From: Tejun Heo Date: Mon, 6 Aug 2007 09:36:23 +0000 (+0900) Subject: libata-link: linkify PHY-related functions X-Git-Tag: v2.6.24-rc1~1391^2~115 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=936fd7328657884d5a69a55666c74a55aa83ca27;p=linux-2.6 libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c72fa468a6..6e5f69a3a0 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1052,7 +1052,7 @@ static int ahci_do_softreset(struct ata_port *ap, unsigned int *class, DPRINTK("ENTER\n"); - if (ata_port_offline(ap)) { + if (ata_link_offline(&ap->link)) { DPRINTK("PHY reports no device\n"); *class = ATA_DEV_NONE; return 0; @@ -1140,7 +1140,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class, ahci_start_engine(ap); - if (rc == 0 && ata_port_online(ap)) + if (rc == 0 && ata_link_online(&ap->link)) *class = ahci_dev_classify(ap); if (*class == ATA_DEV_UNKNOWN) *class = ATA_DEV_NONE; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index f30c4771b3..6f99dee6b6 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2201,7 +2201,7 @@ int ata_bus_probe(struct ata_port *ap) /* This is the last chance, better to slow * down than lose it. */ - sata_down_spd_limit(ap); + sata_down_spd_limit(&ap->link); ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); } } @@ -2230,28 +2230,28 @@ void ata_port_probe(struct ata_port *ap) /** * sata_print_link_status - Print SATA link status - * @ap: SATA port to printk link status about + * @link: SATA link to printk link status about * * This function prints link speed and status of a SATA link. * * LOCKING: * None. */ -void sata_print_link_status(struct ata_port *ap) +void sata_print_link_status(struct ata_link *link) { u32 sstatus, scontrol, tmp; - if (sata_scr_read(ap, SCR_STATUS, &sstatus)) + if (sata_scr_read(link, SCR_STATUS, &sstatus)) return; - sata_scr_read(ap, SCR_CONTROL, &scontrol); + sata_scr_read(link, SCR_CONTROL, &scontrol); - if (ata_port_online(ap)) { + if (ata_link_online(link)) { tmp = (sstatus >> 4) & 0xf; - ata_port_printk(ap, KERN_INFO, + ata_link_printk(link, KERN_INFO, "SATA link up %s (SStatus %X SControl %X)\n", sata_spd_string(tmp), sstatus, scontrol); } else { - ata_port_printk(ap, KERN_INFO, + ata_link_printk(link, KERN_INFO, "SATA link down (SStatus %X SControl %X)\n", sstatus, scontrol); } @@ -2271,32 +2271,33 @@ void sata_print_link_status(struct ata_port *ap) */ void __sata_phy_reset(struct ata_port *ap) { - u32 sstatus; + struct ata_link *link = &ap->link; unsigned long timeout = jiffies + (HZ * 5); + u32 sstatus; if (ap->flags & ATA_FLAG_SATA_RESET) { /* issue phy wake/reset */ - sata_scr_write_flush(ap, SCR_CONTROL, 0x301); + sata_scr_write_flush(link, SCR_CONTROL, 0x301); /* Couldn't find anything in SATA I/II specs, but * AHCI-1.1 10.4.2 says at least 1 ms. */ mdelay(1); } /* phy wake/clear reset */ - sata_scr_write_flush(ap, SCR_CONTROL, 0x300); + sata_scr_write_flush(link, SCR_CONTROL, 0x300); /* wait for phy to become ready, if necessary */ do { msleep(200); - sata_scr_read(ap, SCR_STATUS, &sstatus); + sata_scr_read(link, SCR_STATUS, &sstatus); if ((sstatus & 0xf) != 1) break; } while (time_before(jiffies, timeout)); /* print link status */ - sata_print_link_status(ap); + sata_print_link_status(link); /* TODO: phy layer with polling, timeouts, etc. */ - if (!ata_port_offline(ap)) + if (!ata_link_offline(link)) ata_port_probe(ap); else ata_port_disable(ap); @@ -2370,9 +2371,9 @@ void ata_port_disable(struct ata_port *ap) /** * sata_down_spd_limit - adjust SATA spd limit downward - * @ap: Port to adjust SATA spd limit for + * @link: Link to adjust SATA spd limit for * - * Adjust SATA spd limit of @ap downward. Note that this + * Adjust SATA spd limit of @link downward. Note that this * function only adjusts the limit. The change must be applied * using sata_set_spd(). * @@ -2382,24 +2383,24 @@ void ata_port_disable(struct ata_port *ap) * RETURNS: * 0 on success, negative errno on failure */ -int sata_down_spd_limit(struct ata_port *ap) +int sata_down_spd_limit(struct ata_link *link) { u32 sstatus, spd, mask; int rc, highbit; - if (!sata_scr_valid(ap)) + if (!sata_scr_valid(link)) return -EOPNOTSUPP; /* If SCR can be read, use it to determine the current SPD. - * If not, use cached value in ap->sata_spd. + * If not, use cached value in link->sata_spd. */ - rc = sata_scr_read(ap, SCR_STATUS, &sstatus); + rc = sata_scr_read(link, SCR_STATUS, &sstatus); if (rc == 0) spd = (sstatus >> 4) & 0xf; else - spd = ap->link.sata_spd; + spd = link->sata_spd; - mask = ap->link.sata_spd_limit; + mask = link->sata_spd_limit; if (mask <= 1) return -EINVAL; @@ -2419,22 +2420,22 @@ int sata_down_spd_limit(struct ata_port *ap) if (!mask) return -EINVAL; - ap->link.sata_spd_limit = mask; + link->sata_spd_limit = mask; - ata_port_printk(ap, KERN_WARNING, "limiting SATA link speed to %s\n", + ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n", sata_spd_string(fls(mask))); return 0; } -static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) +static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol) { u32 spd, limit; - if (ap->link.sata_spd_limit == UINT_MAX) + if (link->sata_spd_limit == UINT_MAX) limit = 0; else - limit = fls(ap->link.sata_spd_limit); + limit = fls(link->sata_spd_limit); spd = (*scontrol >> 4) & 0xf; *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4); @@ -2444,10 +2445,10 @@ static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) /** * sata_set_spd_needed - is SATA spd configuration needed - * @ap: Port in question + * @link: Link in question * * Test whether the spd limit in SControl matches - * @ap->link.sata_spd_limit. This function is used to determine + * @link->sata_spd_limit. This function is used to determine * whether hardreset is necessary to apply SATA spd * configuration. * @@ -2457,21 +2458,21 @@ static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) * RETURNS: * 1 if SATA spd configuration is needed, 0 otherwise. */ -int sata_set_spd_needed(struct ata_port *ap) +int sata_set_spd_needed(struct ata_link *link) { u32 scontrol; - if (sata_scr_read(ap, SCR_CONTROL, &scontrol)) + if (sata_scr_read(link, SCR_CONTROL, &scontrol)) return 0; - return __sata_set_spd_needed(ap, &scontrol); + return __sata_set_spd_needed(link, &scontrol); } /** * sata_set_spd - set SATA spd according to spd limit - * @ap: Port to set SATA spd for + * @link: Link to set SATA spd for * - * Set SATA spd of @ap according to sata_spd_limit. + * Set SATA spd of @link according to sata_spd_limit. * * LOCKING: * Inherited from caller. @@ -2480,18 +2481,18 @@ int sata_set_spd_needed(struct ata_port *ap) * 0 if spd doesn't need to be changed, 1 if spd has been * changed. Negative errno if SCR registers are inaccessible. */ -int sata_set_spd(struct ata_port *ap) +int sata_set_spd(struct ata_link *link) { u32 scontrol; int rc; - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) return rc; - if (!__sata_set_spd_needed(ap, &scontrol)) + if (!__sata_set_spd_needed(link, &scontrol)) return 0; - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) return rc; return 1; @@ -2997,7 +2998,7 @@ int ata_wait_ready(struct ata_port *ap, unsigned long deadline) if (!(status & ATA_BUSY)) return 0; - if (!ata_port_online(ap) && status == 0xff) + if (!ata_link_online(&ap->link) && status == 0xff) return -ENODEV; if (time_after(now, deadline)) return -EBUSY; @@ -3199,12 +3200,12 @@ err_out: } /** - * sata_phy_debounce - debounce SATA phy status - * @ap: ATA port to debounce SATA phy status for + * sata_link_debounce - debounce SATA phy status + * @link: ATA link to debounce SATA phy status for * @params: timing parameters { interval, duratinon, timeout } in msec * @deadline: deadline jiffies for the operation * - * Make sure SStatus of @ap reaches stable state, determined by +* Make sure SStatus of @link reaches stable state, determined by * holding the same value where DET is not 1 for @duration polled * every @interval, before @timeout. Timeout constraints the * beginning of the stable state. Because DET gets stuck at 1 on @@ -3220,8 +3221,8 @@ err_out: * RETURNS: * 0 on success, -errno on failure. */ -int sata_phy_debounce(struct ata_port *ap, const unsigned long *params, - unsigned long deadline) +int sata_link_debounce(struct ata_link *link, const unsigned long *params, + unsigned long deadline) { unsigned long interval_msec = params[0]; unsigned long duration = msecs_to_jiffies(params[1]); @@ -3233,7 +3234,7 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params, if (time_before(t, deadline)) deadline = t; - if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) return rc; cur &= 0xf; @@ -3242,7 +3243,7 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params, while (1) { msleep(interval_msec); - if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) return rc; cur &= 0xf; @@ -3268,12 +3269,12 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params, } /** - * sata_phy_resume - resume SATA phy - * @ap: ATA port to resume SATA phy for + * sata_link_resume - resume SATA link + * @link: ATA link to resume SATA * @params: timing parameters { interval, duratinon, timeout } in msec * @deadline: deadline jiffies for the operation * - * Resume SATA phy of @ap and debounce it. + * Resume SATA phy @link and debounce it. * * LOCKING: * Kernel thread context (may sleep) @@ -3281,18 +3282,18 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params, * RETURNS: * 0 on success, -errno on failure. */ -int sata_phy_resume(struct ata_port *ap, const unsigned long *params, - unsigned long deadline) +int sata_link_resume(struct ata_link *link, const unsigned long *params, + unsigned long deadline) { u32 scontrol; int rc; - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) return rc; scontrol = (scontrol & 0x0f0) | 0x300; - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) return rc; /* Some PHYs react badly if SStatus is pounded immediately @@ -3300,7 +3301,7 @@ int sata_phy_resume(struct ata_port *ap, const unsigned long *params, */ msleep(200); - return sata_phy_debounce(ap, params, deadline); + return sata_link_debounce(link, params, deadline); } /** @@ -3322,7 +3323,8 @@ int sata_phy_resume(struct ata_port *ap, const unsigned long *params, */ int ata_std_prereset(struct ata_port *ap, unsigned long deadline) { - struct ata_eh_context *ehc = &ap->link.eh_context; + struct ata_link *link = &ap->link; + struct ata_eh_context *ehc = &link->eh_context; const unsigned long *timing = sata_ehc_deb_timing(ehc); int rc; @@ -3335,9 +3337,9 @@ int ata_std_prereset(struct ata_port *ap, unsigned long deadline) if (ehc->i.action & ATA_EH_HARDRESET) return 0; - /* if SATA, resume phy */ + /* if SATA, resume link */ if (ap->flags & ATA_FLAG_SATA) { - rc = sata_phy_resume(ap, timing, deadline); + rc = sata_link_resume(link, timing, deadline); /* whine about phy resume failure but proceed */ if (rc && rc != -EOPNOTSUPP) ata_port_printk(ap, KERN_WARNING, "failed to resume " @@ -3347,7 +3349,7 @@ int ata_std_prereset(struct ata_port *ap, unsigned long deadline) /* Wait for !BSY if the controller can wait for the first D2H * Reg FIS and we don't know that no device is attached. */ - if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) { + if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_link_offline(link)) { rc = ata_wait_ready(ap, deadline); if (rc && rc != -ENODEV) { ata_port_printk(ap, KERN_WARNING, "device not ready " @@ -3376,6 +3378,7 @@ int ata_std_prereset(struct ata_port *ap, unsigned long deadline) int ata_std_softreset(struct ata_port *ap, unsigned int *classes, unsigned long deadline) { + struct ata_link *link = &ap->link; unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; unsigned int devmask = 0; int rc; @@ -3383,7 +3386,7 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes, DPRINTK("ENTER\n"); - if (ata_port_offline(ap)) { + if (ata_link_offline(link)) { classes[0] = ATA_DEV_NONE; goto out; } @@ -3401,7 +3404,7 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes, DPRINTK("about to softreset, devmask=%x\n", devmask); rc = ata_bus_softreset(ap, devmask, deadline); /* if link is occupied, -ENODEV too is an error */ - if (rc && (rc != -ENODEV || sata_scr_valid(ap))) { + if (rc && (rc != -ENODEV || sata_scr_valid(link))) { ata_port_printk(ap, KERN_ERR, "SRST failed (errno=%d)\n", rc); return rc; } @@ -3433,35 +3436,36 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes, int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing, unsigned long deadline) { + struct ata_link *link = &ap->link; u32 scontrol; int rc; DPRINTK("ENTER\n"); - if (sata_set_spd_needed(ap)) { + if (sata_set_spd_needed(link)) { /* SATA spec says nothing about how to reconfigure * spd. To be on the safe side, turn off phy during * reconfiguration. This works for at least ICH7 AHCI * and Sil3124. */ - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) goto out; scontrol = (scontrol & 0x0f0) | 0x304; - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol))) goto out; - sata_set_spd(ap); + sata_set_spd(link); } /* issue phy wake/reset */ - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) goto out; scontrol = (scontrol & 0x0f0) | 0x301; - if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol))) + if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol))) goto out; /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 @@ -3469,8 +3473,8 @@ int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing, */ msleep(1); - /* bring phy back */ - rc = sata_phy_resume(ap, timing, deadline); + /* bring link back */ + rc = sata_link_resume(link, timing, deadline); out: DPRINTK("EXIT, rc=%d\n", rc); return rc; @@ -3494,7 +3498,8 @@ int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing, int sata_std_hardreset(struct ata_port *ap, unsigned int *class, unsigned long deadline) { - const unsigned long *timing = sata_ehc_deb_timing(&ap->link.eh_context); + struct ata_link *link = &ap->link; + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); int rc; DPRINTK("ENTER\n"); @@ -3508,7 +3513,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class, } /* TODO: phy layer with polling, timeouts, etc. */ - if (ata_port_offline(ap)) { + if (ata_link_offline(link)) { *class = ATA_DEV_NONE; DPRINTK("EXIT, link offline\n"); return 0; @@ -3547,16 +3552,17 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class, */ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) { + struct ata_link *link = &ap->link; u32 serror; DPRINTK("ENTER\n"); /* print link status */ - sata_print_link_status(ap); + sata_print_link_status(link); /* clear SError */ - if (sata_scr_read(ap, SCR_ERROR, &serror) == 0) - sata_scr_write(ap, SCR_ERROR, serror); + if (sata_scr_read(link, SCR_ERROR, &serror) == 0) + sata_scr_write(link, SCR_ERROR, serror); /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) @@ -5729,9 +5735,9 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance) /** * sata_scr_valid - test whether SCRs are accessible - * @ap: ATA port to test SCR accessibility for + * @link: ATA link to test SCR accessibility for * - * Test whether SCRs are accessible for @ap. + * Test whether SCRs are accessible for @link. * * LOCKING: * None. @@ -5739,18 +5745,20 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance) * RETURNS: * 1 if SCRs are accessible, 0 otherwise. */ -int sata_scr_valid(struct ata_port *ap) +int sata_scr_valid(struct ata_link *link) { + struct ata_port *ap = link->ap; + return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read; } /** * sata_scr_read - read SCR register of the specified port - * @ap: ATA port to read SCR for + * @link: ATA link to read SCR for * @reg: SCR to read * @val: Place to store read value * - * Read SCR register @reg of @ap into *@val. This function is + * Read SCR register @reg of @link into *@val. This function is * guaranteed to succeed if the cable type of the port is SATA * and the port implements ->scr_read. * @@ -5760,20 +5768,22 @@ int sata_scr_valid(struct ata_port *ap) * RETURNS: * 0 on success, negative errno on failure. */ -int sata_scr_read(struct ata_port *ap, int reg, u32 *val) +int sata_scr_read(struct ata_link *link, int reg, u32 *val) { - if (sata_scr_valid(ap)) + struct ata_port *ap = link->ap; + + if (sata_scr_valid(link)) return ap->ops->scr_read(ap, reg, val); return -EOPNOTSUPP; } /** * sata_scr_write - write SCR register of the specified port - * @ap: ATA port to write SCR for + * @link: ATA link to write SCR for * @reg: SCR to write * @val: value to write * - * Write @val to SCR register @reg of @ap. This function is + * Write @val to SCR register @reg of @link. This function is * guaranteed to succeed if the cable type of the port is SATA * and the port implements ->scr_read. * @@ -5783,16 +5793,18 @@ int sata_scr_read(struct ata_port *ap, int reg, u32 *val) * RETURNS: * 0 on success, negative errno on failure. */ -int sata_scr_write(struct ata_port *ap, int reg, u32 val) +int sata_scr_write(struct ata_link *link, int reg, u32 val) { - if (sata_scr_valid(ap)) + struct ata_port *ap = link->ap; + + if (sata_scr_valid(link)) return ap->ops->scr_write(ap, reg, val); return -EOPNOTSUPP; } /** * sata_scr_write_flush - write SCR register of the specified port and flush - * @ap: ATA port to write SCR for + * @link: ATA link to write SCR for * @reg: SCR to write * @val: value to write * @@ -5805,11 +5817,12 @@ int sata_scr_write(struct ata_port *ap, int reg, u32 val) * RETURNS: * 0 on success, negative errno on failure. */ -int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) +int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) { + struct ata_port *ap = link->ap; int rc; - if (sata_scr_valid(ap)) { + if (sata_scr_valid(link)) { rc = ap->ops->scr_write(ap, reg, val); if (rc == 0) rc = ap->ops->scr_read(ap, reg, &val); @@ -5819,12 +5832,12 @@ int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) } /** - * ata_port_online - test whether the given port is online - * @ap: ATA port to test + * ata_link_online - test whether the given link is online + * @link: ATA link to test * - * Test whether @ap is online. Note that this function returns 0 - * if online status of @ap cannot be obtained, so - * ata_port_online(ap) != !ata_port_offline(ap). + * Test whether @link is online. Note that this function returns + * 0 if online status of @link cannot be obtained, so + * ata_link_online(link) != !ata_link_offline(link). * * LOCKING: * None. @@ -5832,22 +5845,23 @@ int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) * RETURNS: * 1 if the port online status is available and online. */ -int ata_port_online(struct ata_port *ap) +int ata_link_online(struct ata_link *link) { u32 sstatus; - if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) == 0x3) + if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && + (sstatus & 0xf) == 0x3) return 1; return 0; } /** - * ata_port_offline - test whether the given port is offline - * @ap: ATA port to test + * ata_link_offline - test whether the given link is offline + * @link: ATA link to test * - * Test whether @ap is offline. Note that this function returns - * 0 if offline status of @ap cannot be obtained, so - * ata_port_online(ap) != !ata_port_offline(ap). + * Test whether @link is offline. Note that this function + * returns 0 if offline status of @link cannot be obtained, so + * ata_link_online(link) != !ata_link_offline(link). * * LOCKING: * None. @@ -5855,11 +5869,12 @@ int ata_port_online(struct ata_port *ap) * RETURNS: * 1 if the port offline status is available and offline. */ -int ata_port_offline(struct ata_port *ap) +int ata_link_offline(struct ata_link *link) { u32 sstatus; - if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3) + if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && + (sstatus & 0xf) != 0x3) return 1; return 0; } @@ -6397,7 +6412,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) ap->cbl = ATA_CBL_SATA; /* init sata_spd_limit to the current value */ - if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { + if (sata_scr_read(&ap->link, SCR_CONTROL, &scontrol) == 0) { int spd = (scontrol >> 4) & 0xf; if (spd) ap->link.hw_sata_spd_limit &= (1 << spd) - 1; @@ -6924,8 +6939,8 @@ EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); EXPORT_SYMBOL_GPL(ata_port_probe); EXPORT_SYMBOL_GPL(ata_dev_disable); EXPORT_SYMBOL_GPL(sata_set_spd); -EXPORT_SYMBOL_GPL(sata_phy_debounce); -EXPORT_SYMBOL_GPL(sata_phy_resume); +EXPORT_SYMBOL_GPL(sata_link_debounce); +EXPORT_SYMBOL_GPL(sata_link_resume); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); @@ -6952,8 +6967,8 @@ EXPORT_SYMBOL_GPL(sata_scr_valid); EXPORT_SYMBOL_GPL(sata_scr_read); EXPORT_SYMBOL_GPL(sata_scr_write); EXPORT_SYMBOL_GPL(sata_scr_write_flush); -EXPORT_SYMBOL_GPL(ata_port_online); -EXPORT_SYMBOL_GPL(ata_port_offline); +EXPORT_SYMBOL_GPL(ata_link_online); +EXPORT_SYMBOL_GPL(ata_link_offline); #ifdef CONFIG_PM EXPORT_SYMBOL_GPL(ata_host_suspend); EXPORT_SYMBOL_GPL(ata_host_resume); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 8c37ec0bbf..48ca68b397 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1501,7 +1501,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, /* speed down? */ if (verdict & ATA_EH_SPDN_SPEED_DOWN) { /* speed down SATA link speed if possible */ - if (sata_down_spd_limit(dev->link->ap) == 0) { + if (sata_down_spd_limit(dev->link) == 0) { action |= ATA_EH_HARDRESET; goto done; } @@ -1561,7 +1561,8 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, */ static void ata_eh_autopsy(struct ata_port *ap) { - struct ata_eh_context *ehc = &ap->link.eh_context; + struct ata_link *link = &ap->link; + struct ata_eh_context *ehc = &link->eh_context; unsigned int all_err_mask = 0; int tag, is_io = 0; u32 serror; @@ -1573,7 +1574,7 @@ static void ata_eh_autopsy(struct ata_port *ap) return; /* obtain and analyze SError */ - rc = sata_scr_read(ap, SCR_ERROR, &serror); + rc = sata_scr_read(link, SCR_ERROR, &serror); if (rc == 0) { ehc->i.serror |= serror; ata_eh_analyze_serror(ap); @@ -1782,7 +1783,8 @@ static int ata_eh_reset(struct ata_port *ap, int classify, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { - struct ata_eh_context *ehc = &ap->link.eh_context; + struct ata_link *link = &ap->link; + struct ata_eh_context *ehc = &link->eh_context; unsigned int *classes = ehc->classes; int verbose = !(ehc->i.flags & ATA_EHI_QUIET); int try = 0; @@ -1800,7 +1802,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, */ action = ehc->i.action; ehc->i.action &= ~ATA_EH_RESET_MASK; - if (softreset && (!hardreset || (!sata_set_spd_needed(ap) && + if (softreset && (!hardreset || (!sata_set_spd_needed(link) && !(action & ATA_EH_HARDRESET)))) ehc->i.action |= ATA_EH_SOFTRESET; else @@ -1814,7 +1816,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, "port disabled. ignoring.\n"); ehc->i.action &= ~ATA_EH_RESET_MASK; - ata_link_for_each_dev(dev, &ap->link) + ata_link_for_each_dev(dev, link) classes[dev->devno] = ATA_DEV_NONE; rc = 0; @@ -1832,7 +1834,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, reset = softreset; else { /* prereset told us not to reset, bang classes and return */ - ata_link_for_each_dev(dev, &ap->link) + ata_link_for_each_dev(dev, link) classes[dev->devno] = ATA_DEV_NONE; rc = 0; goto out; @@ -1902,7 +1904,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, if (rc == -EPIPE || try == ARRAY_SIZE(ata_eh_reset_timeouts) - 1) - sata_down_spd_limit(ap); + sata_down_spd_limit(link); if (hardreset) reset = hardreset; goto retry; @@ -1914,12 +1916,12 @@ static int ata_eh_reset(struct ata_port *ap, int classify, /* After the reset, the device state is PIO 0 and the * controller state is undefined. Record the mode. */ - ata_link_for_each_dev(dev, &ap->link) + ata_link_for_each_dev(dev, link) dev->pio_mode = XFER_PIO_0; /* record current link speed */ - if (sata_scr_read(ap, SCR_STATUS, &sstatus) == 0) - ap->link.sata_spd = (sstatus >> 4) & 0xf; + if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0) + link->sata_spd = (sstatus >> 4) & 0xf; if (postreset) postreset(ap, classes); @@ -1957,7 +1959,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, readid_flags |= ATA_READID_POSTRESET; if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) { - if (ata_port_offline(ap)) { + if (ata_link_offline(&ap->link)) { rc = -EIO; goto err; } @@ -2079,7 +2081,6 @@ static int ata_eh_skip_recovery(struct ata_port *ap) static void ata_eh_handle_dev_fail(struct ata_device *dev, int err) { - struct ata_port *ap = dev->link->ap; struct ata_eh_context *ehc = &dev->link->eh_context; ehc->tries[dev->devno]--; @@ -2096,7 +2097,7 @@ static void ata_eh_handle_dev_fail(struct ata_device *dev, int err) /* This is the last chance, better to slow * down than lose it. */ - sata_down_spd_limit(ap); + sata_down_spd_limit(dev->link); ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); } } @@ -2106,7 +2107,7 @@ static void ata_eh_handle_dev_fail(struct ata_device *dev, int err) ata_dev_disable(dev); /* detach if offline */ - if (ata_port_offline(ap)) + if (ata_link_offline(dev->link)) ata_eh_detach_dev(dev); /* probe if requested */ diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 2100cd61ed..dd528dbd9c 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -500,7 +500,7 @@ void ata_bmdma_error_handler(struct ata_port *ap) ata_reset_fn_t hardreset; hardreset = NULL; - if (sata_scr_valid(ap)) + if (sata_scr_valid(&ap->link)) hardreset = sata_std_hardreset; ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 564cd234c8..700843a9f3 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -78,8 +78,8 @@ extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags); extern int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags); extern int ata_dev_configure(struct ata_device *dev); -extern int sata_down_spd_limit(struct ata_port *ap); -extern int sata_set_spd_needed(struct ata_port *ap); +extern int sata_down_spd_limit(struct ata_link *link); +extern int sata_set_spd_needed(struct ata_link *link); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); extern void ata_sg_clean(struct ata_queued_cmd *qc); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index aab068fbb7..63fe99a10c 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -612,7 +612,7 @@ static int scc_std_softreset (struct ata_port *ap, unsigned int *classes, DPRINTK("ENTER\n"); - if (ata_port_offline(ap)) { + if (ata_link_offline(&ap->link)) { classes[0] = ATA_DEV_NONE; goto out; } diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index 3c0ef7a2f2..f2b1bea934 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -435,7 +435,7 @@ static int inic_hardreset(struct ata_port *ap, unsigned int *class, msleep(1); writew(val & ~IDMA_CTL_RST_ATA, idma_ctl); - rc = sata_phy_resume(ap, timing, deadline); + rc = sata_link_resume(&ap->link, timing, deadline); if (rc) { ata_port_printk(ap, KERN_WARNING, "failed to resume " "link after reset (errno=%d)\n", rc); @@ -443,7 +443,7 @@ static int inic_hardreset(struct ata_port *ap, unsigned int *class, } *class = ATA_DEV_NONE; - if (ata_port_online(ap)) { + if (ata_link_online(&ap->link)) { struct ata_taskfile tf; /* wait a while before checking status */ diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 246e7c5fdc..8e63c60ada 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1423,8 +1423,8 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc) /* just a guess: do we need to do this? should we * expand this, and do it in all cases? */ - sata_scr_read(ap, SCR_ERROR, &serr); - sata_scr_write_flush(ap, SCR_ERROR, serr); + sata_scr_read(&ap->link, SCR_ERROR, &serr); + sata_scr_write_flush(&ap->link, SCR_ERROR, serr); } edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -1468,8 +1468,8 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc) } if (edma_err_cause & EDMA_ERR_SERR) { - sata_scr_read(ap, SCR_ERROR, &serr); - sata_scr_write_flush(ap, SCR_ERROR, serr); + sata_scr_read(&ap->link, SCR_ERROR, &serr); + sata_scr_write_flush(&ap->link, SCR_ERROR, serr); err_mask = AC_ERR_ATA_BUS; action |= ATA_EH_HARDRESET; } @@ -1687,7 +1687,7 @@ static void mv_pci_error(struct ata_host *host, void __iomem *mmio) for (i = 0; i < host->n_ports; i++) { ap = host->ports[i]; - if (!ata_port_offline(ap)) { + if (!ata_link_offline(&ap->link)) { ehi = &ap->link.eh_info; ata_ehi_clear_desc(ehi); if (!printed++) @@ -2198,14 +2198,14 @@ static void mv_phy_reset(struct ata_port *ap, unsigned int *class, /* Issue COMRESET via SControl */ comreset_retry: - sata_scr_write_flush(ap, SCR_CONTROL, 0x301); + sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x301); msleep(1); - sata_scr_write_flush(ap, SCR_CONTROL, 0x300); + sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x300); msleep(20); do { - sata_scr_read(ap, SCR_STATUS, &sstatus); + sata_scr_read(&ap->link, SCR_STATUS, &sstatus); if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0)) break; @@ -2230,7 +2230,7 @@ comreset_retry: } #endif - if (ata_port_offline(ap)) { + if (ata_link_offline(&ap->link)) { *class = ATA_DEV_NONE; return; } @@ -2285,7 +2285,7 @@ static int mv_prereset(struct ata_port *ap, unsigned long deadline) if (ehc->i.action & ATA_EH_HARDRESET) return 0; - if (ata_port_online(ap)) + if (ata_link_online(&ap->link)) rc = ata_wait_ready(ap, deadline); else rc = -ENODEV; @@ -2313,11 +2313,11 @@ static void mv_postreset(struct ata_port *ap, unsigned int *classes) u32 serr; /* print link status */ - sata_print_link_status(ap); + sata_print_link_status(&ap->link); /* clear SError */ - sata_scr_read(ap, SCR_ERROR, &serr); - sata_scr_write_flush(ap, SCR_ERROR, serr); + sata_scr_read(&ap->link, SCR_ERROR, &serr); + sata_scr_write_flush(&ap->link, SCR_ERROR, serr); /* bail out if no device is present */ if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 620d0675d1..c7238ce835 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -475,7 +475,7 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) buf32[2] = 0; /* no next-packet */ /* select drive */ - if (sata_scr_valid(ap)) { + if (sata_scr_valid(&ap->link)) { dev_sel = PDC_DEVICE_SATA; } else { dev_sel = ATA_DEVICE_OBS; @@ -643,7 +643,7 @@ static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc, | PDC_PCI_SYS_ERR | PDC1_PCI_PARITY_ERR)) ac_err_mask |= AC_ERR_HOST_BUS; - if (sata_scr_valid(ap)) { + if (sata_scr_valid(&ap->link)) { u32 serror; pdc_sata_scr_read(ap, SCR_ERROR, &serror); diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 2d8334e792..0cd40d5215 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -593,7 +593,7 @@ static int sil24_do_softreset(struct ata_port *ap, unsigned int *class, DPRINTK("ENTER\n"); - if (ata_port_offline(ap)) { + if (ata_link_offline(&ap->link)) { DPRINTK("PHY reports no device\n"); *class = ATA_DEV_NONE; goto out; @@ -650,10 +650,10 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class, u32 tmp; /* sil24 does the right thing(tm) without any protection */ - sata_set_spd(ap); + sata_set_spd(&ap->link); tout_msec = 100; - if (ata_port_online(ap)) + if (ata_link_online(&ap->link)) tout_msec = 5000; writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); @@ -663,14 +663,14 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class, /* SStatus oscillates between zero and valid status after * DEV_RST, debounce it. */ - rc = sata_phy_debounce(ap, sata_deb_timing_long, deadline); + rc = sata_link_debounce(&ap->link, sata_deb_timing_long, deadline); if (rc) { reason = "PHY debouncing failed"; goto err; } if (tmp & PORT_CS_DEV_RST) { - if (ata_port_offline(ap)) + if (ata_link_offline(&ap->link)) return 0; reason = "link not ready"; goto err; diff --git a/include/linux/libata.h b/include/linux/libata.h index 62fa8cf677..e7882ba63e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -696,16 +696,16 @@ static inline int ata_port_is_dummy(struct ata_port *ap) return ap->ops == &ata_dummy_port_ops; } -extern void sata_print_link_status(struct ata_port *ap); +extern void sata_print_link_status(struct ata_link *link); extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); extern void sata_phy_reset(struct ata_port *ap); extern void ata_bus_reset(struct ata_port *ap); -extern int sata_set_spd(struct ata_port *ap); -extern int sata_phy_debounce(struct ata_port *ap, const unsigned long *param, - unsigned long deadline); -extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param, - unsigned long deadline); +extern int sata_set_spd(struct ata_link *link); +extern int sata_link_debounce(struct ata_link *link, + const unsigned long *params, unsigned long deadline); +extern int sata_link_resume(struct ata_link *link, const unsigned long *params, + unsigned long deadline); extern int ata_std_prereset(struct ata_port *ap, unsigned long deadline); extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes, unsigned long deadline); @@ -753,12 +753,12 @@ extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *); extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), struct ata_port *ap); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); -extern int sata_scr_valid(struct ata_port *ap); -extern int sata_scr_read(struct ata_port *ap, int reg, u32 *val); -extern int sata_scr_write(struct ata_port *ap, int reg, u32 val); -extern int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val); -extern int ata_port_online(struct ata_port *ap); -extern int ata_port_offline(struct ata_port *ap); +extern int sata_scr_valid(struct ata_link *link); +extern int sata_scr_read(struct ata_link *link, int reg, u32 *val); +extern int sata_scr_write(struct ata_link *link, int reg, u32 val); +extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val); +extern int ata_link_online(struct ata_link *link); +extern int ata_link_offline(struct ata_link *link); #ifdef CONFIG_PM extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg); extern void ata_host_resume(struct ata_host *host);