From: Hans Verkuil Date: Sat, 28 Jun 2008 17:57:30 +0000 (-0300) Subject: V4L/DVB (8168a): cx18: Update cx18 documentation. X-Git-Tag: v2.6.27-rc1~966^2~161 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=86d674a1324cce5708b1b84e4ae162910e201b4f;p=linux-2.6 V4L/DVB (8168a): cx18: Update cx18 documentation. Update the documentation, providing an updated list of supported boards. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt index 6842c26289..ecab5a06bd 100644 --- a/Documentation/video4linux/cx18.txt +++ b/Documentation/video4linux/cx18.txt @@ -1,23 +1,23 @@ Some notes regarding the cx18 driver for the Conexant CX23418 MPEG encoder chip: -1) The only hardware currently supported is the Hauppauge HVR-1600 - card and the Compro VideoMate H900 (note that this card only - supports analog input, it has no digital tuner!). +1) Currently supported are: -2) Some people have problems getting the i2c bus to work. Cause unknown. - The symptom is that the eeprom cannot be read and the card is - unusable. + - Hauppauge HVR-1600 + - Compro VideoMate H900 + - Yuan MPC718 + - Conexant Raptor PAL/SECAM devkit -3) The audio from the analog tuner is mono only. Probably caused by - incorrect audio register information in the datasheet. We are - waiting for updated information from Conexant. +2) Some people have problems getting the i2c bus to work. + The symptom is that the eeprom cannot be read and the card is + unusable. This is probably fixed, but if you have problems + then post to the video4linux or ivtv-users mailinglist. -4) VBI (raw or sliced) has not yet been implemented. +3) VBI (raw or sliced) has not yet been implemented. -5) MPEG indexing is not yet implemented. +4) MPEG indexing is not yet implemented. -6) The driver is still a bit rough around the edges, this should +5) The driver is still a bit rough around the edges, this should improve over time.