From: Luotao Fu Date: Mon, 28 Jul 2008 22:46:32 +0000 (-0700) Subject: mpc52xx_psc_spi: fix block transfer X-Git-Tag: v2.6.27-rc1~14 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=9a7867e1b34c3575e7e76a05c0c54c6edbdae2a4;p=linux-2.6 mpc52xx_psc_spi: fix block transfer The block transfer routine in the mpc52xx psc spi driver misinterpret the datasheet. According to the processor datasheet the chipselect is held as long as the EOF is not written. Theoretically blocks of any sizes can be transferred in this way. The old routine however writes an EOF after every word, which has the size of size_of_word. This makes the transfer slow. Also fixed some duplicate code. Signed-off-by: Luotao Fu Signed-off-by: David Brownell Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index 604e5f0a2d..25eda71f4b 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -148,7 +148,6 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, unsigned rfalarm; unsigned send_at_once = MPC52xx_PSC_BUFSIZE; unsigned recv_at_once; - unsigned bpw = mps->bits_per_word / 8; if (!t->tx_buf && !t->rx_buf && t->len) return -EINVAL; @@ -164,22 +163,15 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, } dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once); - if (tx_buf) { - for (; send_at_once; sb++, send_at_once--) { - /* set EOF flag */ - if (mps->bits_per_word - && (sb + 1) % bpw == 0) - out_8(&psc->ircr2, 0x01); + for (; send_at_once; sb++, send_at_once--) { + /* set EOF flag before the last word is sent */ + if (send_at_once == 1) + out_8(&psc->ircr2, 0x01); + + if (tx_buf) out_8(&psc->mpc52xx_psc_buffer_8, tx_buf[sb]); - } - } else { - for (; send_at_once; sb++, send_at_once--) { - /* set EOF flag */ - if (mps->bits_per_word - && ((sb + 1) % bpw) == 0) - out_8(&psc->ircr2, 0x01); + else out_8(&psc->mpc52xx_psc_buffer_8, 0); - } }