From: Marian Balakowicz Date: Fri, 9 Nov 2007 17:12:31 +0000 (+1100) Subject: [POWERPC] mpc5200: add CM5200 DTS X-Git-Tag: v2.6.25-rc1~1131^2~107 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8bd3b7093e0f134cc252167ace9ff395e5e726f5;p=linux-2.6 [POWERPC] mpc5200: add CM5200 DTS Add device tree source file for CM5200 board. Signed-off-by: Marian Balakowicz Signed-off-by: Grant Likely --- diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts new file mode 100644 index 0000000000..9295083d1c --- /dev/null +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -0,0 +1,236 @@ +/* + * CM5200 board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/* + * WARNING: Do not depend on this tree layout remaining static just yet. + * The MPC5200 device tree conventions are still in flux + * Keep an eye on the linuxppc-dev mailing list for more details + */ + +/ { + model = "schindler,cm5200"; + compatible = "schindler,cm5200"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; + i-cache-line-size = <20>; + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 04000000>; // 64MB + }; + + soc5200@f0000000 { + model = "fsl,mpc5200b"; + compatible = "fsl,mpc5200b"; + revision = ""; // from bootloader + device_type = "soc"; + ranges = <0 f0000000 0000c000>; + reg = ; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "mpc5200b-cdm","mpc5200-cdm"; + reg = <200 38>; + }; + + mpc5200_pic: pic@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "mpc5200b-pic","mpc5200-pic"; + reg = <500 80>; + }; + + gpt@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <600 10>; + interrupts = <1 9 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,has-wdt; + }; + + gpt@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <610 10>; + interrupts = <1 a 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpt@620 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <620 10>; + interrupts = <1 b 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpt@630 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <630 10>; + interrupts = <1 c 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpt@640 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <640 10>; + interrupts = <1 d 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpt@650 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <650 10>; + interrupts = <1 e 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpt@660 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <660 10>; + interrupts = <1 f 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpt@670 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <670 10>; + interrupts = <1 10 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + rtc@800 { // Real time clock + compatible = "mpc5200b-rtc","mpc5200-rtc"; + reg = <800 100>; + interrupts = <1 5 0 1 6 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpio@b00 { + compatible = "mpc5200b-gpio","mpc5200-gpio"; + reg = ; + interrupts = <1 7 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpio-wkup@c00 { + compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup"; + reg = ; + interrupts = <1 8 0 0 3 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + spi@f00 { + compatible = "mpc5200b-spi","mpc5200-spi"; + reg = ; + interrupts = <2 d 0 2 e 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + usb@1000 { + device_type = "usb-ohci-be"; + compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be"; + reg = <1000 ff>; + interrupts = <2 6 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + dma-controller@1200 { + compatible = "mpc5200b-bestcomm","mpc5200-bestcomm"; + reg = <1200 80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 a 0 3 b 0 + 3 c 0 3 d 0 3 e 0 3 f 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + xlb@1f00 { + compatible = "mpc5200b-xlb","mpc5200-xlb"; + reg = <1f00 100>; + }; + + serial@2000 { // PSC1 + device_type = "serial"; + compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; + port-number = <0>; // Logical port assignment + reg = <2000 100>; + interrupts = <2 1 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + serial@2200 { // PSC2 + device_type = "serial"; + compatible = "mpc5200-psc-uart"; + port-number = <1>; // Logical port assignment + reg = <2200 100>; + interrupts = <2 2 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + serial@2400 { // PSC3 + device_type = "serial"; + compatible = "mpc5200-psc-uart"; + port-number = <2>; // Logical port assignment + reg = <2400 100>; + interrupts = <2 3 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + serial@2c00 { // PSC6 + device_type = "serial"; + compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; + port-number = <5>; // Logical port assignment + reg = <2c00 100>; + interrupts = <2 4 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + ethernet@3000 { + device_type = "network"; + compatible = "mpc5200b-fec","mpc5200-fec"; + reg = <3000 800>; + local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */ + interrupts = <2 5 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + i2c@3d40 { + compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; + reg = <3d40 40>; + interrupts = <2 10 0>; + interrupt-parent = <&mpc5200_pic>; + fsl5200-clocking; + }; + + sram@8000 { + compatible = "mpc5200b-sram","mpc5200-sram"; + reg = <8000 4000>; + }; + }; +};