From: Ivo van Doorn Date: Sun, 9 Mar 2008 21:49:04 +0000 (+0100) Subject: rt2x00: Fix rt2400pci signal X-Git-Tag: v2.6.26-rc1~1138^2~426 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=89993890aeb8fe58b2d49b2661965524802ab73c;p=linux-2.6 rt2x00: Fix rt2400pci signal After sampling hundreds of RX frame descriptors, the results were conclusive: - The Ralink documentation regarding the SIGNAL and RSSI are wrong. It turns out that of the 5 BBR registers, we should not use BBR0 and BBR1 for SIGNAL and RSSI respectively, but actually BBR1 and BBR2. BBR0 does show values, but the exact meaning remains unclear, but they cannot be translated into a SIGNAL or RSSI field. BBR3, BBR4 and BBR5 are always 0, so their meaning is unknown. As it turns out, the reported SIGNAL is the PLCP value, this in contradiction to what was expected looking at rt2500pci which only reported the PLCP values for OFDM rates and bitrate values for CCK rates. This means we should let the driver raise the flag about the contents of the SIGNAL field so rt2x00lib can always do the right thing based on what the driver reports. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index a92626bc53..4cd284209d 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1058,9 +1058,11 @@ static void rt2400pci_fill_rxdone(struct queue_entry *entry, struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; u32 word0; u32 word2; + u32 word3; rt2x00_desc_read(priv_rx->desc, 0, &word0); rt2x00_desc_read(priv_rx->desc, 2, &word2); + rt2x00_desc_read(priv_rx->desc, 3, &word3); rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) @@ -1070,9 +1072,11 @@ static void rt2400pci_fill_rxdone(struct queue_entry *entry, /* * Obtain the status about this packet. + * The signal is the PLCP value. */ rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); - rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - + rxdesc->signal_plcp = 1; + rxdesc->rssi = rt2x00_get_field32(word2, RXD_W3_RSSI) - entry->queue->rt2x00dev->rssi_offset; rxdesc->ofdm = 0; rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index da178d4466..a5210f9a33 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -899,13 +899,13 @@ * Word2 */ #define RXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff) -#define RXD_W2_SIGNAL FIELD32(0x00ff0000) -#define RXD_W2_RSSI FIELD32(0xff000000) +#define RXD_W2_BBR0 FIELD32(0x00ff0000) +#define RXD_W2_SIGNAL FIELD32(0xff000000) /* * Word3 */ -#define RXD_W3_BBR2 FIELD32(0x000000ff) +#define RXD_W3_RSSI FIELD32(0x000000ff) #define RXD_W3_BBR3 FIELD32(0x0000ff00) #define RXD_W3_BBR4 FIELD32(0x00ff0000) #define RXD_W3_BBR5 FIELD32(0xff000000) diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 4ae09b4187..0f5139a2f2 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1219,10 +1219,17 @@ static void rt2500pci_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; + /* + * Obtain the status about this packet. + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 100kbit/s. + */ + rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); + rxdesc->signal_plcp = rxdesc->ofdm; rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - entry->queue->rt2x00dev->rssi_offset; - rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); rxdesc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); } diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 8dfebfd695..c8216d7558 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1135,11 +1135,15 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry, /* * Obtain the status about this packet. + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 100kbit/s. */ + rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + rxdesc->signal_plcp = rxdesc->ofdm; rxdesc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) - entry->queue->rt2x00dev->rssi_offset; - rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); rxdesc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index eb2d21c4e8..a885254d2e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -573,6 +573,13 @@ void rt2x00lib_rxdone(struct queue_entry *entry, int idx = -1; u16 fc; + /* + * If the signal is the plcp value, + * we need to strip the preamble bit (0x08). + */ + if (rxdesc->signal_plcp) + rxdesc->signal &= ~0x08; + /* * Update RX statistics. */ @@ -580,13 +587,8 @@ void rt2x00lib_rxdone(struct queue_entry *entry, for (i = 0; i < sband->n_bitrates; i++) { rate = rt2x00_get_rate(sband->bitrates[i].hw_value); - /* - * When frame was received with an OFDM bitrate, - * the signal is the PLCP value. If it was received with - * a CCK bitrate the signal is the rate in 100kbit/s. - */ - if ((rxdesc->ofdm && rate->plcp == rxdesc->signal) || - (!rxdesc->ofdm && rate->bitrate == rxdesc->signal)) { + if ((rxdesc->signal_plcp && rate->plcp == rxdesc->signal) || + (!rxdesc->signal_plcp && rate->bitrate == rxdesc->signal)) { idx = i; break; } diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index fbabf389b6..c5f46f2340 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -134,6 +134,8 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) * Summary of information that has been read from the RX frame descriptor. * * @signal: Signal of the received frame. + * @signal_plcp: Does the signal field contain the plcp value, + * or does it contain the bitrate itself. * @rssi: RSSI of the received frame. * @ofdm: Was frame send with an OFDM rate. * @size: Data size of the received frame. @@ -142,6 +144,7 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) */ struct rxdone_entry_desc { int signal; + int signal_plcp; int rssi; int ofdm; int size; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 914aee0ce8..4baa916b80 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1645,10 +1645,14 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, /* * Obtain the status about this packet. + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 100kbit/s. */ + rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + rxdesc->signal_plcp = rxdesc->ofdm; rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1); - rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); rxdesc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); } diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index fc38c0c5cc..48938819ee 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1405,10 +1405,14 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry, /* * Obtain the status about this packet. + * When frame was received with an OFDM bitrate, + * the signal is the PLCP value. If it was received with + * a CCK bitrate the signal is the rate in 100kbit/s. */ + rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); + rxdesc->signal_plcp = rxdesc->ofdm; rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1); - rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); rxdesc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);