From: Vitaly Bordug Date: Tue, 17 Jul 2007 11:03:37 +0000 (-0700) Subject: powerpc: 8xx: fix whitespace and indentation X-Git-Tag: v2.6.23-rc1~726 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=99121c0da3586f46a0397d9b0b4551a6286d003d;p=linux-2.6 powerpc: 8xx: fix whitespace and indentation Rolling forward PCMCIA driver, it was discovered that the indentation in existing one, as well as in BSP side are very odd. This patch is just result of Lindent run ontop of culprit files. Signed-off-by: Vitaly Bordug Cc: Arnd Bergmann Cc: Olof Johansson Cc: Dominik Brodowski Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c index dc27dab48d..5a808d611a 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -40,7 +40,7 @@ #include extern void cpm_reset(void); -extern void mpc8xx_show_cpuinfo(struct seq_file*); +extern void mpc8xx_show_cpuinfo(struct seq_file *); extern void mpc8xx_restart(char *cmd); extern void mpc8xx_calibrate_decr(void); extern int mpc8xx_set_rtc_time(struct rtc_time *tm); @@ -48,9 +48,9 @@ extern void mpc8xx_get_rtc_time(struct rtc_time *tm); extern void m8xx_pic_init(void); extern unsigned int mpc8xx_get_irq(void); -static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi); -static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi); -static void init_scc3_ioports(struct fs_platform_info* ptr); +static void init_smc1_uart_ioports(struct fs_uart_platform_info *fpi); +static void init_smc2_uart_ioports(struct fs_uart_platform_info *fpi); +static void init_scc3_ioports(struct fs_platform_info *ptr); #ifdef CONFIG_PCMCIA_M8XX static void pcmcia_hw_setup(int slot, int enable) @@ -73,7 +73,7 @@ static int pcmcia_set_voltage(int slot, int vcc, int vpp) bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - switch(vcc) { + switch (vcc) { case 0: break; case 33: @@ -86,12 +86,12 @@ static int pcmcia_set_voltage(int slot, int vcc, int vpp) return 1; } - switch(vpp) { + switch (vpp) { case 0: break; case 33: case 50: - if(vcc == vpp) + if (vcc == vpp) reg |= BCSR1_PCCVPP1; else return 1; @@ -127,7 +127,7 @@ void __init mpc885ads_board_setup(void) #endif bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - cp = (cpm8xx_t *)immr_map(im_cpm); + cp = (cpm8xx_t *) immr_map(im_cpm); if (bcsr_io == NULL) { printk(KERN_CRIT "Could not remap BCSR\n"); @@ -140,13 +140,13 @@ void __init mpc885ads_board_setup(void) out_8(&(cp->cp_smc[0].smc_smcm), tmpval8); clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN); /* brg1 */ #else - setbits32(bcsr_io,BCSR1_RS232EN_1); + setbits32(bcsr_io, BCSR1_RS232EN_1); out_be16(&cp->cp_smc[0].smc_smcmr, 0); out_8(&cp->cp_smc[0].smc_smce, 0); #endif #ifdef CONFIG_SERIAL_CPM_SMC2 - clrbits32(bcsr_io,BCSR1_RS232EN_2); + clrbits32(bcsr_io, BCSR1_RS232EN_2); clrbits32(&cp->cp_simode, 0xe0000000 >> 1); setbits32(&cp->cp_simode, 0x20000000 >> 1); /* brg2 */ tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX); @@ -155,7 +155,7 @@ void __init mpc885ads_board_setup(void) init_smc2_uart_ioports(0); #else - setbits32(bcsr_io,BCSR1_RS232EN_2); + setbits32(bcsr_io, BCSR1_RS232EN_2); out_be16(&cp->cp_smc[1].smc_smcmr, 0); out_8(&cp->cp_smc[1].smc_smce, 0); #endif @@ -164,16 +164,16 @@ void __init mpc885ads_board_setup(void) #ifdef CONFIG_FS_ENET /* use MDC for MII (common) */ - io_port = (iop8xx_t*)immr_map(im_ioport); + io_port = (iop8xx_t *) immr_map(im_ioport); setbits16(&io_port->iop_pdpar, 0x0080); clrbits16(&io_port->iop_pddir, 0x0080); bcsr_io = ioremap(BCSR5, sizeof(unsigned long)); - clrbits32(bcsr_io,BCSR5_MII1_EN); - clrbits32(bcsr_io,BCSR5_MII1_RST); + clrbits32(bcsr_io, BCSR5_MII1_EN); + clrbits32(bcsr_io, BCSR5_MII1_RST); #ifndef CONFIG_FC_ENET_HAS_SCC - clrbits32(bcsr_io,BCSR5_MII2_EN); - clrbits32(bcsr_io,BCSR5_MII2_RST); + clrbits32(bcsr_io, BCSR5_MII2_EN); + clrbits32(bcsr_io, BCSR5_MII2_RST); #endif iounmap(bcsr_io); @@ -182,17 +182,16 @@ void __init mpc885ads_board_setup(void) #endif #ifdef CONFIG_PCMCIA_M8XX - /*Set up board specific hook-ups*/ + /*Set up board specific hook-ups */ m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup; m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage; #endif } - -static void init_fec1_ioports(struct fs_platform_info* ptr) +static void init_fec1_ioports(struct fs_platform_info *ptr) { - cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm); - iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport); + cpm8xx_t *cp = (cpm8xx_t *) immr_map(im_cpm); + iop8xx_t *io_port = (iop8xx_t *) immr_map(im_ioport); /* configure FEC1 pins */ setbits16(&io_port->iop_papar, 0xf830); @@ -214,11 +213,10 @@ static void init_fec1_ioports(struct fs_platform_info* ptr) immr_unmap(cp); } - -static void init_fec2_ioports(struct fs_platform_info* ptr) +static void init_fec2_ioports(struct fs_platform_info *ptr) { - cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm); - iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport); + cpm8xx_t *cp = (cpm8xx_t *) immr_map(im_cpm); + iop8xx_t *io_port = (iop8xx_t *) immr_map(im_ioport); /* configure FEC2 pins */ setbits32(&cp->cp_pepar, 0x0003fffc); @@ -248,15 +246,15 @@ void init_fec_ioports(struct fs_platform_info *fpi) } } -static void init_scc3_ioports(struct fs_platform_info* fpi) +static void init_scc3_ioports(struct fs_platform_info *fpi) { unsigned *bcsr_io; iop8xx_t *io_port; cpm8xx_t *cp; bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE); - io_port = (iop8xx_t *)immr_map(im_ioport); - cp = (cpm8xx_t *)immr_map(im_cpm); + io_port = (iop8xx_t *) immr_map(im_ioport); + cp = (cpm8xx_t *) immr_map(im_cpm); if (bcsr_io == NULL) { printk(KERN_CRIT "Could not remap BCSR\n"); @@ -265,9 +263,9 @@ static void init_scc3_ioports(struct fs_platform_info* fpi) /* Enable the PHY. */ - clrbits32(bcsr_io+4, BCSR4_ETH10_RST); + clrbits32(bcsr_io + 4, BCSR4_ETH10_RST); udelay(1000); - setbits32(bcsr_io+4, BCSR4_ETH10_RST); + setbits32(bcsr_io + 4, BCSR4_ETH10_RST); /* Configure port A pins for Txd and Rxd. */ setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD); @@ -283,8 +281,7 @@ static void init_scc3_ioports(struct fs_platform_info* fpi) */ setbits32(&cp->cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK); clrbits32(&cp->cp_pepar, PE_ENET_TENA); - clrbits32(&cp->cp_pedir, - PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA); + clrbits32(&cp->cp_pedir, PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA); clrbits32(&cp->cp_peso, PE_ENET_TCLK | PE_ENET_RCLK); setbits32(&cp->cp_peso, PE_ENET_TENA); @@ -308,7 +305,7 @@ static void init_scc3_ioports(struct fs_platform_info* fpi) clrbits32(&cp->cp_pedir, PE_ENET_TENA); setbits32(&cp->cp_peso, PE_ENET_TENA); - setbits32(bcsr_io+4, BCSR1_ETHEN); + setbits32(bcsr_io + 4, BCSR1_ETHEN); iounmap(bcsr_io); immr_unmap(io_port); immr_unmap(cp); @@ -328,50 +325,48 @@ void init_scc_ioports(struct fs_platform_info *fpi) } } - - -static void init_smc1_uart_ioports(struct fs_uart_platform_info* ptr) +static void init_smc1_uart_ioports(struct fs_uart_platform_info *ptr) { - unsigned *bcsr_io; + unsigned *bcsr_io; cpm8xx_t *cp; - cp = (cpm8xx_t *)immr_map(im_cpm); + cp = (cpm8xx_t *) immr_map(im_cpm); setbits32(&cp->cp_pepar, 0x000000c0); clrbits32(&cp->cp_pedir, 0x000000c0); clrbits32(&cp->cp_peso, 0x00000040); setbits32(&cp->cp_peso, 0x00000080); immr_unmap(cp); - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR1\n"); - return; - } - clrbits32(bcsr_io,BCSR1_RS232EN_1); - iounmap(bcsr_io); + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + clrbits32(bcsr_io, BCSR1_RS232EN_1); + iounmap(bcsr_io); } -static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi) +static void init_smc2_uart_ioports(struct fs_uart_platform_info *fpi) { - unsigned *bcsr_io; + unsigned *bcsr_io; cpm8xx_t *cp; - cp = (cpm8xx_t *)immr_map(im_cpm); + cp = (cpm8xx_t *) immr_map(im_cpm); setbits32(&cp->cp_pepar, 0x00000c00); clrbits32(&cp->cp_pedir, 0x00000c00); clrbits32(&cp->cp_peso, 0x00000400); setbits32(&cp->cp_peso, 0x00000800); immr_unmap(cp); - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR1\n"); - return; - } - clrbits32(bcsr_io,BCSR1_RS232EN_2); - iounmap(bcsr_io); + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + clrbits32(bcsr_io, BCSR1_RS232EN_2); + iounmap(bcsr_io); } void init_smc_ioports(struct fs_uart_platform_info *data) @@ -444,15 +439,11 @@ static int __init mpc885ads_probe(void) return 1; } -define_machine(mpc885_ads) { - .name = "MPC885 ADS", - .probe = mpc885ads_probe, - .setup_arch = mpc885ads_setup_arch, - .init_IRQ = m8xx_pic_init, - .show_cpuinfo = mpc8xx_show_cpuinfo, - .get_irq = mpc8xx_get_irq, - .restart = mpc8xx_restart, - .calibrate_decr = mpc8xx_calibrate_decr, - .set_rtc_time = mpc8xx_set_rtc_time, - .get_rtc_time = mpc8xx_get_rtc_time, -}; +define_machine(mpc885_ads) +{ +.name = "MPC885 ADS",.probe = mpc885ads_probe,.setup_arch = + mpc885ads_setup_arch,.init_IRQ = + m8xx_pic_init,.show_cpuinfo = mpc8xx_show_cpuinfo,.get_irq = + mpc8xx_get_irq,.restart = mpc8xx_restart,.calibrate_decr = + mpc8xx_calibrate_decr,.set_rtc_time = + mpc8xx_set_rtc_time,.get_rtc_time = mpc8xx_get_rtc_time,}; diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index 3b40f9623c..3c45142c40 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -113,7 +113,7 @@ MODULE_LICENSE("Dual MPL/GPL"); #define CONFIG_PCMCIA_SLOT_B #endif -#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */ +#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */ #if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B) @@ -146,9 +146,9 @@ MODULE_LICENSE("Dual MPL/GPL"); /* ------------------------------------------------------------------------- */ -#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */ -#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */ -#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */ +#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */ +#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */ +#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */ /* ------------------------------------------------------------------------- */ static int pcmcia_schlvl; @@ -169,8 +169,8 @@ static u32 *m8xx_pgcrx[2]; */ struct pcmcia_win { - u32 br; - u32 or; + u32 br; + u32 or; }; /* @@ -214,7 +214,7 @@ struct pcmcia_win { /* we keep one lookup table per socket to check flags */ -#define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */ +#define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */ struct event_table { u32 regbit; @@ -224,8 +224,8 @@ struct event_table { static const char driver_name[] = "m8xx-pcmcia"; struct socket_info { - void (*handler)(void *info, u32 events); - void *info; + void (*handler) (void *info, u32 events); + void *info; u32 slot; pcmconf8xx_t *pcmcia; @@ -234,7 +234,7 @@ struct socket_info { socket_state_t state; struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO]; - struct pccard_io_map io_win[PCMCIA_IO_WIN_NO]; + struct pccard_io_map io_win[PCMCIA_IO_WIN_NO]; struct event_table events[PCMCIA_EVENTS_MAX]; struct pcmcia_socket socket; }; @@ -248,8 +248,7 @@ static struct socket_info socket[PCMCIA_SOCKETS_NO]; #define M8XX_SIZES_NO 32 -static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] = -{ +static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] = { 0x00000001, 0x00000002, 0x00000008, 0x00000004, 0x00000080, 0x00000040, 0x00000010, 0x00000020, 0x00008000, 0x00004000, 0x00001000, 0x00002000, @@ -265,7 +264,7 @@ static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] = static irqreturn_t m8xx_interrupt(int irq, void *dev); -#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */ +#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */ /* ------------------------------------------------------------------------- */ /* board specific stuff: */ @@ -289,8 +288,9 @@ static int voltage_set(int slot, int vcc, int vpp) { u32 reg = 0; - switch(vcc) { - case 0: break; + switch (vcc) { + case 0: + break; case 33: reg |= BCSR1_PCVCTL4; break; @@ -301,11 +301,12 @@ static int voltage_set(int slot, int vcc, int vpp) return 1; } - switch(vpp) { - case 0: break; + switch (vpp) { + case 0: + break; case 33: case 50: - if(vcc == vpp) + if (vcc == vpp) reg |= BCSR1_PCVCTL6; else return 1; @@ -316,25 +317,29 @@ static int voltage_set(int slot, int vcc, int vpp) return 1; } - if(!((vcc == 50) || (vcc == 0))) + if (!((vcc == 50) || (vcc == 0))) return 1; /* first, turn off all power */ - out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5 | BCSR1_PCVCTL6 | BCSR1_PCVCTL7)); + out_be32(((u32 *) RPX_CSR_ADDR), + in_be32(((u32 *) RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 | + BCSR1_PCVCTL5 | + BCSR1_PCVCTL6 | + BCSR1_PCVCTL7)); /* enable new powersettings */ - out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) | reg); + out_be32(((u32 *) RPX_CSR_ADDR), in_be32(((u32 *) RPX_CSR_ADDR)) | reg); return 0; } #define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V -#define hardware_enable(_slot_) /* No hardware to enable */ -#define hardware_disable(_slot_) /* No hardware to disable */ +#define hardware_enable(_slot_) /* No hardware to enable */ +#define hardware_disable(_slot_) /* No hardware to disable */ -#endif /* CONFIG_RPXCLASSIC */ +#endif /* CONFIG_RPXCLASSIC */ /* FADS Boards from Motorola */ @@ -346,43 +351,45 @@ static int voltage_set(int slot, int vcc, int vpp) { u32 reg = 0; - switch(vcc) { - case 0: - break; - case 33: - reg |= BCSR1_PCCVCC0; - break; - case 50: - reg |= BCSR1_PCCVCC1; - break; - default: - return 1; + switch (vcc) { + case 0: + break; + case 33: + reg |= BCSR1_PCCVCC0; + break; + case 50: + reg |= BCSR1_PCCVCC1; + break; + default: + return 1; } - switch(vpp) { - case 0: - break; - case 33: - case 50: - if(vcc == vpp) - reg |= BCSR1_PCCVPP1; - else - return 1; - break; - case 120: - if ((vcc == 33) || (vcc == 50)) - reg |= BCSR1_PCCVPP0; - else - return 1; - default: + switch (vpp) { + case 0: + break; + case 33: + case 50: + if (vcc == vpp) + reg |= BCSR1_PCCVPP1; + else return 1; + break; + case 120: + if ((vcc == 33) || (vcc == 50)) + reg |= BCSR1_PCCVPP0; + else + return 1; + default: + return 1; } /* first, turn off all power */ - out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) & ~(BCSR1_PCCVCC_MASK | BCSR1_PCCVPP_MASK)); + out_be32((u32 *) BCSR1, + in_be32((u32 *) BCSR1) & ~(BCSR1_PCCVCC_MASK | + BCSR1_PCCVPP_MASK)); /* enable new powersettings */ - out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) | reg); + out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | reg); return 0; } @@ -391,12 +398,12 @@ static int voltage_set(int slot, int vcc, int vpp) static void hardware_enable(int slot) { - out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) & ~BCSR1_PCCEN); + out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) & ~BCSR1_PCCEN); } static void hardware_disable(int slot) { - out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) | BCSR1_PCCEN); + out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | BCSR1_PCCEN); } #endif @@ -410,7 +417,7 @@ static void hardware_disable(int slot) static inline void hardware_enable(int slot) { - m8xx_pcmcia_ops.hw_ctrl(slot, 1); + m8xx_pcmcia_ops.hw_ctrl(slot, 1); } static inline void hardware_disable(int slot) @@ -436,52 +443,53 @@ static int voltage_set(int slot, int vcc, int vpp) { u8 reg = 0; - switch(vcc) { - case 0: - break; - case 33: - reg |= CSR2_VCC_33; - break; - case 50: - reg |= CSR2_VCC_50; - break; - default: - return 1; + switch (vcc) { + case 0: + break; + case 33: + reg |= CSR2_VCC_33; + break; + case 50: + reg |= CSR2_VCC_50; + break; + default: + return 1; } - switch(vpp) { - case 0: - break; - case 33: - case 50: - if(vcc == vpp) - reg |= CSR2_VPP_VCC; - else - return 1; - break; - case 120: - if ((vcc == 33) || (vcc == 50)) - reg |= CSR2_VPP_12; - else - return 1; - default: + switch (vpp) { + case 0: + break; + case 33: + case 50: + if (vcc == vpp) + reg |= CSR2_VPP_VCC; + else + return 1; + break; + case 120: + if ((vcc == 33) || (vcc == 50)) + reg |= CSR2_VPP_12; + else return 1; + default: + return 1; } /* first, turn off all power */ - out_8((u8 *)MBX_CSR2_ADDR, in_8((u8 *)MBX_CSR2_ADDR) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK)); + out_8((u8 *) MBX_CSR2_ADDR, + in_8((u8 *) MBX_CSR2_ADDR) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK)); /* enable new powersettings */ - out_8((u8 *)MBX_CSR2_ADDR, in_8((u8 *)MBX_CSR2_ADDR) | reg); + out_8((u8 *) MBX_CSR2_ADDR, in_8((u8 *) MBX_CSR2_ADDR) | reg); return 0; } #define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V -#define hardware_enable(_slot_) /* No hardware to enable */ -#define hardware_disable(_slot_) /* No hardware to disable */ +#define hardware_enable(_slot_) /* No hardware to enable */ +#define hardware_disable(_slot_) /* No hardware to disable */ -#endif /* CONFIG_MBX */ +#endif /* CONFIG_MBX */ #if defined(CONFIG_PRxK) #include @@ -495,43 +503,46 @@ static int voltage_set(int slot, int vcc, int vpp) u8 regread; cpld_regs *ccpld = get_cpld(); - switch(vcc) { - case 0: - break; - case 33: - reg |= PCMCIA_VCC_33; - break; - case 50: - reg |= PCMCIA_VCC_50; - break; - default: - return 1; + switch (vcc) { + case 0: + break; + case 33: + reg |= PCMCIA_VCC_33; + break; + case 50: + reg |= PCMCIA_VCC_50; + break; + default: + return 1; } - switch(vpp) { - case 0: - break; - case 33: - case 50: - if(vcc == vpp) - reg |= PCMCIA_VPP_VCC; - else - return 1; - break; - case 120: - if ((vcc == 33) || (vcc == 50)) - reg |= PCMCIA_VPP_12; - else - return 1; - default: + switch (vpp) { + case 0: + break; + case 33: + case 50: + if (vcc == vpp) + reg |= PCMCIA_VPP_VCC; + else return 1; + break; + case 120: + if ((vcc == 33) || (vcc == 50)) + reg |= PCMCIA_VPP_12; + else + return 1; + default: + return 1; } reg = reg >> (slot << 2); regread = in_8(&ccpld->fpga_pc_ctl); - if (reg != (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) { + if (reg != + (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) { /* enable new powersettings */ - regread = regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)); + regread = + regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> + (slot << 2)); out_8(&ccpld->fpga_pc_ctl, reg | regread); msleep(100); } @@ -540,10 +551,10 @@ static int voltage_set(int slot, int vcc, int vpp) } #define socket_get(_slot_) PCMCIA_SOCKET_KEY_LV -#define hardware_enable(_slot_) /* No hardware to enable */ -#define hardware_disable(_slot_) /* No hardware to disable */ +#define hardware_enable(_slot_) /* No hardware to enable */ +#define hardware_disable(_slot_) /* No hardware to disable */ -#endif /* CONFIG_PRxK */ +#endif /* CONFIG_PRxK */ static u32 pending_events[PCMCIA_SOCKETS_NO]; static DEFINE_SPINLOCK(pending_event_lock); @@ -553,7 +564,7 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev) struct socket_info *s; struct event_table *e; unsigned int i, events, pscr, pipr, per; - pcmconf8xx_t *pcmcia = socket[0].pcmcia; + pcmconf8xx_t *pcmcia = socket[0].pcmcia; dprintk("Interrupt!\n"); /* get interrupt sources */ @@ -562,16 +573,16 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev) pipr = in_be32(&pcmcia->pcmc_pipr); per = in_be32(&pcmcia->pcmc_per); - for(i = 0; i < PCMCIA_SOCKETS_NO; i++) { + for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { s = &socket[i]; e = &s->events[0]; events = 0; - while(e->regbit) { - if(pscr & e->regbit) + while (e->regbit) { + if (pscr & e->regbit) events |= e->eventbit; - e++; + e++; } /* @@ -579,13 +590,11 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev) * not too nice done, * we depend on that CD2 is the bit to the left of CD1... */ - if(events & SS_DETECT) - if(((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^ - (pipr & M8XX_PCMCIA_CD1(i))) - { + if (events & SS_DETECT) + if (((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^ + (pipr & M8XX_PCMCIA_CD1(i))) { events &= ~SS_DETECT; } - #ifdef PCMCIA_GLITCHY_CD /* * I've experienced CD problems with my ADS board. @@ -593,24 +602,23 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev) * real change of Card detection. */ - if((events & SS_DETECT) && - ((pipr & - (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) && - (s->state.Vcc | s->state.Vpp)) { + if ((events & SS_DETECT) && + ((pipr & + (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) && + (s->state.Vcc | s->state.Vpp)) { events &= ~SS_DETECT; /*printk( "CD glitch workaround - CD = 0x%08x!\n", - (pipr & (M8XX_PCMCIA_CD2(i) - | M8XX_PCMCIA_CD1(i))));*/ + (pipr & (M8XX_PCMCIA_CD2(i) + | M8XX_PCMCIA_CD1(i)))); */ } #endif /* call the handler */ dprintk("slot %u: events = 0x%02x, pscr = 0x%08x, " - "pipr = 0x%08x\n", - i, events, pscr, pipr); + "pipr = 0x%08x\n", i, events, pscr, pipr); - if(events) { + if (events) { spin_lock(&pending_event_lock); pending_events[i] |= events; spin_unlock(&pending_event_lock); @@ -643,11 +651,11 @@ static u32 m8xx_get_graycode(u32 size) { u32 k; - for(k = 0; k < M8XX_SIZES_NO; k++) - if(m8xx_size_to_gray[k] == size) + for (k = 0; k < M8XX_SIZES_NO; k++) + if (m8xx_size_to_gray[k] == size) break; - if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1)) + if ((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1)) k = -1; return k; @@ -657,7 +665,7 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq) { u32 reg, clocks, psst, psl, psht; - if(!ns) { + if (!ns) { /* * We get called with IO maps setup to 0ns @@ -665,10 +673,10 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq) * They should be 255ns. */ - if(is_io) + if (is_io) ns = 255; else - ns = 100; /* fast memory if 0 */ + ns = 100; /* fast memory if 0 */ } /* @@ -679,23 +687,23 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq) /* how we want to adjust the timing - in percent */ -#define ADJ 180 /* 80 % longer accesstime - to be sure */ +#define ADJ 180 /* 80 % longer accesstime - to be sure */ clocks = ((bus_freq / 1000) * ns) / 1000; - clocks = (clocks * ADJ) / (100*1000); - if(clocks >= PCMCIA_BMT_LIMIT) { - printk( "Max access time limit reached\n"); - clocks = PCMCIA_BMT_LIMIT-1; + clocks = (clocks * ADJ) / (100 * 1000); + if (clocks >= PCMCIA_BMT_LIMIT) { + printk("Max access time limit reached\n"); + clocks = PCMCIA_BMT_LIMIT - 1; } - psst = clocks / 7; /* setup time */ - psht = clocks / 7; /* hold time */ - psl = (clocks * 5) / 7; /* strobe length */ + psst = clocks / 7; /* setup time */ + psht = clocks / 7; /* hold time */ + psl = (clocks * 5) / 7; /* strobe length */ psst += clocks - (psst + psht + psl); - reg = psst << 12; - reg |= psl << 7; + reg = psst << 12; + reg |= psl << 7; reg |= psht << 16; return reg; @@ -710,8 +718,8 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value) pipr = in_be32(&pcmcia->pcmc_pipr); - *value = ((pipr & (M8XX_PCMCIA_CD1(lsock) - | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0; + *value = ((pipr & (M8XX_PCMCIA_CD1(lsock) + | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0; *value |= (pipr & M8XX_PCMCIA_WP(lsock)) ? SS_WRPROT : 0; if (s->state.flags & SS_IOCARD) @@ -795,16 +803,16 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value) /* read out VS1 and VS2 */ reg = (pipr & M8XX_PCMCIA_VS_MASK(lsock)) - >> M8XX_PCMCIA_VS_SHIFT(lsock); + >> M8XX_PCMCIA_VS_SHIFT(lsock); - if(socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) { - switch(reg) { + if (socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) { + switch (reg) { case 1: *value |= SS_3VCARD; - break; /* GND, NC - 3.3V only */ + break; /* GND, NC - 3.3V only */ case 2: *value |= SS_XVCARD; - break; /* NC. GND - x.xV only */ + break; /* NC. GND - x.xV only */ }; } @@ -812,7 +820,7 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value) return 0; } -static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state) +static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t * state) { int lsock = container_of(sock, struct socket_info, socket)->slot; struct socket_info *s = &socket[lsock]; @@ -821,20 +829,20 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state) unsigned long flags; pcmconf8xx_t *pcmcia = socket[0].pcmcia; - dprintk( "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, " - "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags, - state->Vcc, state->Vpp, state->io_irq, state->csc_mask); + dprintk("SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, " + "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags, + state->Vcc, state->Vpp, state->io_irq, state->csc_mask); /* First, set voltage - bail out if invalid */ - if(voltage_set(lsock, state->Vcc, state->Vpp)) + if (voltage_set(lsock, state->Vcc, state->Vpp)) return -EINVAL; - /* Take care of reset... */ - if(state->flags & SS_RESET) - out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */ + if (state->flags & SS_RESET) + out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */ else - out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET); + out_be32(M8XX_PGCRX(lsock), + in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET); /* ... and output enable. */ @@ -846,10 +854,11 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state) no pullups are present -> the cards act wierd. So right now the buffers are enabled if the power is on. */ - if(state->Vcc || state->Vpp) - out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */ + if (state->Vcc || state->Vpp) + out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */ else - out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE); + out_be32(M8XX_PGCRX(lsock), + in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE); /* * We'd better turn off interrupts before @@ -866,17 +875,17 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state) e = &s->events[0]; reg = 0; - if(state->csc_mask & SS_DETECT) { + if (state->csc_mask & SS_DETECT) { e->eventbit = SS_DETECT; reg |= e->regbit = (M8XX_PCMCIA_CD2(lsock) | M8XX_PCMCIA_CD1(lsock)); e++; } - if(state->flags & SS_IOCARD) { + if (state->flags & SS_IOCARD) { /* * I/O card */ - if(state->csc_mask & SS_STSCHG) { + if (state->csc_mask & SS_STSCHG) { e->eventbit = SS_STSCHG; reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock); e++; @@ -884,9 +893,10 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state) /* * If io_irq is non-zero we should enable irq. */ - if(state->io_irq) { + if (state->io_irq) { out_be32(M8XX_PGCRX(lsock), - in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(s->hwirq) << 24); + in_be32(M8XX_PGCRX(lsock)) | + mk_int_int_mask(s->hwirq) << 24); /* * Strange thing here: * The manual does not tell us which interrupt @@ -897,33 +907,32 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state) * have to be cleared in PSCR in the interrupt handler. */ reg |= M8XX_PCMCIA_RDY_L(lsock); - } - else - out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff); - } - else { + } else + out_be32(M8XX_PGCRX(lsock), + in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff); + } else { /* * Memory card */ - if(state->csc_mask & SS_BATDEAD) { + if (state->csc_mask & SS_BATDEAD) { e->eventbit = SS_BATDEAD; reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock); e++; } - if(state->csc_mask & SS_BATWARN) { + if (state->csc_mask & SS_BATWARN) { e->eventbit = SS_BATWARN; reg |= e->regbit = M8XX_PCMCIA_BVD2(lsock); e++; } /* What should I trigger on - low/high,raise,fall? */ - if(state->csc_mask & SS_READY) { + if (state->csc_mask & SS_READY) { e->eventbit = SS_READY; - reg |= e->regbit = 0; //?? + reg |= e->regbit = 0; //?? e++; } } - e->regbit = 0; /* terminate list */ + e->regbit = 0; /* terminate list */ /* * Clear the status changed . @@ -940,7 +949,9 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state) * Ones will enable the interrupt. */ - reg |= in_be32(&pcmcia->pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1)); + reg |= + in_be32(&pcmcia-> + pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1)); out_be32(&pcmcia->pcmc_per, reg); spin_unlock_irqrestore(&events_lock, flags); @@ -961,67 +972,66 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) unsigned int reg, winnr; pcmconf8xx_t *pcmcia = s->pcmcia; - #define M8XX_SIZE (io->stop - io->start + 1) #define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start) - dprintk( "SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags, - io->speed, io->start, io->stop); + dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, " + "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags, + io->speed, io->start, io->stop); if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff) || (io->stop > 0xffff) || (io->stop < io->start)) return -EINVAL; - if((reg = m8xx_get_graycode(M8XX_SIZE)) == -1) + if ((reg = m8xx_get_graycode(M8XX_SIZE)) == -1) return -EINVAL; - if(io->flags & MAP_ACTIVE) { + if (io->flags & MAP_ACTIVE) { - dprintk( "io->flags & MAP_ACTIVE\n"); + dprintk("io->flags & MAP_ACTIVE\n"); winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO) - + (lsock * PCMCIA_IO_WIN_NO) + io->map; + + (lsock * PCMCIA_IO_WIN_NO) + io->map; /* setup registers */ - w = (void *) &pcmcia->pcmc_pbr0; + w = (void *)&pcmcia->pcmc_pbr0; w += winnr; - out_be32(&w->or, 0); /* turn off window first */ + out_be32(&w->or, 0); /* turn off window first */ out_be32(&w->br, M8XX_BASE); reg <<= 27; - reg |= M8XX_PCMCIA_POR_IO |(lsock << 2); + reg |= M8XX_PCMCIA_POR_IO | (lsock << 2); reg |= m8xx_get_speed(io->speed, 1, s->bus_freq); - if(io->flags & MAP_WRPROT) + if (io->flags & MAP_WRPROT) reg |= M8XX_PCMCIA_POR_WRPROT; - /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ))*/ - if(io->flags & MAP_16BIT) + /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ)) */ + if (io->flags & MAP_16BIT) reg |= M8XX_PCMCIA_POR_16BIT; - if(io->flags & MAP_ACTIVE) + if (io->flags & MAP_ACTIVE) reg |= M8XX_PCMCIA_POR_VALID; out_be32(&w->or, reg); dprintk("Socket %u: Mapped io window %u at %#8.8x, " - "OR = %#8.8x.\n", lsock, io->map, w->br, w->or); + "OR = %#8.8x.\n", lsock, io->map, w->br, w->or); } else { /* shutdown IO window */ winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO) - + (lsock * PCMCIA_IO_WIN_NO) + io->map; + + (lsock * PCMCIA_IO_WIN_NO) + io->map; /* setup registers */ - w = (void *) &pcmcia->pcmc_pbr0; + w = (void *)&pcmcia->pcmc_pbr0; w += winnr; - out_be32(&w->or, 0); /* turn off window */ - out_be32(&w->br, 0); /* turn off base address */ + out_be32(&w->or, 0); /* turn off window */ + out_be32(&w->br, 0); /* turn off base address */ dprintk("Socket %u: Unmapped io window %u at %#8.8x, " "OR = %#8.8x.\n", lsock, io->map, w->br, w->or); @@ -1029,15 +1039,14 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) /* copy the struct and modify the copy */ s->io_win[io->map] = *io; - s->io_win[io->map].flags &= (MAP_WRPROT - | MAP_16BIT - | MAP_ACTIVE); + s->io_win[io->map].flags &= (MAP_WRPROT | MAP_16BIT | MAP_ACTIVE); dprintk("SetIOMap exit\n"); return 0; } -static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *mem) +static int m8xx_set_mem_map(struct pcmcia_socket *sock, + struct pccard_mem_map *mem) { int lsock = container_of(sock, struct socket_info, socket)->slot; struct socket_info *s = &socket[lsock]; @@ -1046,19 +1055,19 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m unsigned int reg, winnr; pcmconf8xx_t *pcmcia = s->pcmcia; - dprintk( "SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, " + "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, + mem->speed, mem->static_start, mem->card_start); if ((mem->map >= PCMCIA_MEM_WIN_NO) -// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE) +// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE) || (mem->card_start >= 0x04000000) - || (mem->static_start & 0xfff) /* 4KByte resolution */ - || (mem->card_start & 0xfff)) + || (mem->static_start & 0xfff) /* 4KByte resolution */ + ||(mem->card_start & 0xfff)) return -EINVAL; - if((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) { - printk( "Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE); + if ((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) { + printk("Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE); return -EINVAL; } reg <<= 27; @@ -1067,50 +1076,47 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m /* Setup the window in the pcmcia controller */ - w = (void *) &pcmcia->pcmc_pbr0; + w = (void *)&pcmcia->pcmc_pbr0; w += winnr; reg |= lsock << 2; reg |= m8xx_get_speed(mem->speed, 0, s->bus_freq); - if(mem->flags & MAP_ATTRIB) - reg |= M8XX_PCMCIA_POR_ATTRMEM; + if (mem->flags & MAP_ATTRIB) + reg |= M8XX_PCMCIA_POR_ATTRMEM; - if(mem->flags & MAP_WRPROT) + if (mem->flags & MAP_WRPROT) reg |= M8XX_PCMCIA_POR_WRPROT; - if(mem->flags & MAP_16BIT) + if (mem->flags & MAP_16BIT) reg |= M8XX_PCMCIA_POR_16BIT; - if(mem->flags & MAP_ACTIVE) + if (mem->flags & MAP_ACTIVE) reg |= M8XX_PCMCIA_POR_VALID; out_be32(&w->or, reg); dprintk("Socket %u: Mapped memory window %u at %#8.8x, " - "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or); + "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or); - if(mem->flags & MAP_ACTIVE) { + if (mem->flags & MAP_ACTIVE) { /* get the new base address */ mem->static_start = PCMCIA_MEM_WIN_BASE + - (PCMCIA_MEM_WIN_SIZE * winnr) - + mem->card_start; + (PCMCIA_MEM_WIN_SIZE * winnr) + + mem->card_start; } dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, + mem->speed, mem->static_start, mem->card_start); /* copy the struct and modify the copy */ old = &s->mem_win[mem->map]; *old = *mem; - old->flags &= (MAP_ATTRIB - | MAP_WRPROT - | MAP_16BIT - | MAP_ACTIVE); + old->flags &= (MAP_ATTRIB | MAP_WRPROT | MAP_16BIT | MAP_ACTIVE); return 0; } @@ -1121,7 +1127,7 @@ static int m8xx_sock_init(struct pcmcia_socket *sock) pccard_io_map io = { 0, 0, 0, 0, 1 }; pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 }; - dprintk( "sock_init(%d)\n", s); + dprintk("sock_init(%d)\n", s); m8xx_set_socket(sock, &dead_socket); for (i = 0; i < PCMCIA_IO_WIN_NO; i++) { @@ -1143,7 +1149,7 @@ static int m8xx_sock_suspend(struct pcmcia_socket *sock) } static struct pccard_operations m8xx_services = { - .init = m8xx_sock_init, + .init = m8xx_sock_init, .suspend = m8xx_sock_suspend, .get_status = m8xx_get_status, .set_socket = m8xx_set_socket, @@ -1151,7 +1157,8 @@ static struct pccard_operations m8xx_services = { .set_mem_map = m8xx_set_mem_map, }; -static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id *match) +static int __init m8xx_probe(struct of_device *ofdev, + const struct of_device_id *match) { struct pcmcia_win *w; unsigned int i, m, hwirq; @@ -1162,49 +1169,50 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id pcmcia_info("%s\n", version); pcmcia = of_iomap(np, 0); - if(pcmcia == NULL) + if (pcmcia == NULL) return -EINVAL; pcmcia_schlvl = irq_of_parse_and_map(np, 0); - hwirq = irq_map[pcmcia_schlvl].hwirq; + hwirq = irq_map[pcmcia_schlvl].hwirq; if (pcmcia_schlvl < 0) return -EINVAL; m8xx_pgcrx[0] = &pcmcia->pcmc_pgcra; m8xx_pgcrx[1] = &pcmcia->pcmc_pgcrb; - pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG " with IRQ %u (%d). \n", pcmcia_schlvl, hwirq); /* Configure Status change interrupt */ - if(request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED, - driver_name, socket)) { + if (request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED, + driver_name, socket)) { pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n", pcmcia_schlvl); return -1; } - w = (void *) &pcmcia->pcmc_pbr0; + w = (void *)&pcmcia->pcmc_pbr0; - out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1)); + out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1)); clrbits32(&pcmcia->pcmc_per, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1)); /* connect interrupt and disable CxOE */ - out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16)); - out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16)); + out_be32(M8XX_PGCRX(0), + M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16)); + out_be32(M8XX_PGCRX(1), + M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16)); /* intialize the fixed memory windows */ - for(i = 0; i < PCMCIA_SOCKETS_NO; i++){ + for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) { out_be32(&w->br, PCMCIA_MEM_WIN_BASE + - (PCMCIA_MEM_WIN_SIZE - * (m + i * PCMCIA_MEM_WIN_NO))); + (PCMCIA_MEM_WIN_SIZE + * (m + i * PCMCIA_MEM_WIN_NO))); - out_be32(&w->or, 0); /* set to not valid */ + out_be32(&w->or, 0); /* set to not valid */ w++; } @@ -1218,10 +1226,11 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id hardware_enable(0); hardware_enable(1); - for (i = 0 ; i < PCMCIA_SOCKETS_NO; i++) { + for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { socket[i].slot = i; socket[i].socket.owner = THIS_MODULE; - socket[i].socket.features = SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP; + socket[i].socket.features = + SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP; socket[i].socket.irq_mask = 0x000; socket[i].socket.map_size = 0x1000; socket[i].socket.io_offset = 0; @@ -1234,7 +1243,6 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id socket[i].bus_freq = ppc_proc_freq; socket[i].hwirq = hwirq; - } for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { @@ -1246,25 +1254,25 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id return 0; } -static int m8xx_remove(struct of_device* ofdev) +static int m8xx_remove(struct of_device *ofdev) { u32 m, i; struct pcmcia_win *w; pcmconf8xx_t *pcmcia = socket[0].pcmcia; for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { - w = (void *) &pcmcia->pcmc_pbr0; + w = (void *)&pcmcia->pcmc_pbr0; out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(i)); out_be32(&pcmcia->pcmc_per, - in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i)); + in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i)); /* turn off interrupt and disable CxOE */ out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE); /* turn off memory windows */ for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) { - out_be32(&w->or, 0); /* set to not valid */ + out_be32(&w->or, 0); /* set to not valid */ w++; } @@ -1299,21 +1307,21 @@ static int m8xx_resume(struct platform_device *pdev) static struct of_device_id m8xx_pcmcia_match[] = { { - .type = "pcmcia", - .compatible = "fsl,pq-pcmcia", - }, + .type = "pcmcia", + .compatible = "fsl,pq-pcmcia", + }, {}, }; MODULE_DEVICE_TABLE(of, m8xx_pcmcia_match); static struct of_platform_driver m8xx_pcmcia_driver = { - .name = (char *) driver_name, - .match_table = m8xx_pcmcia_match, - .probe = m8xx_probe, - .remove = m8xx_remove, - .suspend = m8xx_suspend, - .resume = m8xx_resume, + .name = (char *)driver_name, + .match_table = m8xx_pcmcia_match, + .probe = m8xx_probe, + .remove = m8xx_remove, + .suspend = m8xx_suspend, + .resume = m8xx_resume, }; static int __init m8xx_init(void)