From: Fredrik Thulin <fredrik@yubico.com>
Date: Thu, 15 Dec 2011 13:58:31 +0000 (+0100)
Subject: Document oath-imf, serial-{btn,usb,api}-visible.
X-Git-Tag: v1.6.3~3
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=89d6af220e7fd7d680459b39aff9940c698028c6;p=yubikey-personalization.old

Document oath-imf, serial-{btn,usb,api}-visible.
---

diff --git a/ykpersonalize.1 b/ykpersonalize.1
index 2090279..1756c0a 100644
--- a/ykpersonalize.1
+++ b/ykpersonalize.1
@@ -99,6 +99,10 @@ the AES key.
 \fBaccess\fR=\fIfffffffffff\fR
 New hex access code to set. Must be 12 characters long.
 If an access code is set, it will be required for subsequent reprogramming of the Yubikey.
+.TP
+\fBoath-imf\fR=\fIxxx\fR
+Set OATH Initial Moving Factor. This is the initial counter value for the YubiKey.
+This should be a value between 0 and 1048560, evenly dividable by 16.
 .TP 
 [\-]\fIticket-flag\fR
 Set/clear ticket flag, see the section `Ticket flags\&'
@@ -229,6 +233,15 @@ of the challenge is used as end of input marker (backtracking from end of payloa
 [\-]\fBchal-btn-trig\fR
 The Yubikey will wait for the user to press the key (within 15 seconds) before
 answering the challenge.
+.TP
+[\-]\fBserial-btn-visible\fR
+The Yubikey will emit it's serial number if the button is pressed during power-up.
+.TP
+[\-]\fBserial-usb-visible\fR
+The Yubikey will indicate it's serial number in the USB iSerial field.
+.TP
+[\-]\fBserial-api-visible\fR
+The Yubikey will allow it's serial number to be read using an API call.
 
 .SH OATH-HOTP Mode
 When using OATH-HOTP mode, a HMAC key of 160 bits (20 bytes, 40 chars of hex)