From: Tejun Heo <htejun@gmail.com>
Date: Thu, 21 Feb 2008 04:25:50 +0000 (+0900)
Subject: libata: automatically use DMADIR if drive/bridge requires it
X-Git-Tag: v2.6.25-rc3~8^2~4
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=9116300634c5c76cfcd0d2af689846e04d172256;p=linux-2.6

libata: automatically use DMADIR if drive/bridge requires it

Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir.

That's nice, but most SATA devices which need it will tell us about it
in their IDENTIFY PACKET response, as bit-15 of word-62 of the
returned data (as per ATA7, ATA8 specifications).

So for those which specify it, we should automatically use the DMADIR bit.
Otherwise, disc writing will fail by default on many SATA-ATAPI drives.

This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it
if atapi_dmadir is set or identify data indicates DMADIR is necessary.
atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting
DMADIR.

Original patch is from Mark Lord.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9812bbf05e..1845119cc7 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2396,6 +2396,7 @@ int ata_dev_configure(struct ata_device *dev)
 	else if (dev->class == ATA_DEV_ATAPI) {
 		const char *cdb_intr_string = "";
 		const char *atapi_an_string = "";
+		const char *dma_dir_string = "";
 		u32 sntf;
 
 		rc = atapi_cdb_len(id);
@@ -2436,13 +2437,19 @@ int ata_dev_configure(struct ata_device *dev)
 			cdb_intr_string = ", CDB intr";
 		}
 
+		if (atapi_dmadir || atapi_id_dmadir(dev->id)) {
+			dev->flags |= ATA_DFLAG_DMADIR;
+			dma_dir_string = ", DMADIR";
+		}
+
 		/* print device info to dmesg */
 		if (ata_msg_drv(ap) && print_info)
 			ata_dev_printk(dev, KERN_INFO,
-				       "ATAPI: %s, %s, max %s%s%s\n",
+				       "ATAPI: %s, %s, max %s%s%s%s\n",
 				       modelbuf, fwrevbuf,
 				       ata_mode_string(xfer_mask),
-				       cdb_intr_string, atapi_an_string);
+				       cdb_intr_string, atapi_an_string,
+				       dma_dir_string);
 	}
 
 	/* determine max_sectors */
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index f888babc82..0562b0a49f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2582,7 +2582,8 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
 		qc->tf.protocol = ATAPI_PROT_DMA;
 		qc->tf.feature |= ATAPI_PKT_DMA;
 
-		if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE))
+		if ((dev->flags & ATA_DFLAG_DMADIR) &&
+		    (scmd->sc_data_direction != DMA_TO_DEVICE))
 			/* some SATA bridges need us to indicate data xfer direction */
 			qc->tf.feature |= ATAPI_DMADIR;
 	}
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 78bbacaed8..1c622e2b05 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -659,6 +659,11 @@ static inline int atapi_command_packet_set(const u16 *dev_id)
 	return (dev_id[0] >> 8) & 0x1f;
 }
 
+static inline int atapi_id_dmadir(const u16 *dev_id)
+{
+	return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000);
+}
+
 static inline int is_multi_taskfile(struct ata_taskfile *tf)
 {
 	return (tf->command == ATA_CMD_READ_MULTI) ||
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ce7603a731..a05f600136 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -138,6 +138,7 @@ enum {
 	ATA_DFLAG_AN		= (1 << 7), /* AN configured */
 	ATA_DFLAG_HIPM		= (1 << 8), /* device supports HIPM */
 	ATA_DFLAG_DIPM		= (1 << 9), /* device supports DIPM */
+	ATA_DFLAG_DMADIR	= (1 << 10), /* device requires DMADIR */
 	ATA_DFLAG_CFG_MASK	= (1 << 12) - 1,
 
 	ATA_DFLAG_PIO		= (1 << 12), /* device limited to PIO mode */