From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 16 Jul 2008 18:33:46 +0000 (+0200)
Subject: ide-cd: move request prep from cdrom_start_rw_cont to rq issue path
X-Git-Tag: v2.6.27-rc1~1049^2~13
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=90eb808e0fd3cbda8a8b085238930c533f603642;p=linux-2.6

ide-cd: move request prep from cdrom_start_rw_cont to rq issue path

... by factoring out the rq preparation code into a separate
function called in the request routine.  As a nice side effect,
this minimizes the IRQ handler execution time.

There should be no functionality change resulting from this patch.

[bart: s/HWGROUP()/drive->hwif->hwgroup/ and remove extra newline]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 275d5ba120..9e593cebc0 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -666,16 +666,9 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
 
 static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
 
-/*
- * Routine to send a read/write packet command to the drive. This is usually
- * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
- * devices, it is called from an interrupt when the drive is ready to accept
- * the command.
- */
-static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
+static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
+						 struct request *rq)
 {
-	struct request *rq = HWGROUP(drive)->rq;
-
 	if (rq_data_dir(rq) == READ) {
 		unsigned short sectors_per_frame =
 			queue_hardsect_size(drive->queue) >> SECTOR_BITS;
@@ -712,6 +705,19 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
 	/* set up the command */
 	rq->timeout = ATAPI_WAIT_PC;
 
+	return ide_started;
+}
+
+/*
+ * Routine to send a read/write packet command to the drive. This is usually
+ * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
+ * devices, it is called from an interrupt when the drive is ready to accept
+ * the command.
+ */
+static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
+{
+	struct request *rq = drive->hwif->hwgroup->rq;
+
 	/* send the command to the drive and return */
 	return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
 }
@@ -1224,8 +1230,12 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		} else {
 			xferlen = 32768;
 			fn = cdrom_start_rw_cont;
+
 			if (cdrom_start_rw(drive, rq) == ide_stopped)
 				return ide_stopped;
+
+			if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped)
+				return ide_stopped;
 		}
 		info->last_block = block;
 	} else if (blk_sense_request(rq) || blk_pc_request(rq) ||