From: Tomas Winkler Date: Thu, 29 May 2008 08:34:56 +0000 (+0800) Subject: iwlwifi: setup correctly L1 L0S pi link values X-Git-Tag: v2.6.27-rc1~969^2~337^2~41 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8f0618914e02c62c5cf2482f8acc7eb8e9afb816;p=linux-2.6 iwlwifi: setup correctly L1 L0S pi link values This patch setups L1 L0S pci link values. Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h index ee55b28322..fc118335b6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h @@ -100,9 +100,14 @@ #include "iwl-commands.h" -#define PCI_LINK_CTRL 0x0F0 +/* PCI registers */ +#define PCI_LINK_CTRL 0x0F0 /* 1 byte */ #define PCI_POWER_SOURCE 0x0C8 #define PCI_REG_WUM8 0x0E8 + +/* PCI register values */ +#define PCI_LINK_VAL_L0S_EN 0x01 +#define PCI_LINK_VAL_L1_EN 0x02 #define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT (0x80000000) #define TFD_QUEUE_SIZE_MAX (256) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index d548bda1ff..bf0bd4af10 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -496,6 +496,10 @@ static int iwl4965_apm_init(struct iwl_priv *priv) iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */ + iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); + /* set "initialization complete" bit to move adapter * D0U* --> D0A* state */ iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); @@ -514,11 +518,12 @@ static int iwl4965_apm_init(struct iwl_priv *priv) goto out; /* enable DMA */ - iwl_write_prph(priv, APMG_CLK_CTRL_REG, - APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT); + iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT | + APMG_CLK_VAL_BSM_CLK_RQT); udelay(20); + /* disable L1-Active */ iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, APMG_PCIDEV_STT_VAL_L1_ACT_DIS); @@ -546,8 +551,13 @@ static void iwl4965_nic_config(struct iwl_priv *priv) pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link); - /* disable L1 entry -- workaround for pre-B1 */ - pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02); + /* L1 is enabled by BIOS */ + if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN) + /* diable L0S disabled L1A enabled */ + iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); + else + /* L0S enabled L1A disabled */ + iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 0355ccd2d2..b1c50453a7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -63,6 +63,10 @@ static int iwl5000_apm_init(struct iwl_priv *priv) iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */ + iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); + iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL); /* set "initialization complete" bit to move adapter @@ -83,13 +87,13 @@ static int iwl5000_apm_init(struct iwl_priv *priv) return ret; /* enable DMA */ - iwl_write_prph(priv, APMG_CLK_EN_REG, - APMG_CLK_VAL_DMA_CLK_RQT); + iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT); udelay(20); + /* disable L1-Active */ iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, - APMG_PCIDEV_STT_VAL_L1_ACT_DIS); + APMG_PCIDEV_STT_VAL_L1_ACT_DIS); iwl_release_nic_access(priv); @@ -106,8 +110,13 @@ static void iwl5000_nic_config(struct iwl_priv *priv) pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link); - /* disable L1 entry -- workaround for pre-B1 */ - pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02); + /* L1 is enabled by BIOS */ + if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN) + /* diable L0S disabled L1A enabled */ + iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); + else + /* L0S enabled L1A disabled */ + iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 9d6e5d2072..545ed692d8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -87,13 +87,14 @@ /* EEPROM reads */ #define CSR_EEPROM_REG (CSR_BASE+0x02c) #define CSR_EEPROM_GP (CSR_BASE+0x030) +#define CSR_GIO_REG (CSR_BASE+0x03C) #define CSR_GP_UCODE (CSR_BASE+0x044) #define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054) #define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058) #define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c) #define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060) -#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100) #define CSR_LED_REG (CSR_BASE+0x094) +#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100) /* Analog phase-lock-loop configuration */ #define CSR_ANA_PLL_CFG (CSR_BASE+0x20c) @@ -213,6 +214,9 @@ #define CSR_EEPROM_GP_BAD_SIGNATURE (0x00000000) #define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180) +/* CSR GIO */ +#define CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002) + /* UCODE DRV GP */ #define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001) #define CSR_UCODE_SW_BIT_RFKILL (0x00000002)