From: Russell King Date: Wed, 21 Jun 2006 19:38:17 +0000 (+0100) Subject: [ARM] nommu: uaccess tweaks X-Git-Tag: v2.6.18-rc1~411^2~10 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=9641c7cc5a7f6d5c9dc9b43eea4e5f8c3c08c94e;p=linux-2.6 [ARM] nommu: uaccess tweaks MMUless systems have only one address space for all threads, so both the usual access_ok() checks, and the exception handling do not make much sense. Hence, discard the fixup and exception tables at link time, use memcpy/memset for the user copy/clearing functions, and define the permission check macros to be constants. Some of this patch was derived from the equivalent patch by Hyok S. Choi. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index f8bb7abd3e..da69e66057 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -109,11 +109,13 @@ EXPORT_SYMBOL(memchr); EXPORT_SYMBOL(__memzero); /* user mem (segment) */ +EXPORT_SYMBOL(__strnlen_user); +EXPORT_SYMBOL(__strncpy_from_user); + +#ifdef CONFIG_MMU EXPORT_SYMBOL(__copy_from_user); EXPORT_SYMBOL(__copy_to_user); EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(__strnlen_user); -EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(__get_user_1); EXPORT_SYMBOL(__get_user_2); @@ -123,6 +125,7 @@ EXPORT_SYMBOL(__put_user_1); EXPORT_SYMBOL(__put_user_2); EXPORT_SYMBOL(__put_user_4); EXPORT_SYMBOL(__put_user_8); +#endif /* crypto hash */ EXPORT_SYMBOL(sha_transform); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 2b254e8859..2df9688a70 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -80,6 +80,10 @@ SECTIONS *(.exit.text) *(.exit.data) *(.exitcall.exit) +#ifndef CONFIG_MMU + *(.fixup) + *(__ex_table) +#endif } .text : { /* Real text segment */ @@ -87,7 +91,9 @@ SECTIONS *(.text) SCHED_TEXT LOCK_TEXT +#ifdef CONFIG_MMU *(.fixup) +#endif *(.gnu.warning) *(.rodata) *(.rodata.*) @@ -142,7 +148,9 @@ SECTIONS */ . = ALIGN(32); __start___ex_table = .; +#ifdef CONFIG_MMU *(__ex_table) +#endif __stop___ex_table = .; /* diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 7b726b627e..30351cd456 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -6,28 +6,31 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ csumpartialcopy.o csumpartialcopyuser.o clearbit.o \ - copy_page.o delay.o findbit.o memchr.o memcpy.o \ + delay.o findbit.o memchr.o memcpy.o \ memmove.o memset.o memzero.o setbit.o \ strncpy_from_user.o strnlen_user.o \ strchr.o strrchr.o \ testchangebit.o testclearbit.o testsetbit.o \ - getuser.o putuser.o clear_user.o \ ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ ucmpdi2.o lib1funcs.o div64.o sha1.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o +mmu-y := clear_user.o copy_page.o getuser.o putuser.o + # the code in uaccess.S is not preemption safe and # probably faster on ARMv3 only ifeq ($(CONFIG_PREEMPT),y) - lib-y += copy_from_user.o copy_to_user.o + mmu-y += copy_from_user.o copy_to_user.o else ifneq ($(CONFIG_CPU_32v3),y) - lib-y += copy_from_user.o copy_to_user.o + mmu-y += copy_from_user.o copy_to_user.o else - lib-y += uaccess.o + mmu-y += uaccess.o endif endif +lib-$(CONFIG_MMU) += $(mmu-y) + ifeq ($(CONFIG_CPU_32v3),y) lib-y += io-readsw-armv3.o io-writesw-armv3.o else diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h index f909dc7530..87aba57a66 100644 --- a/include/asm-arm/uaccess.h +++ b/include/asm-arm/uaccess.h @@ -40,16 +40,25 @@ struct exception_table_entry extern int fixup_exception(struct pt_regs *regs); +/* + * These two are intentionally not defined anywhere - if the kernel + * code generates any references to them, that's a bug. + */ +extern int __get_user_bad(void); +extern int __put_user_bad(void); + /* * Note that this is actually 0x1,0000,0000 */ #define KERNEL_DS 0x00000000 -#define USER_DS TASK_SIZE - #define get_ds() (KERNEL_DS) + +#ifdef CONFIG_MMU + +#define USER_DS TASK_SIZE #define get_fs() (current_thread_info()->addr_limit) -static inline void set_fs (mm_segment_t fs) +static inline void set_fs(mm_segment_t fs) { current_thread_info()->addr_limit = fs; modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER); @@ -75,8 +84,6 @@ static inline void set_fs (mm_segment_t fs) : "cc"); \ flag; }) -#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) - /* * Single-value transfer routines. They automatically use the right * size if we just have the right pointer type. Note that the functions @@ -87,20 +94,10 @@ static inline void set_fs (mm_segment_t fs) * fixup code, but there are a few places where it intrudes on the * main code path. When we only write to user space, there is no * problem. - * - * The "__xxx" versions of the user access functions do not verify the - * address space - it must have been done previously with a separate - * "access_ok()" call. - * - * The "xxx_error" versions set the third argument to EFAULT if an - * error occurs, and leave it unchanged on success. Note that these - * versions are void (ie, don't return a value as such). */ - extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -extern int __get_user_bad(void); #define __get_user_x(__r2,__p,__e,__s,__i...) \ __asm__ __volatile__ ( \ @@ -131,6 +128,74 @@ extern int __get_user_bad(void); __e; \ }) +extern int __put_user_1(void *, unsigned int); +extern int __put_user_2(void *, unsigned int); +extern int __put_user_4(void *, unsigned int); +extern int __put_user_8(void *, unsigned long long); + +#define __put_user_x(__r2,__p,__e,__s) \ + __asm__ __volatile__ ( \ + __asmeq("%0", "r0") __asmeq("%2", "r2") \ + "bl __put_user_" #__s \ + : "=&r" (__e) \ + : "0" (__p), "r" (__r2) \ + : "ip", "lr", "cc") + +#define put_user(x,p) \ + ({ \ + const register typeof(*(p)) __r2 asm("r2") = (x); \ + const register typeof(*(p)) __user *__p asm("r0") = (p);\ + register int __e asm("r0"); \ + switch (sizeof(*(__p))) { \ + case 1: \ + __put_user_x(__r2, __p, __e, 1); \ + break; \ + case 2: \ + __put_user_x(__r2, __p, __e, 2); \ + break; \ + case 4: \ + __put_user_x(__r2, __p, __e, 4); \ + break; \ + case 8: \ + __put_user_x(__r2, __p, __e, 8); \ + break; \ + default: __e = __put_user_bad(); break; \ + } \ + __e; \ + }) + +#else /* CONFIG_MMU */ + +/* + * uClinux has only one addr space, so has simplified address limits. + */ +#define USER_DS KERNEL_DS + +#define segment_eq(a,b) (1) +#define __addr_ok(addr) (1) +#define __range_ok(addr,size) (0) +#define get_fs() (KERNEL_DS) + +static inline void set_fs(mm_segment_t fs) +{ +} + +#define get_user(x,p) __get_user(x,p) +#define put_user(x,p) __put_user(x,p) + +#endif /* CONFIG_MMU */ + +#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) + +/* + * The "__xxx" versions of the user access functions do not verify the + * address space - it must have been done previously with a separate + * "access_ok()" call. + * + * The "xxx_error" versions set the third argument to EFAULT if an + * error occurs, and leave it unchanged on success. Note that these + * versions are void (ie, don't return a value as such). + */ #define __get_user(x,ptr) \ ({ \ long __gu_err = 0; \ @@ -212,43 +277,6 @@ do { \ : "r" (addr), "i" (-EFAULT) \ : "cc") -extern int __put_user_1(void *, unsigned int); -extern int __put_user_2(void *, unsigned int); -extern int __put_user_4(void *, unsigned int); -extern int __put_user_8(void *, unsigned long long); -extern int __put_user_bad(void); - -#define __put_user_x(__r2,__p,__e,__s) \ - __asm__ __volatile__ ( \ - __asmeq("%0", "r0") __asmeq("%2", "r2") \ - "bl __put_user_" #__s \ - : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ - : "ip", "lr", "cc") - -#define put_user(x,p) \ - ({ \ - const register typeof(*(p)) __r2 asm("r2") = (x); \ - const register typeof(*(p)) __user *__p asm("r0") = (p);\ - register int __e asm("r0"); \ - switch (sizeof(*(__p))) { \ - case 1: \ - __put_user_x(__r2, __p, __e, 1); \ - break; \ - case 2: \ - __put_user_x(__r2, __p, __e, 2); \ - break; \ - case 4: \ - __put_user_x(__r2, __p, __e, 4); \ - break; \ - case 8: \ - __put_user_x(__r2, __p, __e, 8); \ - break; \ - default: __e = __put_user_bad(); break; \ - } \ - __e; \ - }) - #define __put_user(x,ptr) \ ({ \ long __pu_err = 0; \ @@ -354,9 +382,16 @@ do { \ : "cc") +#ifdef CONFIG_MMU extern unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n); extern unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n); extern unsigned long __clear_user(void __user *addr, unsigned long n); +#else +#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0) +#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0) +#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0) +#endif + extern unsigned long __strncpy_from_user(char *to, const char __user *from, unsigned long count); extern unsigned long __strnlen_user(const char __user *s, long n);