) { + sp_banks[i].base_addr = reg[i].phys_addr; + sp_banks[i].num_bytes = reg[i].reg_size; } - return; + return num_ents; +} + +static int __init prom_meminit_sun4(void) +{ +#ifdef CONFIG_SUN4 + sp_banks[0].base_addr = 0; + sp_banks[0].num_bytes = *(sun4_romvec->memoryavail); +#endif + return 1; +} + +static int sp_banks_cmp(const void *a, const void *b) +{ + const struct sparc_phys_banks *x = a, *y = b; + + if (x->base_addr > y->base_addr) + return 1; + if (x->base_addr < y->base_addr) + return -1; + return 0; } /* Initialize the memory lists based upon the prom version. */ void __init prom_meminit(void) { - int node = 0; - unsigned int iter, num_regs; - struct linux_mlist_v0 *mptr; /* ptr for traversal */ + int i, num_ents = 0; - switch(prom_vers) { + switch (prom_vers) { case PROM_V0: - /* Nice, kind of easier to do in this case. */ - for(mptr = (*(romvec->pv_v0mem.v0_available)), iter=0; - mptr; mptr=mptr->theres_more, iter++) { - prom_phys_avail[iter].start_adr = mptr->start_adr; - prom_phys_avail[iter].num_bytes = mptr->num_bytes; - prom_phys_avail[iter].theres_more = &prom_phys_avail[iter+1]; - } - prom_phys_avail[iter-1].theres_more = NULL; - prom_sortmemlist(prom_phys_avail); + num_ents = prom_meminit_v0(); break; + case PROM_V2: case PROM_V3: - /* Grrr, have to traverse the prom device tree ;( */ - node = prom_getchild(prom_root_node); - node = prom_searchsiblings(node, "memory"); - num_regs = prom_getproperty(node, "available", - (char *) prom_reg_memlist, - sizeof(prom_reg_memlist)); - num_regs = (num_regs/sizeof(struct linux_prom_registers)); - for(iter=0; itermemoryavail); - prom_phys_avail[0].theres_more = NULL; -#endif + num_ents = prom_meminit_sun4(); break; default: break; - }; -} + } + sort(sp_banks, num_ents, sizeof(struct sparc_phys_banks), + sp_banks_cmp, NULL); -/* This returns a pointer to our libraries internal v0 format - * available memory list. - */ -struct linux_mlist_v0 * -prom_meminfo(void) -{ - return prom_phys_avail; + /* Sentinel. */ + sp_banks[num_ents].base_addr = 0xdeadbeef; + sp_banks[num_ents].num_bytes = 0; + + for (i = 0; i < num_ents; i++) + sp_banks[i].num_bytes &= PAGE_MASK; } diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h index 6ff1a3bb15..22dc39d97b 100644 --- a/include/asm-sparc/oplib.h +++ b/include/asm-sparc/oplib.h @@ -84,13 +84,6 @@ extern int prom_devclose(int device_handle); extern void prom_seek(int device_handle, unsigned int seek_hival, unsigned int seek_lowval); -/* Machine memory configuration routine. */ - -/* This function returns a V0 format available memory descriptor entry. - * This list is pre-sorted, - */ -extern struct linux_mlist_v0 *prom_meminfo(void); - /* Miscellaneous routines, don't really fit in any category per se. */ /* Reboot the machine with the command line passed. */ diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h index 39ccf2da29..1625a8c3e0 100644 --- a/include/asm-sparc/page.h +++ b/include/asm-sparc/page.h @@ -38,12 +38,11 @@ /* The following structure is used to hold the physical * memory configuration of the machine. This is filled in - * probe_memory() and is later used by mem_init() to set up - * mem_map[]. We statically allocate SPARC_PHYS_BANKS of + * prom_meminit() and is later used by mem_init() to set up + * mem_map[]. We statically allocate SPARC_PHYS_BANKS+1 of * these structs, this is arbitrary. The entry after the * last valid one has num_bytes==0. */ - struct sparc_phys_banks { unsigned long base_addr; unsigned long num_bytes;