From: Mark A. Greer Date: Tue, 20 Jun 2006 21:15:36 +0000 (-0700) Subject: [POWERPC] mpic: add support for serial mode interrupts X-Git-Tag: v2.6.18-rc1~1081^2~225^2~7 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=868ea0c9256b658b14603e1ad7361b81b92ccacd;p=linux-2.6 [POWERPC] mpic: add support for serial mode interrupts On Tue, Jun 20, 2006 at 02:01:26PM +1000, Benjamin Herrenschmidt wrote: > On Mon, 2006-06-19 at 13:08 -0700, Mark A. Greer wrote: > > MPC10x-style interrupt controllers have a serial mode that allows > > several interrupts to be clocked in through one INT signal. > > > > This patch adds the software support for that mode. > > You hard code the clock ratio... why not add a separate call to be > called after mpic_init, > something like mpic_set_serial_int(int mpic, int enable, int > clock_ratio) ? How's this? -- MPC10x-style interrupt controllers have a serial mode that allows several interrupts to be clocked in through one INT signal. This patch adds the software support for that mode. Signed-off-by: Mark A. Greer -- arch/powerpc/sysdev/mpic.c | 20 ++++++++++++++++++++ include/asm-powerpc/mpic.h | 10 ++++++++++ 2 files changed, 30 insertions(+) -- Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 7dcdfcb3c9..bffe50d02c 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -829,7 +829,27 @@ void __init mpic_init(struct mpic *mpic) mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0); } +void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio) +{ + u32 v; + + v = mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1); + v &= ~MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK; + v |= MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(clock_ratio); + mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1, v); +} +void __init mpic_set_serial_int(struct mpic *mpic, int enable) +{ + u32 v; + + v = mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1); + if (enable) + v |= MPIC_GREG_GLOBAL_CONF_1_SIE; + else + v &= ~MPIC_GREG_GLOBAL_CONF_1_SIE; + mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1, v); +} void mpic_irq_set_priority(unsigned int irq, unsigned int pri) { diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index 6b9e78142f..f0d22ac34b 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -22,6 +22,10 @@ #define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 #define MPIC_GREG_GCONF_BASE_MASK 0x000fffff #define MPIC_GREG_GLOBAL_CONF_1 0x00030 +#define MPIC_GREG_GLOBAL_CONF_1_SIE 0x08000000 +#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK 0x70000000 +#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r) \ + (((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK) #define MPIC_GREG_VENDOR_0 0x00040 #define MPIC_GREG_VENDOR_1 0x00050 #define MPIC_GREG_VENDOR_2 0x00060 @@ -284,6 +288,12 @@ extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs); /* This one gets to the primary mpic */ extern int mpic_get_irq(struct pt_regs *regs); +/* Set the EPIC clock ratio */ +void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio); + +/* Enable/Disable EPIC serial interrupt mode */ +void mpic_set_serial_int(struct mpic *mpic, int enable); + /* global mpic for pSeries */ extern struct mpic *pSeries_mpic;