From: Mike Miller Date: Thu, 21 Feb 2008 07:54:03 +0000 (+0100) Subject: resubmit: cciss: procfs updates to display info about many X-Git-Tag: v2.6.25-rc4~98^2~14 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=89b6e743788516491846724d7ef89bcac7ac9c99;p=linux-2.6 resubmit: cciss: procfs updates to display info about many volumes This patch allows us to display information about all of the logical volumes configured on a particular controller without stepping on memory even when there are many volumes (128 or more) configured. Please consider this for inclusion. Signed-off-by: Mike Miller Signed-off-by: Jens Axboe --- diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 9715be3f24..f1e7390683 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -174,8 +175,6 @@ static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size, static void fail_all_cmds(unsigned long ctlr); #ifdef CONFIG_PROC_FS -static int cciss_proc_get_info(char *buffer, char **start, off_t offset, - int length, int *eof, void *data); static void cciss_procinit(int i); #else static void cciss_procinit(int i) @@ -240,24 +239,46 @@ static inline CommandList_struct *removeQ(CommandList_struct **Qptr, */ #define ENG_GIG 1000000000 #define ENG_GIG_FACTOR (ENG_GIG/512) +#define ENGAGE_SCSI "engage scsi" static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", "UNKNOWN" }; static struct proc_dir_entry *proc_cciss; -static int cciss_proc_get_info(char *buffer, char **start, off_t offset, - int length, int *eof, void *data) +static void cciss_seq_show_header(struct seq_file *seq) { - off_t pos = 0; - off_t len = 0; - int size, i, ctlr; - ctlr_info_t *h = (ctlr_info_t *) data; - drive_info_struct *drv; - unsigned long flags; - sector_t vol_sz, vol_sz_frac; + ctlr_info_t *h = seq->private; + + seq_printf(seq, "%s: HP %s Controller\n" + "Board ID: 0x%08lx\n" + "Firmware Version: %c%c%c%c\n" + "IRQ: %d\n" + "Logical drives: %d\n" + "Current Q depth: %d\n" + "Current # commands on controller: %d\n" + "Max Q depth since init: %d\n" + "Max # commands on controller since init: %d\n" + "Max SG entries since init: %d\n", + h->devname, + h->product_name, + (unsigned long)h->board_id, + h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], + h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT], + h->num_luns, + h->Qdepth, h->commands_outstanding, + h->maxQsinceinit, h->max_outstanding, h->maxSG); - ctlr = h->ctlr; +#ifdef CONFIG_CISS_SCSI_TAPE + cciss_seq_tape_report(seq, h->ctlr); +#endif /* CONFIG_CISS_SCSI_TAPE */ +} + +static void *cciss_seq_start(struct seq_file *seq, loff_t *pos) +{ + ctlr_info_t *h = seq->private; + unsigned ctlr = h->ctlr; + unsigned long flags; /* prevent displaying bogus info during configuration * or deconfiguration of a logical volume @@ -265,115 +286,155 @@ static int cciss_proc_get_info(char *buffer, char **start, off_t offset, spin_lock_irqsave(CCISS_LOCK(ctlr), flags); if (h->busy_configuring) { spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - return -EBUSY; + return ERR_PTR(-EBUSY); } h->busy_configuring = 1; spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - size = sprintf(buffer, "%s: HP %s Controller\n" - "Board ID: 0x%08lx\n" - "Firmware Version: %c%c%c%c\n" - "IRQ: %d\n" - "Logical drives: %d\n" - "Max sectors: %d\n" - "Current Q depth: %d\n" - "Current # commands on controller: %d\n" - "Max Q depth since init: %d\n" - "Max # commands on controller since init: %d\n" - "Max SG entries since init: %d\n\n", - h->devname, - h->product_name, - (unsigned long)h->board_id, - h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], - h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT], - h->num_luns, - h->cciss_max_sectors, - h->Qdepth, h->commands_outstanding, - h->maxQsinceinit, h->max_outstanding, h->maxSG); - - pos += size; - len += size; - cciss_proc_tape_report(ctlr, buffer, &pos, &len); - for (i = 0; i <= h->highest_lun; i++) { - - drv = &h->drv[i]; - if (drv->heads == 0) - continue; + if (*pos == 0) + cciss_seq_show_header(seq); - vol_sz = drv->nr_blocks; - vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR); - vol_sz_frac *= 100; - sector_div(vol_sz_frac, ENG_GIG_FACTOR); + return pos; +} + +static int cciss_seq_show(struct seq_file *seq, void *v) +{ + sector_t vol_sz, vol_sz_frac; + ctlr_info_t *h = seq->private; + unsigned ctlr = h->ctlr; + loff_t *pos = v; + drive_info_struct *drv = &h->drv[*pos]; + + if (*pos > h->highest_lun) + return 0; + + if (drv->heads == 0) + return 0; + + vol_sz = drv->nr_blocks; + vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR); + vol_sz_frac *= 100; + sector_div(vol_sz_frac, ENG_GIG_FACTOR); + + if (drv->raid_level > 5) + drv->raid_level = RAID_UNKNOWN; + seq_printf(seq, "cciss/c%dd%d:" + "\t%4u.%02uGB\tRAID %s\n", + ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac, + raid_label[drv->raid_level]); + return 0; +} + +static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + ctlr_info_t *h = seq->private; + + if (*pos > h->highest_lun) + return NULL; + *pos += 1; + + return pos; +} + +static void cciss_seq_stop(struct seq_file *seq, void *v) +{ + ctlr_info_t *h = seq->private; + + /* Only reset h->busy_configuring if we succeeded in setting + * it during cciss_seq_start. */ + if (v == ERR_PTR(-EBUSY)) + return; - if (drv->raid_level > 5) - drv->raid_level = RAID_UNKNOWN; - size = sprintf(buffer + len, "cciss/c%dd%d:" - "\t%4u.%02uGB\tRAID %s\n", - ctlr, i, (int)vol_sz, (int)vol_sz_frac, - raid_label[drv->raid_level]); - pos += size; - len += size; - } - - *eof = 1; - *start = buffer + offset; - len -= offset; - if (len > length) - len = length; h->busy_configuring = 0; - return len; } -static int -cciss_proc_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static struct seq_operations cciss_seq_ops = { + .start = cciss_seq_start, + .show = cciss_seq_show, + .next = cciss_seq_next, + .stop = cciss_seq_stop, +}; + +static int cciss_seq_open(struct inode *inode, struct file *file) { - unsigned char cmd[80]; - int len; -#ifdef CONFIG_CISS_SCSI_TAPE - ctlr_info_t *h = (ctlr_info_t *) data; - int rc; + int ret = seq_open(file, &cciss_seq_ops); + struct seq_file *seq = file->private_data; + + if (!ret) + seq->private = PDE(inode)->data; + + return ret; +} + +static ssize_t +cciss_proc_write(struct file *file, const char __user *buf, + size_t length, loff_t *ppos) +{ + int err; + char *buffer; + +#ifndef CONFIG_CISS_SCSI_TAPE + return -EINVAL; #endif - if (count > sizeof(cmd) - 1) + if (!buf || length > PAGE_SIZE - 1) return -EINVAL; - if (copy_from_user(cmd, buffer, count)) - return -EFAULT; - cmd[count] = '\0'; - len = strlen(cmd); // above 3 lines ensure safety - if (len && cmd[len - 1] == '\n') - cmd[--len] = '\0'; -# ifdef CONFIG_CISS_SCSI_TAPE - if (strcmp("engage scsi", cmd) == 0) { + + buffer = (char *)__get_free_page(GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + err = -EFAULT; + if (copy_from_user(buffer, buf, length)) + goto out; + buffer[length] = '\0'; + +#ifdef CONFIG_CISS_SCSI_TAPE + if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) { + struct seq_file *seq = file->private_data; + ctlr_info_t *h = seq->private; + int rc; + rc = cciss_engage_scsi(h->ctlr); if (rc != 0) - return -rc; - return count; - } + err = -rc; + else + err = length; + } else +#endif /* CONFIG_CISS_SCSI_TAPE */ + err = -EINVAL; /* might be nice to have "disengage" too, but it's not safely possible. (only 1 module use count, lock issues.) */ -# endif - return -EINVAL; + +out: + free_page((unsigned long)buffer); + return err; } -/* - * Get us a file in /proc/cciss that says something about each controller. - * Create /proc/cciss if it doesn't exist yet. - */ +static struct file_operations cciss_proc_fops = { + .owner = THIS_MODULE, + .open = cciss_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, + .write = cciss_proc_write, +}; + static void __devinit cciss_procinit(int i) { struct proc_dir_entry *pde; - if (proc_cciss == NULL) { + if (proc_cciss == NULL) proc_cciss = proc_mkdir("cciss", proc_root_driver); - if (!proc_cciss) - return; - } + if (!proc_cciss) + return; + pde = proc_create(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP | + S_IROTH, proc_cciss, + &cciss_proc_fops); + if (!pde) + return; - pde = create_proc_read_entry(hba[i]->devname, - S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH, - proc_cciss, cciss_proc_get_info, hba[i]); - pde->write_proc = cciss_proc_write; + pde->data = hba[i]; } #endif /* CONFIG_PROC_FS */ diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 55178e9973..45ac09300e 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -1404,21 +1404,18 @@ cciss_engage_scsi(int ctlr) } static void -cciss_proc_tape_report(int ctlr, unsigned char *buffer, off_t *pos, off_t *len) +cciss_seq_tape_report(struct seq_file *seq, int ctlr) { unsigned long flags; - int size; - - *pos = *pos -1; *len = *len - 1; // cut off the last trailing newline CPQ_TAPE_LOCK(ctlr, flags); - size = sprintf(buffer + *len, + seq_printf(seq, "Sequential access devices: %d\n\n", ccissscsi[ctlr].ndevices); CPQ_TAPE_UNLOCK(ctlr, flags); - *pos += size; *len += size; } + /* Need at least one of these error handlers to keep ../scsi/hosts.c from * complaining. Doing a host- or bus-reset can't do anything good here. * Despite what it might say in scsi_error.c, there may well be commands @@ -1498,6 +1495,5 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) #define cciss_scsi_setup(cntl_num) #define cciss_unregister_scsi(ctlr) #define cciss_register_scsi(ctlr) -#define cciss_proc_tape_report(ctlr, buffer, pos, len) #endif /* CONFIG_CISS_SCSI_TAPE */