From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 18:33:38 +0000 (+0200) Subject: ide-pmac: convert to use ide_timing_find_mode() X-Git-Tag: v2.6.27-rc1~1049^2~55 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8a97206e31dc2e2f8f9b4d97e234b5c701fe9894;p=linux-2.6 ide-pmac: convert to use ide_timing_find_mode() Also update my Copyrights while at it. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 5b91d23269..cfa103a51b 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -5,7 +5,7 @@ * for doing DMA. * * Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -493,6 +493,7 @@ static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port) static void pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) { + struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); u32 *timings, t; unsigned accessTicks, recTicks; unsigned accessTime, recTime; @@ -524,10 +525,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) } case controller_kl_ata4: /* 66Mhz cell */ - recTime = cycle_time - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + recTime = cycle_time - tim->active - tim->setup; recTime = max(recTime, 150U); - accessTime = ide_pio_timings[pio].active_time; + accessTime = tim->active; accessTime = max(accessTime, 150U); accessTicks = SYSCLK_TICKS_66(accessTime); accessTicks = min(accessTicks, 0x1fU); @@ -540,10 +540,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) default: { /* 33Mhz cell */ int ebit = 0; - recTime = cycle_time - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + recTime = cycle_time - tim->active - tim->setup; recTime = max(recTime, 150U); - accessTime = ide_pio_timings[pio].active_time; + accessTime = tim->active; accessTime = max(accessTime, 150U); accessTicks = SYSCLK_TICKS(accessTime); accessTicks = min(accessTicks, 0x1fU);