From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 16 Oct 2007 20:29:54 +0000 (+0200)
Subject: au1xxx-ide: use ide_tune_dma()
X-Git-Tag: v2.6.24-rc1~822^2~20
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8446f65988b48d19cf419aa4def9a9ccfed17b76;p=linux-2.6

au1xxx-ide: use ide_tune_dma()

* Remove needless setting of drive->using_dma from auide_dma_check().

* Split off auide_mdma_filter() from auide_dma_check().

* Use ide_tune_dma() in auide_dma_check(), this fixes following issues:
  - device's DMA capability bit not being checked
  - device not being checked against generic DMA blacklist
  - transfer mode not being set on device/host

* Add PIO autotune fallback to auide_dma_check().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---

diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 892d08f61d..1c4732958f 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -351,11 +351,18 @@ static int auide_dma_setup(ide_drive_t *drive)
 	return 0;
 }
 
-static int auide_dma_check(ide_drive_t *drive)
+static u8 auide_mdma_filter(ide_drive_t *drive)
 {
-	u8 speed = ide_max_dma_mode(drive);
+	/*
+	 * FIXME: ->white_list and ->black_list are based on completely bogus
+	 * ->ide_dma_check implementation which didn't set neither the host
+	 * controller timings nor the device for the desired transfer mode.
+	 *
+	 * They should be either removed or 0x00 MWDMA mask should be
+	 * returned for devices on the ->black_list.
+	 */
 
-	if( dbdma_init_done == 0 ){
+	if (dbdma_init_done == 0) {
 		auide_hwif.white_list = ide_in_drive_list(drive->id,
 							  dma_white_list);
 		auide_hwif.black_list = ide_in_drive_list(drive->id,
@@ -366,21 +373,20 @@ static int auide_dma_check(ide_drive_t *drive)
 	}
 
 	/* Is the drive in our DMA black list? */
-
-	if ( auide_hwif.black_list ) {
-		drive->using_dma = 0;
-
-		/* Borrowed the warning message from ide-dma.c */
-
+	if (auide_hwif.black_list)
 		printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n",
-		       drive->name, drive->id->model);	       
-	}
-	else
-		drive->using_dma = 1;
+				    drive->name, drive->id->model);
 
-	if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
+	return drive->hwif->mwdma_mask;
+}
+
+static int auide_dma_check(ide_drive_t *drive)
+{
+	if (ide_tune_dma(drive))
 		return 0;
 
+	ide_set_max_pio(drive);
+
 	return -1;
 }
 
@@ -692,6 +698,8 @@ static int au_ide_probe(struct device *dev)
 	hwif->dma_off_quietly		= &auide_dma_off_quietly;
 	hwif->dma_timeout		= &auide_dma_timeout;
 
+	hwif->mdma_filter		= &auide_mdma_filter;
+
 	hwif->ide_dma_check             = &auide_dma_check;
 	hwif->dma_exec_cmd              = &auide_dma_exec_cmd;
 	hwif->dma_start                 = &auide_dma_start;