From: Mike Frysinger <michael.frysinger@analog.com>
Date: Thu, 12 Jul 2007 03:50:43 +0000 (+0800)
Subject: Blackfin arch: scrub dead code
X-Git-Tag: v2.6.23-rc1~1111^2~15
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=9401e618c8f70920f34893946239e24d40a3519a;p=linux-2.6

Blackfin arch: scrub dead code

we converted to using a system call for userspace spinlocks
rather than a dedicated exception long ago

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
---

diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 114277bb46..3909f5b355 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -193,15 +193,14 @@ asmlinkage void trap_c(struct pt_regs *fp)
 #else
 	/* 0x02 - User Defined, Caught by default */
 #endif
-	/* 0x03  - Atomic test and set */
+	/* 0x03 - User Defined, userspace stack overflow */
 	case VEC_EXCPT03:
 		info.si_code = SEGV_STACKFLOW;
 		sig = SIGSEGV;
 		printk(KERN_EMERG EXC_0x03);
 		CHK_DEBUGGER_TRAP();
 		break;
-	/* 0x04 - spinlock - handled by _ex_spinlock,
-		getting here is an error */
+	/* 0x04 - User Defined, Caught by default */
 	/* 0x05 - User Defined, Caught by default */
 	/* 0x06 - User Defined, Caught by default */
 	/* 0x07 - User Defined, Caught by default */
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index fa4e633631..d61bba98fb 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -97,17 +97,6 @@ ENTRY(_ex_icplb)
 	rtx;
 ENDPROC(_ex_icplb)
 
-ENTRY(_ex_spinlock)
-	/* Transform this into a syscall - twiddle the syscall vector.  */
-	p5.l = lo(EVT15);
-	p5.h = hi(EVT15);
-	r7.l = _spinlock_bh;
-	r7.h = _spinlock_bh;
-	[p5] = r7;
-	csync;
-	/* Fall through.  */
-ENDPROC(_ex_spinlock)
-
 ENTRY(_ex_syscall)
 	DEBUG_START_HWTRACE(p5, r7)
 	(R7:6,P5:4) = [sp++];
@@ -117,26 +106,6 @@ ENTRY(_ex_syscall)
 	rtx
 ENDPROC(_ex_syscall)
 
-ENTRY(_spinlock_bh)
-	SAVE_ALL_SYS
-	/* To end up here, vector 15 was changed - so we have to change it
-	 * back.
-	 */
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _evt_system_call;
-	p1.h = _evt_system_call;
-	[p0] = p1;
-	csync;
-	r0 = [sp + PT_R0];
-	sp += -12;
-	call _sys_bfin_spinlock;
-	sp += 12;
-	[SP + PT_R0] = R0;
-	RESTORE_ALL_SYS
-	rti;
-ENDPROC(_spinlock_bh)
-
 ENTRY(_ex_soft_bp)
 	r7 = retx;
 	r7 += -2;
@@ -775,14 +744,14 @@ ENDPROC(_init_exception_buff)
 ALIGN
 _extable:
 	/* entry for each EXCAUSE[5:0]
-	 * This table bmust be in sync with the table in ./kernel/traps.c
+	 * This table must be in sync with the table in ./kernel/traps.c
 	 * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
 	 */
 	.long _ex_syscall;      /* 0x00 - User Defined - Linux Syscall */
 	.long _ex_soft_bp       /* 0x01 - User Defined - Software breakpoint */
 	.long _ex_trap_c        /* 0x02 - User Defined */
-	.long _ex_trap_c        /* 0x03 - User Defined  - Atomic test and set service */
-	.long _ex_spinlock      /* 0x04 - User Defined */
+	.long _ex_trap_c        /* 0x03 - User Defined - userspace stack overflow */
+	.long _ex_trap_c        /* 0x04 - User Defined */
 	.long _ex_trap_c        /* 0x05 - User Defined */
 	.long _ex_trap_c        /* 0x06 - User Defined */
 	.long _ex_trap_c        /* 0x07 - User Defined */