From: Mauro Carvalho Chehab Date: Fri, 28 Mar 2008 20:52:44 +0000 (-0300) Subject: V4L/DVB (7458): saa7134: Adds analog support for Avermedia A16D X-Git-Tag: v2.6.26-rc1~1084^2~231 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=95a2fdb6f78c020026b4fa82be506ef92961a9f6;p=linux-2.6 V4L/DVB (7458): saa7134: Adds analog support for Avermedia A16D Thanks to timf , "Richard (MQ)" and gian luca rasponi for their tests. Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index c323ca005f..cfa13c2fb1 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5217,6 +5217,13 @@ static int saa7134_xc2028_callback(struct saa7134_dev *dev, case XC2028_TUNER_RESET: saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000); + mdelay(250); + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0); + mdelay(250); + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000); + mdelay(250); saa_andorl(SAA7133_ANALOG_IO_SELECT >> 2, 0x02, 0x02); saa_andorl(SAA7134_ANALOG_IN_CTRL1 >> 2, 0x81, 0x81); saa_andorl(SAA7134_AUDIO_CLOCK0 >> 2, 0x03187de7, 0x03187de7); @@ -5413,10 +5420,15 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: case SAA7134_BOARD_AVERMEDIA_M115: case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: + case SAA7134_BOARD_AVERMEDIA_A16D: + /* power-down tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0); + msleep(10); /* power-up tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff); - msleep(1); + msleep(10); break; case SAA7134_BOARD_RTD_VFG7350: @@ -5709,9 +5721,14 @@ int saa7134_board_init2(struct saa7134_dev *dev) ctl.fname = XC2028_DEFAULT_FIRMWARE; ctl.max_len = 64; - /* FIXME: This should be device-dependent */ - ctl.demod = XC3028_FE_OREN538; - ctl.mts = 1; + switch (dev->board) { + case SAA7134_BOARD_AVERMEDIA_A16D: + ctl.demod = XC3028_FE_ZARLINK456; + break; + default: + ctl.demod = XC3028_FE_OREN538; + ctl.mts = 1; + } xc2028_cfg.tuner = TUNER_XC2028; xc2028_cfg.priv = &ctl; diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 9f8730bc6e..5c84f45ecb 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -151,6 +151,26 @@ static int mt352_aver777_init(struct dvb_frontend* fe) return 0; } +static int mt352_aver_a16d_init(struct dvb_frontend *fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + + + static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { @@ -193,6 +213,11 @@ static struct mt352_config avermedia_777 = { .demod_init = mt352_aver777_init, }; +static struct mt352_config avermedia_16d = { + .demod_address = 0xf, + .demod_init = mt352_aver_a16d_init, +}; + static struct mt352_config avermedia_e506r_mt352_dev = { .demod_address = (0x1e >> 1), .no_tuner = 1, @@ -935,6 +960,12 @@ static int dvb_init(struct saa7134_dev *dev) TUNER_PHILIPS_TD1316); } break; + case SAA7134_BOARD_AVERMEDIA_A16D: + dprintk("avertv A16D dvb setup\n"); + dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_16d, + &dev->i2c_adap); + attach_xc3028 = 1; + break; case SAA7134_BOARD_MD7134: dev->dvb.frontend = dvb_attach(tda10046_attach, &medion_cardbus, @@ -1205,6 +1236,10 @@ static int dvb_init(struct saa7134_dev *dev) .i2c_adap = &dev->i2c_adap, .i2c_addr = 0x61, }; + + if (!dev->dvb.frontend) + return -1; + fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg); if (!fe) { printk(KERN_ERR "%s/2: xc3028 attach failed\n",