From: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Date: Wed, 22 Aug 2007 21:02:03 +0000 (-0700)
Subject: au1100fb: move au1100fb_fb_blank() beforce au1100fb_setmode()
X-Git-Tag: v2.6.23-rc4~37
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8e92f21ba3ea3f54e4be062b87ef9fc4af2d33e2;p=linux-2.6

au1100fb: move au1100fb_fb_blank() beforce au1100fb_setmode()

au1100fb_fb_blank() should come before au1100fb_setmode().

drivers/video/au1100fb.c: In function 'au1100fb_setmode':
drivers/video/au1100fb.c:211: error: implicit declaration of function 'au1100fb_fb_blank'

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---

diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 80a81eccad..832e461367 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -115,6 +115,52 @@ static int nocursor = 0;
 module_param(nocursor, int, 0644);
 MODULE_PARM_DESC(nocursor, "cursor enable/disable");
 
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
+{
+	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+	print_dbg("fb_blank %d %p", blank_mode, fbi);
+
+	switch (blank_mode) {
+
+	case VESA_NO_BLANKING:
+			/* Turn on panel */
+			fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+			if (drv_info.panel_idx == 1) {
+				au_writew(au_readw(PB1100_G_CONTROL)
+					  | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+			PB1100_G_CONTROL);
+			}
+#endif
+		au_sync();
+		break;
+
+	case VESA_VSYNC_SUSPEND:
+	case VESA_HSYNC_SUSPEND:
+	case VESA_POWERDOWN:
+			/* Turn off panel */
+			fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+			if (drv_info.panel_idx == 1) {
+				au_writew(au_readw(PB1100_G_CONTROL)
+				  	  & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+			PB1100_G_CONTROL);
+			}
+#endif
+		au_sync();
+		break;
+	default:
+		break;
+
+	}
+	return 0;
+}
+
 /*
  * Set hardware with var settings. This will enable the controller with a specific
  * mode, normally validated with the fb_check_var method
@@ -272,52 +318,6 @@ int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned
 	return 0;
 }
 
-/* fb_blank
- * Blank the screen. Depending on the mode, the screen will be
- * activated with the backlight color, or desactivated
- */
-int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
-{
-	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
-
-	print_dbg("fb_blank %d %p", blank_mode, fbi);
-
-	switch (blank_mode) {
-
-	case VESA_NO_BLANKING:
-			/* Turn on panel */
-			fbdev->regs->lcd_control |= LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
-			if (drv_info.panel_idx == 1) {
-				au_writew(au_readw(PB1100_G_CONTROL)
-					  | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
-			PB1100_G_CONTROL);
-			}
-#endif
-		au_sync();
-		break;
-
-	case VESA_VSYNC_SUSPEND:
-	case VESA_HSYNC_SUSPEND:
-	case VESA_POWERDOWN:
-			/* Turn off panel */
-			fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
-			if (drv_info.panel_idx == 1) {
-				au_writew(au_readw(PB1100_G_CONTROL)
-				  	  & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
-			PB1100_G_CONTROL);
-			}
-#endif
-		au_sync();
-		break;
-	default:
-		break;
-
-	}
-	return 0;
-}
-
 /* fb_pan_display
  * Pan display in x and/or y as specified
  */