From: Paul Mundt Date: Thu, 15 Feb 2007 09:20:52 +0000 (+0900) Subject: sh: rts7751r2d board updates. X-Git-Tag: v2.6.21-rc1~179^2 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=9c57548f17806ffd8e4dc4f7973ce78bbfbc2079;p=linux-2.6 sh: rts7751r2d board updates. This tidies up some of the rts7751r2d mess and gets it booting again. Update the defconfig, too. Signed-off-by: Masayuki Hosokawa Signed-off-by: Paul Mundt --- diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/renesas/rts7751r2d/Makefile index 833de1eac0..0d4c75a72b 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Makefile +++ b/arch/sh/boards/renesas/rts7751r2d/Makefile @@ -2,4 +2,4 @@ # Makefile for the RTS7751R2D specific parts of the kernel # -obj-y := setup.o io.o irq.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c deleted file mode 100644 index f2507a8049..0000000000 --- a/arch/sh/boards/renesas/rts7751r2d/io.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Renesas Technology sales RTS7751R2D. - * - * Initial version only to support LAN access; some - * placeholder code from io_rts7751r2d.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include -#include -#include -#include -#include -#include - -/* - * The 7751R RTS7751R2D uses the built-in PCI controller (PCIC) - * of the 7751R processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -static inline unsigned long port2adr(unsigned int port) -{ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - if (port == 0x3f6) - return (PA_AREA5_IO + 0x80c); - else - return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); - else - maybebadio((unsigned long)port); - - return port; -} - -static inline unsigned long port88796l(unsigned int port, int flag) -{ - unsigned long addr; - - if (flag) - addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1); - else - addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000; - - return addr; -} - -/* The 7751R RTS7751R2D seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - -#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) -#define CHECK_AX88796L_PORT(port) \ - ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) -#else -#define CHECK_AX88796L_PORT(port) (0) -#endif - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char rts7751r2d_inb(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - return (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - return *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned char *)pci_ioaddr(port); - else - return (*(volatile unsigned short *)port2adr(port) & 0xff); -} - -unsigned char rts7751r2d_inb_p(unsigned long port) -{ - unsigned char v; - - if (CHECK_AX88796L_PORT(port)) - v = (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - v = *(volatile unsigned char *)pci_ioaddr(port); - else - v = (*(volatile unsigned short *)port2adr(port) & 0xff); - - ctrl_delay(); - - return v; -} - -unsigned short rts7751r2d_inw(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned short *)pci_ioaddr(port); - else - maybebadio(port); - - return 0; -} - -unsigned int rts7751r2d_inl(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned long *)pci_ioaddr(port); - else - maybebadio(port); - - return 0; -} - -void rts7751r2d_outb(unsigned char value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - *((volatile unsigned short *)port88796l(port, 0)) = value; - else if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned char *)pci_ioaddr(port) = value; - else - *(volatile unsigned short *)port2adr(port) = value; -} - -void rts7751r2d_outb_p(unsigned char value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - *((volatile unsigned short *)port88796l(port, 0)) = value; - else if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned char *)pci_ioaddr(port) = value; - else - *(volatile unsigned short *)port2adr(port) = value; - - ctrl_delay(); -} - -void rts7751r2d_outw(unsigned short value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned short *)pci_ioaddr(port) = value; - else - maybebadio(port); -} - -void rts7751r2d_outl(unsigned int value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned long *)pci_ioaddr(port) = value; - else - maybebadio(port); -} - -void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u8 *bp; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) { - p = (volatile unsigned short *)port88796l(port, 0); - while (count--) - ctrl_outb(*p & 0xff, a++); - } else if (PXSEG(port)) - while (count--) - ctrl_outb(ctrl_inb(port), a++); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - bp = (__u8 *)pci_ioaddr(port); - while (count--) - ctrl_outb(*bp, a++); - } else { - p = (volatile unsigned short *)port2adr(port); - while (count--) - ctrl_outb(*p & 0xff, a++); - } -} - -void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) - p = (volatile unsigned short *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile unsigned short *)pci_ioaddr(port); - else - p = (volatile unsigned short *)port2adr(port); - while (count--) - ctrl_outw(*p, a++); -} - -void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - unsigned long a = (unsigned long)addr; - - while (count--) { - ctrl_outl(ctrl_inl(pci_ioaddr(port)), a); - a += 4; - } - } else - maybebadio(port); -} - -void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u8 *bp; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) { - p = (volatile unsigned short *)port88796l(port, 0); - while (count--) - *p = ctrl_inb(a++); - } else if (PXSEG(port)) - while (count--) - ctrl_outb(a++, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - bp = (__u8 *)pci_ioaddr(port); - while (count--) - *bp = ctrl_inb(a++); - } else { - p = (volatile unsigned short *)port2adr(port); - while (count--) - *p = ctrl_inb(a++); - } -} - -void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) - p = (volatile unsigned short *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile unsigned short *)pci_ioaddr(port); - else - p = (volatile unsigned short *)port2adr(port); - - while (count--) { - ctrl_outw(*p, a); - a += 2; - } -} - -void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - unsigned long a = (unsigned long)addr; - - while (count--) { - ctrl_outl(ctrl_inl(a), pci_ioaddr(port)); - a += 4; - } - } else - maybebadio(port); -} - -unsigned long rts7751r2d_isa_port2addr(unsigned long offset) -{ - return port2adr(offset); -} diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index cb0eb20d1b..0bae9041ac 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -9,7 +9,9 @@ * Atom Create Engineering Co., Ltd. 2002. */ #include +#include #include +#include #include #include @@ -22,79 +24,31 @@ static int mask_pos[] = {6, 11, 9, 8, 12, 10, 5, 4, 7, 14, 13, 0, 0, 0, 0}; extern int voyagergx_irq_demux(int irq); extern void setup_voyagergx_irq(void); -static void enable_rts7751r2d_irq(unsigned int irq); -static void disable_rts7751r2d_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_rts7751r2d_irq disable_rts7751r2d_irq - -static void ack_rts7751r2d_irq(unsigned int irq); -static void end_rts7751r2d_irq(unsigned int irq); - -static unsigned int startup_rts7751r2d_irq(unsigned int irq) +static void enable_rts7751r2d_irq(unsigned int irq) { - enable_rts7751r2d_irq(irq); - return 0; /* never anything pending */ + /* Set priority in IPR back to original value */ + ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1); } static void disable_rts7751r2d_irq(unsigned int irq) { - unsigned short val; - unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); - /* Set the priority in IPR to 0 */ - val = ctrl_inw(IRLCNTR1); - val &= mask; - ctrl_outw(val, IRLCNTR1); -} - -static void enable_rts7751r2d_irq(unsigned int irq) -{ - unsigned short val; - unsigned short value = (0x0001 << mask_pos[irq]); - - /* Set priority in IPR back to original value */ - val = ctrl_inw(IRLCNTR1); - val |= value; - ctrl_outw(val, IRLCNTR1); + ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])), + IRLCNTR1); } int rts7751r2d_irq_demux(int irq) { - int demux_irq; - - demux_irq = voyagergx_irq_demux(irq); - return demux_irq; -} - -static void ack_rts7751r2d_irq(unsigned int irq) -{ - disable_rts7751r2d_irq(irq); + return voyagergx_irq_demux(irq); } -static void end_rts7751r2d_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_rts7751r2d_irq(irq); -} - -static struct hw_interrupt_type rts7751r2d_irq_type = { - .typename = "RTS7751R2D IRQ", - .startup = startup_rts7751r2d_irq, - .shutdown = shutdown_rts7751r2d_irq, - .enable = enable_rts7751r2d_irq, - .disable = disable_rts7751r2d_irq, - .ack = ack_rts7751r2d_irq, - .end = end_rts7751r2d_irq, +static struct irq_chip rts7751r2d_irq_chip __read_mostly = { + .name = "rts7751r2d", + .mask = disable_rts7751r2d_irq, + .unmask = enable_rts7751r2d_irq, + .mask_ack = disable_rts7751r2d_irq, }; -static void make_rts7751r2d_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &rts7751r2d_irq_type; - disable_rts7751r2d_irq(irq); -} - /* * Initialize IRQ setting */ @@ -119,8 +73,12 @@ void __init init_rts7751r2d_IRQ(void) * IRL14=Extention #3 */ - for (i=0; i<15; i++) - make_rts7751r2d_irq(i); + for (i=0; i<15; i++) { + disable_irq_nosync(i); + set_irq_chip_and_handler_name(i, &rts7751r2d_irq_chip, + handle_level_irq, "level"); + enable_rts7751r2d_irq(i); + } setup_voyagergx_irq(); } diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index d97be12022..44b42082a0 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -1,8 +1,8 @@ /* * Renesas Technology Sales RTS7751R2D Support. * - * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2004 - 2006 Paul Mundt + * Copyright (C) 2002 - 2006 Atom Create Engineering Co., Ltd. + * Copyright (C) 2004 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -10,33 +10,13 @@ */ #include #include +#include #include #include #include -#include -#include +#include #include - -extern void heartbeat_rts7751r2d(void); -extern void init_rts7751r2d_IRQ(void); -extern int rts7751r2d_irq_demux(int irq); - -extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); -extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); - -static struct plat_serial8250_port uart_platform_data[] = { - { - .membase = (void *)VOYAGER_UART_BASE, - .mapbase = VOYAGER_UART_BASE, - .iotype = UPIO_MEM, - .irq = VOYAGER_UART0_IRQ, - .flags = UPF_BOOT_AUTOCONF, - .regshift = 2, - .uartclk = (9600 * 16), - }, { - .flags = 0, - }, -}; +#include static void __init voyagergx_serial_init(void) { @@ -45,25 +25,72 @@ static void __init voyagergx_serial_init(void) /* * GPIO Control */ - val = inl(GPIO_MUX_HIGH); + val = readl((void __iomem *)GPIO_MUX_HIGH); val |= 0x00001fe0; - outl(val, GPIO_MUX_HIGH); + writel(val, (void __iomem *)GPIO_MUX_HIGH); /* * Power Mode Gate */ - val = inl(POWER_MODE0_GATE); + val = readl((void __iomem *)POWER_MODE0_GATE); val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1); - outl(val, POWER_MODE0_GATE); + writel(val, (void __iomem *)POWER_MODE0_GATE); - val = inl(POWER_MODE1_GATE); + val = readl((void __iomem *)POWER_MODE1_GATE); val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1); - outl(val, POWER_MODE1_GATE); + writel(val, (void __iomem *)POWER_MODE1_GATE); } +static struct resource cf_ide_resources[] = { + [0] = { + .start = PA_AREA5_IO + 0x1000, + .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PA_AREA5_IO + 0x80c, + .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { +#ifdef CONFIG_RTS7751R2D_REV11 + .start = 1, +#else + .start = 2, +#endif + .flags = IORESOURCE_IRQ, + }, +}; + +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, +}; + +static struct plat_serial8250_port uart_platform_data[] = { + { + .membase = (void __iomem *)VOYAGER_UART_BASE, + .mapbase = VOYAGER_UART_BASE, + .iotype = UPIO_MEM, + .irq = VOYAGER_UART0_IRQ, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .regshift = 2, + .uartclk = (9600 * 16), + } +}; + static struct platform_device uart_device = { .name = "serial8250", - .id = -1, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = uart_platform_data, }, @@ -87,6 +114,7 @@ static struct platform_device heartbeat_device = { static struct platform_device *rts7751r2d_devices[] __initdata = { &uart_device, &heartbeat_device, + &cf_ide_device, }; static int __init rts7751r2d_devices_setup(void) @@ -94,6 +122,7 @@ static int __init rts7751r2d_devices_setup(void) return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } +__initcall(rts7751r2d_devices_setup); static void rts7751r2d_power_off(void) { @@ -105,14 +134,17 @@ static void rts7751r2d_power_off(void) */ static void __init rts7751r2d_setup(char **cmdline_p) { - device_initcall(rts7751r2d_devices_setup); + u16 ver = ctrl_inw(PA_VERREG); + + printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); + + printk(KERN_INFO "FPGA version:%d (revision:%d)\n", + (ver >> 4) & 0xf, ver & 0xf); ctrl_outw(0x0000, PA_OUTPORT); pm_power_off = rts7751r2d_power_off; voyagergx_serial_init(); - - printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); } /* @@ -123,27 +155,6 @@ struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_setup = rts7751r2d_setup, .mv_nr_irqs = 72, - .mv_inb = rts7751r2d_inb, - .mv_inw = rts7751r2d_inw, - .mv_inl = rts7751r2d_inl, - .mv_outb = rts7751r2d_outb, - .mv_outw = rts7751r2d_outw, - .mv_outl = rts7751r2d_outl, - - .mv_inb_p = rts7751r2d_inb_p, - .mv_inw_p = rts7751r2d_inw, - .mv_inl_p = rts7751r2d_inl, - .mv_outb_p = rts7751r2d_outb_p, - .mv_outw_p = rts7751r2d_outw, - .mv_outl_p = rts7751r2d_outl, - - .mv_insb = rts7751r2d_insb, - .mv_insw = rts7751r2d_insw, - .mv_insl = rts7751r2d_insl, - .mv_outsb = rts7751r2d_outsb, - .mv_outsw = rts7751r2d_outsw, - .mv_outsl = rts7751r2d_outsl, - .mv_init_irq = init_rts7751r2d_IRQ, .mv_irq_demux = rts7751r2d_irq_demux, diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c index f7ea700d05..70f1290764 100644 --- a/arch/sh/cchips/voyagergx/irq.c +++ b/arch/sh/cchips/voyagergx/irq.c @@ -28,21 +28,21 @@ static void disable_voyagergx_irq(unsigned int irq) unsigned long val; unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); - val = inl(VOYAGER_INT_MASK); - val &= ~mask; - outl(val, VOYAGER_INT_MASK); + pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + val = readl((void __iomem *)VOYAGER_INT_MASK); + val &= ~mask; + writel(val, (void __iomem *)VOYAGER_INT_MASK); } static void enable_voyagergx_irq(unsigned int irq) { - unsigned long val; - unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); + unsigned long val; + unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); - val = inl(VOYAGER_INT_MASK); - val |= mask; - outl(val, VOYAGER_INT_MASK); + pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + val = readl((void __iomem *)VOYAGER_INT_MASK); + val |= mask; + writel(val, (void __iomem *)VOYAGER_INT_MASK); } static void mask_and_ack_voyagergx(unsigned int irq) @@ -68,20 +68,20 @@ static void shutdown_voyagergx_irq(unsigned int irq) } static struct hw_interrupt_type voyagergx_irq_type = { - .typename = "VOYAGERGX-IRQ", - .startup = startup_voyagergx_irq, - .shutdown = shutdown_voyagergx_irq, - .enable = enable_voyagergx_irq, - .disable = disable_voyagergx_irq, - .ack = mask_and_ack_voyagergx, - .end = end_voyagergx_irq, + .typename = "VOYAGERGX-IRQ", + .startup = startup_voyagergx_irq, + .shutdown = shutdown_voyagergx_irq, + .enable = enable_voyagergx_irq, + .disable = disable_voyagergx_irq, + .ack = mask_and_ack_voyagergx, + .end = end_voyagergx_irq, }; static irqreturn_t voyagergx_interrupt(int irq, void *dev_id) { printk(KERN_INFO "VoyagerGX: spurious interrupt, status: 0x%x\n", - inl(INT_STATUS)); + (unsigned int)readl((void __iomem *)INT_STATUS)); return IRQ_HANDLED; } @@ -93,13 +93,13 @@ static struct { void voyagergx_register_irq_demux(int irq, int (*demux)(int irq, void *dev), void *dev) { - voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux; - voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev; + voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux; + voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev; } void voyagergx_unregister_irq_demux(int irq) { - voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0; + voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0; } int voyagergx_irq_demux(int irq) @@ -107,31 +107,25 @@ int voyagergx_irq_demux(int irq) if (irq == IRQ_VOYAGER ) { unsigned long i = 0, bit __attribute__ ((unused)); - unsigned long val = inl(INT_STATUS); -#if 1 - if ( val & ( 1 << 1 )){ + unsigned long val = readl((void __iomem *)INT_STATUS); + + if (val & (1 << 1)) i = 1; - } else if ( val & ( 1 << 2 )){ + else if (val & (1 << 2)) i = 2; - } else if ( val & ( 1 << 6 )){ + else if (val & (1 << 6)) i = 6; - } else if( val & ( 1 << 10 )){ + else if (val & (1 << 10)) i = 10; - } else if( val & ( 1 << 11 )){ + else if (val & (1 << 11)) i = 11; - } else if( val & ( 1 << 12 )){ + else if (val & (1 << 12)) i = 12; - } else if( val & ( 1 << 17 )){ + else if (val & (1 << 17)) i = 17; - } else { + else printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val); - } - pr_debug("voyagergx_irq_demux %ld\n", i); -#else - for (bit = 1, i = 0 ; i < VOYAGER_IRQ_NUM ; bit <<= 1, i++) - if (val & bit) - break; -#endif + pr_debug("voyagergx_irq_demux %d \n", i); if (i < VOYAGER_IRQ_NUM) { irq = VOYAGER_IRQ_BASE + i; if (voyagergx_demux[i].func != 0) diff --git a/arch/sh/cchips/voyagergx/setup.c b/arch/sh/cchips/voyagergx/setup.c index 66b2fedd7a..33f03027c1 100644 --- a/arch/sh/cchips/voyagergx/setup.c +++ b/arch/sh/cchips/voyagergx/setup.c @@ -19,7 +19,7 @@ static int __init setup_voyagergx(void) { unsigned long val; - val = inl(DRAM_CTRL); + val = readl((void __iomem *)DRAM_CTRL); val |= (DRAM_CTRL_CPU_COLUMN_SIZE_256 | DRAM_CTRL_CPU_ACTIVE_PRECHARGE | DRAM_CTRL_CPU_RESET | @@ -29,7 +29,7 @@ static int __init setup_voyagergx(void) DRAM_CTRL_ACTIVE_PRECHARGE | DRAM_CTRL_RESET | DRAM_CTRL_REMAIN_ACTIVE); - outl(val, DRAM_CTRL); + writel(val, (void __iomem *)DRAM_CTRL); return 0; } diff --git a/arch/sh/configs/rts7751r2d_defconfig b/arch/sh/configs/rts7751r2d_defconfig index 099e98f147..db6a02df5a 100644 --- a/arch/sh/configs/rts7751r2d_defconfig +++ b/arch/sh/configs/rts7751r2d_defconfig @@ -1,15 +1,21 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:38:36 2006 +# Linux kernel version: 2.6.20 +# Thu Feb 15 17:17:29 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,8 +39,8 @@ CONFIG_SYSVIPC=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -97,10 +103,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_SH_73180_SOLUTION_ENGINE is not set # CONFIG_SH_7751_SYSTEMH is not set # CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set # CONFIG_SH_SATURN is not set # CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set # CONFIG_SH_MPC1211 is not set # CONFIG_SH_SH03 is not set # CONFIG_SH_SECUREEDGE5410 is not set @@ -113,6 +117,9 @@ CONFIG_SH_RTS7751R2D=y # CONFIG_SH_LANDISK is not set # CONFIG_SH_TITAN is not set # CONFIG_SH_SHMIN is not set +# CONFIG_SH_7206_SOLUTION_ENGINE is not set +# CONFIG_SH_7619_SOLUTION_ENGINE is not set +# CONFIG_SH_ASDAP310 is not set # CONFIG_SH_UNKNOWN is not set # @@ -124,6 +131,12 @@ CONFIG_CPU_SH4=y # SH-2 Processor Support # # CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set + +# +# SH-2A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7206 is not set # # SH-3 Processor Support @@ -159,12 +172,14 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set # # SH4AL-DSP Processor Support # # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options @@ -174,6 +189,9 @@ CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_VSYSCALL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -183,6 +201,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 # # Cache configuration @@ -195,11 +214,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y # CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y # # Timer support @@ -210,6 +232,8 @@ CONFIG_SH_TMU=y # RTS7751R2D options # CONFIG_RTS7751R2D_REV11=y +CONFIG_SH_TIMER_IRQ=16 +# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=60000000 # @@ -231,11 +255,17 @@ CONFIG_VOYAGERGX=y # CONFIG_HD6446X_SERIES is not set CONFIG_HEARTBEAT=y +# +# Additional SuperH Device Drivers +# +# CONFIG_PUSH_SWITCH is not set + # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set @@ -251,7 +281,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00010000 CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="mem=64M console=ttySC0,115200 root=/dev/hda1" +CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # # Bus options @@ -260,7 +290,6 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # # PCCARD (PCMCIA/CardBus) support @@ -302,6 +331,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -319,11 +349,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -380,7 +412,7 @@ CONFIG_WIRELESS_EXT=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # @@ -422,44 +454,145 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_ATA_OVER_ETH is not set # -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives +# Misc devices # -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # -# IDE chipset support/bugfixes +# ATA/ATAPI/MFM/RLL support # -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers # -# CONFIG_ATA is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_PLATFORM=y # # Multi-device support (RAID and LVM) @@ -470,6 +603,9 @@ CONFIG_IDE_GENERIC=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -540,6 +676,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -559,14 +696,17 @@ CONFIG_8139TOO=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -611,6 +751,7 @@ CONFIG_NET_WIRELESS=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -646,14 +787,23 @@ CONFIG_NET_WIRELESS=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # -# CONFIG_SERIAL_SH_SCI is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=1 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_UNIX98_PTYS is not set +CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -671,10 +821,6 @@ CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -682,7 +828,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -698,6 +843,7 @@ CONFIG_HW_RANDOM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -706,18 +852,14 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -759,7 +901,6 @@ CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set @@ -782,6 +923,18 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -801,6 +954,7 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set @@ -812,18 +966,23 @@ CONFIG_SND_AC97_BUS=m CONFIG_SND_YMFPCI=m # CONFIG_SND_AC97_POWER_SAVE is not set +# +# SoC audio support +# +# CONFIG_SND_SOC is not set + # # Open Sound System # CONFIG_SOUND_PRIME=m -# CONFIG_OSS_OBSOLETE_DRIVER is not set +# CONFIG_OBSOLETE_OSS is not set # CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set +CONFIG_AC97_BUS=m # # USB support @@ -872,7 +1031,29 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # Real Time Clock # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set # # DMA Engine support @@ -887,6 +1068,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -894,10 +1083,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set @@ -932,7 +1123,8 @@ CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -1017,6 +1209,11 @@ CONFIG_NLS_CODEPAGE_932=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + # # Profiling support # @@ -1026,16 +1223,20 @@ CONFIG_OPROFILE=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 +CONFIG_EARLY_PRINTK=y # CONFIG_KGDB is not set # @@ -1052,8 +1253,11 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index aa26245f03..6f8f458912 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -46,11 +46,13 @@ static struct platform_device rtc_device = { static struct plat_sci_port sci_platform_data[] = { { +#ifndef CONFIG_SH_RTS7751R2D .mapbase = 0xffe00000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCI, .irqs = { 23, 24, 25, 0 }, }, { +#endif .mapbase = 0xffe80000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c index 28ec7487de..66626c03e1 100644 --- a/arch/sh/kernel/io_generic.c +++ b/arch/sh/kernel/io_generic.c @@ -1,9 +1,8 @@ -/* $Id: io_generic.c,v 1.2 2003/05/04 19:29:53 lethal Exp $ - * - * linux/arch/sh/kernel/io_generic.c +/* + * arch/sh/kernel/io_generic.c * * Copyright (C) 2000 Niibe Yutaka - * Copyright (C) 2005 Paul Mundt + * Copyright (C) 2005 - 2007 Paul Mundt * * Generic I/O routine. These can be used where a machine specific version * is not required. @@ -13,8 +12,9 @@ * for more details. */ #include -#include +#include #include +#include #ifdef CONFIG_CPU_SH3 /* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a @@ -96,6 +96,7 @@ void generic_insw(unsigned long port, void *dst, unsigned long count) while (count--) *buf++ = *port_addr; + flush_dcache_all(); dummy_read(); } @@ -170,6 +171,7 @@ void generic_outsw(unsigned long port, const void *src, unsigned long count) while (count--) *port_addr = *buf++; + flush_dcache_all(); dummy_read(); } diff --git a/include/asm-sh/rts7751r2d.h b/include/asm-sh/rts7751r2d.h index 796b8fcb81..10565ac796 100644 --- a/include/asm-sh/rts7751r2d.h +++ b/include/asm-sh/rts7751r2d.h @@ -68,6 +68,10 @@ #define IRQ_PCISLOT2 10 /* PCI Slot #2 IRQ */ #define IRQ_EXTENTION 11 /* EXTn IRQ */ +/* arch/sh/boards/renesas/rts7751r2d/irq.c */ +void init_rts7751r2d_IRQ(void); +int rts7751r2d_irq_demux(int); + #define __IO_PREFIX rts7751r2d #include diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h index 4ac0e78108..21f6d330f1 100644 --- a/include/asm-sh/serial.h +++ b/include/asm-sh/serial.h @@ -29,10 +29,7 @@ #else -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS } /* ttyS1 */ +#define SERIAL_PORT_DFNS #endif diff --git a/include/asm-sh/voyagergx.h b/include/asm-sh/voyagergx.h index 99b0807d1c..64c936b227 100644 --- a/include/asm-sh/voyagergx.h +++ b/include/asm-sh/voyagergx.h @@ -308,6 +308,9 @@ #define AC97C_READ (1 << 19) #define AC97C_WD_BIT (1 << 2) #define AC97C_INDEX_MASK 0x7f -/* -------------------------------------------------------------------- */ + +/* arch/sh/cchips/voyagergx/consistent.c */ +void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); +int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); #endif /* _VOYAGER_GX_REG_H */