From: Paul Mackerras Date: Sat, 22 Oct 2005 06:06:27 +0000 (+1000) Subject: ppc64: Use arch/powerpc/platforms/powermac for powermac build. X-Git-Tag: v2.6.15-rc1~59^2~118 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=834289447542b7ec55c0847486616d4d53ddf891;p=linux-2.6 ppc64: Use arch/powerpc/platforms/powermac for powermac build. This switches the ARCH=ppc64 build to use arch/powerpc/platforms/powermac instead of arch/ppc64/kernel/pmac*, and deletes the latter set of files. Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 9b54e805b8..509622da54 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -1,5 +1,9 @@ ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_PMAC) += powermac/ +else +ifeq ($(CONFIG_PPC64),y) +obj-$(CONFIG_PPC_PMAC) += powermac/ +endif endif obj-$(CONFIG_4xx) += 4xx/ obj-$(CONFIG_85xx) += 85xx/ diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 6c02a79955..424dd250cd 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -56,11 +56,7 @@ obj-$(CONFIG_HVCS) += hvcserver.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o -ifneq ($(CONFIG_PPC_MERGE),y) -obj-$(CONFIG_PPC_PMAC) += pmac_setup.o pmac_feature.o pmac_pci.o \ - pmac_time.o pmac_nvram.o pmac_low_i2c.o \ - udbg_scc.o -endif +obj-$(CONFIG_PPC_PMAC) += udbg_scc.o obj-$(CONFIG_PPC_MAPLE) += maple_setup.o maple_pci.o maple_time.o \ udbg_16550.o @@ -68,9 +64,7 @@ obj-$(CONFIG_PPC_MAPLE) += maple_setup.o maple_pci.o maple_time.o \ obj-$(CONFIG_U3_DART) += u3_iommu.o ifdef CONFIG_SMP -ifneq ($(CONFIG_PPC_MERGE),y) -obj-$(CONFIG_PPC_PMAC) += pmac_smp.o smp-tbsync.o -endif +obj-$(CONFIG_PPC_PMAC) += smp-tbsync.o obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o endif diff --git a/arch/ppc64/kernel/pmac.h b/arch/ppc64/kernel/pmac.h deleted file mode 100644 index fa59f2a5c7..0000000000 --- a/arch/ppc64/kernel/pmac.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __PMAC_H__ -#define __PMAC_H__ - -#include -#include - -/* - * Declaration for the various functions exported by the - * pmac_* files. Mostly for use by pmac_setup - */ - -extern unsigned long pmac_get_boot_time(void); -extern void pmac_get_rtc_time(struct rtc_time *tm); -extern int pmac_set_rtc_time(struct rtc_time *tm); -extern void pmac_read_rtc_time(void); -extern void pmac_calibrate_decr(void); - -extern void pmac_pcibios_fixup(void); -extern void pmac_pci_init(void); -extern void pmac_setup_pci_dma(void); -extern void pmac_check_ht_link(void); - -extern void pmac_setup_smp(void); - -extern unsigned long pmac_ide_get_base(int index); -extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, - unsigned long data_port, unsigned long ctrl_port, int *irq); - -extern void pmac_nvram_init(void); - -#endif /* __PMAC_H__ */ diff --git a/arch/ppc64/kernel/pmac_feature.c b/arch/ppc64/kernel/pmac_feature.c deleted file mode 100644 index 26075f11db..0000000000 --- a/arch/ppc64/kernel/pmac_feature.c +++ /dev/null @@ -1,767 +0,0 @@ -/* - * arch/ppc/platforms/pmac_feature.c - * - * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au) - * Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * TODO: - * - * - Replace mdelay with some schedule loop if possible - * - Shorten some obfuscated delays on some routines (like modem - * power) - * - Refcount some clocks (see darwin) - * - Split split split... - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#undef DEBUG_FEATURE - -#ifdef DEBUG_FEATURE -#define DBG(fmt...) printk(KERN_DEBUG fmt) -#else -#define DBG(fmt...) -#endif - -/* - * We use a single global lock to protect accesses. Each driver has - * to take care of its own locking - */ -static DEFINE_SPINLOCK(feature_lock); - -#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags); -#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags); - - -/* - * Instance of some macio stuffs - */ -struct macio_chip macio_chips[MAX_MACIO_CHIPS] ; - -struct macio_chip* macio_find(struct device_node* child, int type) -{ - while(child) { - int i; - - for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++) - if (child == macio_chips[i].of_node && - (!type || macio_chips[i].type == type)) - return &macio_chips[i]; - child = child->parent; - } - return NULL; -} -EXPORT_SYMBOL_GPL(macio_find); - -static const char* macio_names[] = -{ - "Unknown", - "Grand Central", - "OHare", - "OHareII", - "Heathrow", - "Gatwick", - "Paddington", - "Keylargo", - "Pangea", - "Intrepid", - "K2" -}; - - - -/* - * Uninorth reg. access. Note that Uni-N regs are big endian - */ - -#define UN_REG(r) (uninorth_base + ((r) >> 2)) -#define UN_IN(r) (in_be32(UN_REG(r))) -#define UN_OUT(r,v) (out_be32(UN_REG(r), (v))) -#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v))) -#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v))) - -static struct device_node* uninorth_node; -static u32* uninorth_base; -static u32 uninorth_rev; -static void *u3_ht; - -extern struct device_node *k2_skiplist[2]; - -/* - * For each motherboard family, we have a table of functions pointers - * that handle the various features. - */ - -typedef long (*feature_call)(struct device_node* node, long param, long value); - -struct feature_table_entry { - unsigned int selector; - feature_call function; -}; - -struct pmac_mb_def -{ - const char* model_string; - const char* model_name; - int model_id; - struct feature_table_entry* features; - unsigned long board_flags; -}; -static struct pmac_mb_def pmac_mb; - -/* - * Here are the chip specific feature functions - */ - - -static long g5_read_gpio(struct device_node* node, long param, long value) -{ - struct macio_chip* macio = &macio_chips[0]; - - return MACIO_IN8(param); -} - - -static long g5_write_gpio(struct device_node* node, long param, long value) -{ - struct macio_chip* macio = &macio_chips[0]; - - MACIO_OUT8(param, (u8)(value & 0xff)); - return 0; -} - -static long g5_gmac_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio = &macio_chips[0]; - unsigned long flags; - - if (node == NULL) - return -ENODEV; - - LOCK(flags); - if (value) { - MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); - mb(); - k2_skiplist[0] = NULL; - } else { - k2_skiplist[0] = node; - mb(); - MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); - } - - UNLOCK(flags); - mdelay(1); - - return 0; -} - -static long g5_fw_enable(struct device_node* node, long param, long value) -{ - struct macio_chip* macio = &macio_chips[0]; - unsigned long flags; - - if (node == NULL) - return -ENODEV; - - LOCK(flags); - if (value) { - MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); - mb(); - k2_skiplist[1] = NULL; - } else { - k2_skiplist[1] = node; - mb(); - MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); - } - - UNLOCK(flags); - mdelay(1); - - return 0; -} - -static long g5_mpic_enable(struct device_node* node, long param, long value) -{ - unsigned long flags; - - if (node->parent == NULL || strcmp(node->parent->name, "u3")) - return 0; - - LOCK(flags); - UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE); - UNLOCK(flags); - - return 0; -} - -static long g5_eth_phy_reset(struct device_node* node, long param, long value) -{ - struct macio_chip* macio = &macio_chips[0]; - struct device_node *phy; - int need_reset; - - /* - * We must not reset the combo PHYs, only the BCM5221 found in - * the iMac G5. - */ - phy = of_get_next_child(node, NULL); - if (!phy) - return -ENODEV; - need_reset = device_is_compatible(phy, "B5221"); - of_node_put(phy); - if (!need_reset) - return 0; - - /* PHY reset is GPIO 29, not in device-tree unfortunately */ - MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, - KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); - /* Thankfully, this is now always called at a time when we can - * schedule by sungem. - */ - msleep(10); - MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0); - - return 0; -} - -static long g5_i2s_enable(struct device_node *node, long param, long value) -{ - /* Very crude implementation for now */ - struct macio_chip* macio = &macio_chips[0]; - unsigned long flags; - - if (value == 0) - return 0; /* don't disable yet */ - - LOCK(flags); - MACIO_BIS(KEYLARGO_FCR3, KL3_CLK45_ENABLE | KL3_CLK49_ENABLE | - KL3_I2S0_CLK18_ENABLE); - udelay(10); - MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_I2S0_CELL_ENABLE | - K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE); - udelay(10); - MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_I2S0_RESET); - UNLOCK(flags); - udelay(10); - - return 0; -} - - -#ifdef CONFIG_SMP -static long g5_reset_cpu(struct device_node* node, long param, long value) -{ - unsigned int reset_io = 0; - unsigned long flags; - struct macio_chip* macio; - struct device_node* np; - - macio = &macio_chips[0]; - if (macio->type != macio_keylargo2) - return -ENODEV; - - np = find_path_device("/cpus"); - if (np == NULL) - return -ENODEV; - for (np = np->child; np != NULL; np = np->sibling) { - u32* num = (u32 *)get_property(np, "reg", NULL); - u32* rst = (u32 *)get_property(np, "soft-reset", NULL); - if (num == NULL || rst == NULL) - continue; - if (param == *num) { - reset_io = *rst; - break; - } - } - if (np == NULL || reset_io == 0) - return -ENODEV; - - LOCK(flags); - MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); - (void)MACIO_IN8(reset_io); - udelay(1); - MACIO_OUT8(reset_io, 0); - (void)MACIO_IN8(reset_io); - UNLOCK(flags); - - return 0; -} -#endif /* CONFIG_SMP */ - -/* - * This can be called from pmac_smp so isn't static - * - * This takes the second CPU off the bus on dual CPU machines - * running UP - */ -void g5_phy_disable_cpu1(void) -{ - UN_OUT(U3_API_PHY_CONFIG_1, 0); -} - -static long generic_get_mb_info(struct device_node* node, long param, long value) -{ - switch(param) { - case PMAC_MB_INFO_MODEL: - return pmac_mb.model_id; - case PMAC_MB_INFO_FLAGS: - return pmac_mb.board_flags; - case PMAC_MB_INFO_NAME: - /* hack hack hack... but should work */ - *((const char **)value) = pmac_mb.model_name; - return 0; - } - return -EINVAL; -} - - -/* - * Table definitions - */ - -/* Used on any machine - */ -static struct feature_table_entry any_features[] = { - { PMAC_FTR_GET_MB_INFO, generic_get_mb_info }, - { 0, NULL } -}; - -/* G5 features - */ -static struct feature_table_entry g5_features[] = { - { PMAC_FTR_GMAC_ENABLE, g5_gmac_enable }, - { PMAC_FTR_1394_ENABLE, g5_fw_enable }, - { PMAC_FTR_ENABLE_MPIC, g5_mpic_enable }, - { PMAC_FTR_READ_GPIO, g5_read_gpio }, - { PMAC_FTR_WRITE_GPIO, g5_write_gpio }, - { PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset }, - { PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable }, -#ifdef CONFIG_SMP - { PMAC_FTR_RESET_CPU, g5_reset_cpu }, -#endif /* CONFIG_SMP */ - { 0, NULL } -}; - -static struct pmac_mb_def pmac_mb_defs[] = { - { "PowerMac7,2", "PowerMac G5", - PMAC_TYPE_POWERMAC_G5, g5_features, - 0, - }, - { "PowerMac7,3", "PowerMac G5", - PMAC_TYPE_POWERMAC_G5, g5_features, - 0, - }, - { "PowerMac8,1", "iMac G5", - PMAC_TYPE_IMAC_G5, g5_features, - 0, - }, - { "PowerMac9,1", "PowerMac G5", - PMAC_TYPE_POWERMAC_G5_U3L, g5_features, - 0, - }, - { "RackMac3,1", "XServe G5", - PMAC_TYPE_XSERVE_G5, g5_features, - 0, - }, -}; - -/* - * The toplevel feature_call callback - */ -long pmac_do_feature_call(unsigned int selector, ...) -{ - struct device_node* node; - long param, value; - int i; - feature_call func = NULL; - va_list args; - - if (pmac_mb.features) - for (i=0; pmac_mb.features[i].function; i++) - if (pmac_mb.features[i].selector == selector) { - func = pmac_mb.features[i].function; - break; - } - if (!func) - for (i=0; any_features[i].function; i++) - if (any_features[i].selector == selector) { - func = any_features[i].function; - break; - } - if (!func) - return -ENODEV; - - va_start(args, selector); - node = (struct device_node*)va_arg(args, void*); - param = va_arg(args, long); - value = va_arg(args, long); - va_end(args); - - return func(node, param, value); -} - -static int __init probe_motherboard(void) -{ - int i; - struct macio_chip* macio = &macio_chips[0]; - const char* model = NULL; - struct device_node *dt; - - /* Lookup known motherboard type in device-tree. First try an - * exact match on the "model" property, then try a "compatible" - * match is none is found. - */ - dt = find_devices("device-tree"); - if (dt != NULL) - model = (const char *) get_property(dt, "model", NULL); - for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { - if (strcmp(model, pmac_mb_defs[i].model_string) == 0) { - pmac_mb = pmac_mb_defs[i]; - goto found; - } - } - for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { - if (machine_is_compatible(pmac_mb_defs[i].model_string)) { - pmac_mb = pmac_mb_defs[i]; - goto found; - } - } - - /* Fallback to selection depending on mac-io chip type */ - switch(macio->type) { - case macio_keylargo2: - pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2; - pmac_mb.model_name = "Unknown K2-based"; - pmac_mb.features = g5_features; - - default: - return -ENODEV; - } -found: - /* Check for "mobile" machine */ - if (model && (strncmp(model, "PowerBook", 9) == 0 - || strncmp(model, "iBook", 5) == 0)) - pmac_mb.board_flags |= PMAC_MB_MOBILE; - - - printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name); - return 0; -} - -/* Initialize the Core99 UniNorth host bridge and memory controller - */ -static void __init probe_uninorth(void) -{ - uninorth_node = of_find_node_by_name(NULL, "u3"); - if (uninorth_node && uninorth_node->n_addrs > 0) { - /* Small hack until I figure out if parsing in prom.c is correct. I should - * get rid of those pre-parsed junk anyway - */ - unsigned long address = uninorth_node->addrs[0].address; - uninorth_base = ioremap(address, 0x40000); - uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); - u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); - } else - uninorth_node = NULL; - - if (!uninorth_node) - return; - - printk(KERN_INFO "Found U3 memory controller & host bridge, revision: %d\n", - uninorth_rev); - printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); - -} - -static void __init probe_one_macio(const char* name, const char* compat, int type) -{ - struct device_node* node; - int i; - volatile u32* base; - u32* revp; - - node = find_devices(name); - if (!node || !node->n_addrs) - return; - if (compat) - do { - if (device_is_compatible(node, compat)) - break; - node = node->next; - } while (node); - if (!node) - return; - for(i=0; i= MAX_MACIO_CHIPS) { - printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); - printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name); - return; - } - base = (volatile u32*)ioremap(node->addrs[0].address, node->addrs[0].size); - if (!base) { - printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n"); - return; - } - if (type == macio_keylargo) { - u32* did = (u32 *)get_property(node, "device-id", NULL); - if (*did == 0x00000025) - type = macio_pangea; - if (*did == 0x0000003e) - type = macio_intrepid; - } - macio_chips[i].of_node = node; - macio_chips[i].type = type; - macio_chips[i].base = base; - macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON; - macio_chips[i].name = macio_names[type]; - revp = (u32 *)get_property(node, "revision-id", NULL); - if (revp) - macio_chips[i].rev = *revp; - printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n", - macio_names[type], macio_chips[i].rev, macio_chips[i].base); -} - -static int __init -probe_macios(void) -{ - probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2); - - macio_chips[0].lbus.index = 0; - macio_chips[1].lbus.index = 1; - - return (macio_chips[0].of_node == NULL) ? -ENODEV : 0; -} - -static void __init -set_initial_features(void) -{ - struct device_node *np; - - if (macio_chips[0].type == macio_keylargo2) { -#ifndef CONFIG_SMP - /* On SMP machines running UP, we have the second CPU eating - * bus cycles. We need to take it off the bus. This is done - * from pmac_smp for SMP kernels running on one CPU - */ - np = of_find_node_by_type(NULL, "cpu"); - if (np != NULL) - np = of_find_node_by_type(np, "cpu"); - if (np != NULL) { - g5_phy_disable_cpu1(); - of_node_put(np); - } -#endif /* CONFIG_SMP */ - /* Enable GMAC for now for PCI probing. It will be disabled - * later on after PCI probe - */ - np = of_find_node_by_name(NULL, "ethernet"); - while(np) { - if (device_is_compatible(np, "K2-GMAC")) - g5_gmac_enable(np, 0, 1); - np = of_find_node_by_name(np, "ethernet"); - } - - /* Enable FW before PCI probe. Will be disabled later on - * Note: We should have a batter way to check that we are - * dealing with uninorth internal cell and not a PCI cell - * on the external PCI. The code below works though. - */ - np = of_find_node_by_name(NULL, "firewire"); - while(np) { - if (device_is_compatible(np, "pci106b,5811")) { - macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; - g5_fw_enable(np, 0, 1); - } - np = of_find_node_by_name(np, "firewire"); - } - } -} - -void __init -pmac_feature_init(void) -{ - /* Detect the UniNorth memory controller */ - probe_uninorth(); - - /* Probe mac-io controllers */ - if (probe_macios()) { - printk(KERN_WARNING "No mac-io chip found\n"); - return; - } - - /* Setup low-level i2c stuffs */ - pmac_init_low_i2c(); - - /* Probe machine type */ - if (probe_motherboard()) - printk(KERN_WARNING "Unknown PowerMac !\n"); - - /* Set some initial features (turn off some chips that will - * be later turned on) - */ - set_initial_features(); -} - -int __init pmac_feature_late_init(void) -{ -#if 0 - struct device_node* np; - - /* Request some resources late */ - if (uninorth_node) - request_OF_resource(uninorth_node, 0, NULL); - np = find_devices("hammerhead"); - if (np) - request_OF_resource(np, 0, NULL); - np = find_devices("interrupt-controller"); - if (np) - request_OF_resource(np, 0, NULL); -#endif - return 0; -} - -device_initcall(pmac_feature_late_init); - -#if 0 -static void dump_HT_speeds(char *name, u32 cfg, u32 frq) -{ - int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 }; - int bits[8] = { 8,16,0,32,2,4,0,0 }; - int freq = (frq >> 8) & 0xf; - - if (freqs[freq] == 0) - printk("%s: Unknown HT link frequency %x\n", name, freq); - else - printk("%s: %d MHz on main link, (%d in / %d out) bits width\n", - name, freqs[freq], - bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]); -} -#endif - -void __init pmac_check_ht_link(void) -{ -#if 0 /* Disabled for now */ - u32 ufreq, freq, ucfg, cfg; - struct device_node *pcix_node; - struct pci_dn *pdn; - u8 px_bus, px_devfn; - struct pci_controller *px_hose; - - (void)in_be32(u3_ht + U3_HT_LINK_COMMAND); - ucfg = cfg = in_be32(u3_ht + U3_HT_LINK_CONFIG); - ufreq = freq = in_be32(u3_ht + U3_HT_LINK_FREQ); - dump_HT_speeds("U3 HyperTransport", cfg, freq); - - pcix_node = of_find_compatible_node(NULL, "pci", "pci-x"); - if (pcix_node == NULL) { - printk("No PCI-X bridge found\n"); - return; - } - pdn = pcix_node->data; - px_hose = pdn->phb; - px_bus = pdn->busno; - px_devfn = pdn->devfn; - - early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg); - early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq); - dump_HT_speeds("PCI-X HT Uplink", cfg, freq); - early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg); - early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq); - dump_HT_speeds("PCI-X HT Downlink", cfg, freq); -#endif -} - -/* - * Early video resume hook - */ - -static void (*pmac_early_vresume_proc)(void *data); -static void *pmac_early_vresume_data; - -void pmac_set_early_video_resume(void (*proc)(void *data), void *data) -{ - if (_machine != _MACH_Pmac) - return; - preempt_disable(); - pmac_early_vresume_proc = proc; - pmac_early_vresume_data = data; - preempt_enable(); -} -EXPORT_SYMBOL(pmac_set_early_video_resume); - - -/* - * AGP related suspend/resume code - */ - -static struct pci_dev *pmac_agp_bridge; -static int (*pmac_agp_suspend)(struct pci_dev *bridge); -static int (*pmac_agp_resume)(struct pci_dev *bridge); - -void pmac_register_agp_pm(struct pci_dev *bridge, - int (*suspend)(struct pci_dev *bridge), - int (*resume)(struct pci_dev *bridge)) -{ - if (suspend || resume) { - pmac_agp_bridge = bridge; - pmac_agp_suspend = suspend; - pmac_agp_resume = resume; - return; - } - if (bridge != pmac_agp_bridge) - return; - pmac_agp_suspend = pmac_agp_resume = NULL; - return; -} -EXPORT_SYMBOL(pmac_register_agp_pm); - -void pmac_suspend_agp_for_card(struct pci_dev *dev) -{ - if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL) - return; - if (pmac_agp_bridge->bus != dev->bus) - return; - pmac_agp_suspend(pmac_agp_bridge); -} -EXPORT_SYMBOL(pmac_suspend_agp_for_card); - -void pmac_resume_agp_for_card(struct pci_dev *dev) -{ - if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL) - return; - if (pmac_agp_bridge->bus != dev->bus) - return; - pmac_agp_resume(pmac_agp_bridge); -} -EXPORT_SYMBOL(pmac_resume_agp_for_card); diff --git a/arch/ppc64/kernel/pmac_low_i2c.c b/arch/ppc64/kernel/pmac_low_i2c.c deleted file mode 100644 index f3f39e8e33..0000000000 --- a/arch/ppc64/kernel/pmac_low_i2c.c +++ /dev/null @@ -1,523 +0,0 @@ -/* - * arch/ppc/platforms/pmac_low_i2c.c - * - * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * This file contains some low-level i2c access routines that - * need to be used by various bits of the PowerMac platform code - * at times where the real asynchronous & interrupt driven driver - * cannot be used. The API borrows some semantics from the darwin - * driver in order to ease the implementation of the platform - * properties parser - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MAX_LOW_I2C_HOST 4 - -#ifdef DEBUG -#define DBG(x...) do {\ - printk(KERN_DEBUG "KW:" x); \ - } while(0) -#else -#define DBG(x...) -#endif - -struct low_i2c_host; - -typedef int (*low_i2c_func_t)(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len); - -struct low_i2c_host -{ - struct device_node *np; /* OF device node */ - struct semaphore mutex; /* Access mutex for use by i2c-keywest */ - low_i2c_func_t func; /* Access function */ - unsigned int is_open : 1; /* Poor man's access control */ - int mode; /* Current mode */ - int channel; /* Current channel */ - int num_channels; /* Number of channels */ - void __iomem *base; /* For keywest-i2c, base address */ - int bsteps; /* And register stepping */ - int speed; /* And speed */ -}; - -static struct low_i2c_host low_i2c_hosts[MAX_LOW_I2C_HOST]; - -/* No locking is necessary on allocation, we are running way before - * anything can race with us - */ -static struct low_i2c_host *find_low_i2c_host(struct device_node *np) -{ - int i; - - for (i = 0; i < MAX_LOW_I2C_HOST; i++) - if (low_i2c_hosts[i].np == np) - return &low_i2c_hosts[i]; - return NULL; -} - -/* - * - * i2c-keywest implementation (UniNorth, U2, U3, Keylargo's) - * - */ - -/* - * Keywest i2c definitions borrowed from drivers/i2c/i2c-keywest.h, - * should be moved somewhere in include/asm-ppc/ - */ -/* Register indices */ -typedef enum { - reg_mode = 0, - reg_control, - reg_status, - reg_isr, - reg_ier, - reg_addr, - reg_subaddr, - reg_data -} reg_t; - - -/* Mode register */ -#define KW_I2C_MODE_100KHZ 0x00 -#define KW_I2C_MODE_50KHZ 0x01 -#define KW_I2C_MODE_25KHZ 0x02 -#define KW_I2C_MODE_DUMB 0x00 -#define KW_I2C_MODE_STANDARD 0x04 -#define KW_I2C_MODE_STANDARDSUB 0x08 -#define KW_I2C_MODE_COMBINED 0x0C -#define KW_I2C_MODE_MODE_MASK 0x0C -#define KW_I2C_MODE_CHAN_MASK 0xF0 - -/* Control register */ -#define KW_I2C_CTL_AAK 0x01 -#define KW_I2C_CTL_XADDR 0x02 -#define KW_I2C_CTL_STOP 0x04 -#define KW_I2C_CTL_START 0x08 - -/* Status register */ -#define KW_I2C_STAT_BUSY 0x01 -#define KW_I2C_STAT_LAST_AAK 0x02 -#define KW_I2C_STAT_LAST_RW 0x04 -#define KW_I2C_STAT_SDA 0x08 -#define KW_I2C_STAT_SCL 0x10 - -/* IER & ISR registers */ -#define KW_I2C_IRQ_DATA 0x01 -#define KW_I2C_IRQ_ADDR 0x02 -#define KW_I2C_IRQ_STOP 0x04 -#define KW_I2C_IRQ_START 0x08 -#define KW_I2C_IRQ_MASK 0x0F - -/* State machine states */ -enum { - state_idle, - state_addr, - state_read, - state_write, - state_stop, - state_dead -}; - -#define WRONG_STATE(name) do {\ - printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s (isr: %02x)\n", \ - name, __kw_state_names[state], isr); \ - } while(0) - -static const char *__kw_state_names[] = { - "state_idle", - "state_addr", - "state_read", - "state_write", - "state_stop", - "state_dead" -}; - -static inline u8 __kw_read_reg(struct low_i2c_host *host, reg_t reg) -{ - return readb(host->base + (((unsigned int)reg) << host->bsteps)); -} - -static inline void __kw_write_reg(struct low_i2c_host *host, reg_t reg, u8 val) -{ - writeb(val, host->base + (((unsigned)reg) << host->bsteps)); - (void)__kw_read_reg(host, reg_subaddr); -} - -#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val) -#define kw_read_reg(reg) __kw_read_reg(host, reg) - - -/* Don't schedule, the g5 fan controller is too - * timing sensitive - */ -static u8 kw_wait_interrupt(struct low_i2c_host* host) -{ - int i, j; - u8 isr; - - for (i = 0; i < 100000; i++) { - isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK; - if (isr != 0) - return isr; - - /* This code is used with the timebase frozen, we cannot rely - * on udelay ! For now, just use a bogus loop - */ - for (j = 1; j < 10000; j++) - mb(); - } - return isr; -} - -static int kw_handle_interrupt(struct low_i2c_host *host, int state, int rw, int *rc, u8 **data, int *len, u8 isr) -{ - u8 ack; - - DBG("kw_handle_interrupt(%s, isr: %x)\n", __kw_state_names[state], isr); - - if (isr == 0) { - if (state != state_stop) { - DBG("KW: Timeout !\n"); - *rc = -EIO; - goto stop; - } - if (state == state_stop) { - ack = kw_read_reg(reg_status); - if (!(ack & KW_I2C_STAT_BUSY)) { - state = state_idle; - kw_write_reg(reg_ier, 0x00); - } - } - return state; - } - - if (isr & KW_I2C_IRQ_ADDR) { - ack = kw_read_reg(reg_status); - if (state != state_addr) { - kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); - WRONG_STATE("KW_I2C_IRQ_ADDR"); - *rc = -EIO; - goto stop; - } - if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { - *rc = -ENODEV; - DBG("KW: NAK on address\n"); - return state_stop; - } else { - if (rw) { - state = state_read; - if (*len > 1) - kw_write_reg(reg_control, KW_I2C_CTL_AAK); - } else { - state = state_write; - kw_write_reg(reg_data, **data); - (*data)++; (*len)--; - } - } - kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); - } - - if (isr & KW_I2C_IRQ_DATA) { - if (state == state_read) { - **data = kw_read_reg(reg_data); - (*data)++; (*len)--; - kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); - if ((*len) == 0) - state = state_stop; - else if ((*len) == 1) - kw_write_reg(reg_control, 0); - } else if (state == state_write) { - ack = kw_read_reg(reg_status); - if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { - DBG("KW: nack on data write\n"); - *rc = -EIO; - goto stop; - } else if (*len) { - kw_write_reg(reg_data, **data); - (*data)++; (*len)--; - } else { - kw_write_reg(reg_control, KW_I2C_CTL_STOP); - state = state_stop; - *rc = 0; - } - kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); - } else { - kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); - WRONG_STATE("KW_I2C_IRQ_DATA"); - if (state != state_stop) { - *rc = -EIO; - goto stop; - } - } - } - - if (isr & KW_I2C_IRQ_STOP) { - kw_write_reg(reg_isr, KW_I2C_IRQ_STOP); - if (state != state_stop) { - WRONG_STATE("KW_I2C_IRQ_STOP"); - *rc = -EIO; - } - return state_idle; - } - - if (isr & KW_I2C_IRQ_START) - kw_write_reg(reg_isr, KW_I2C_IRQ_START); - - return state; - - stop: - kw_write_reg(reg_control, KW_I2C_CTL_STOP); - return state_stop; -} - -static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr, u8 *data, int len) -{ - u8 mode_reg = host->speed; - int state = state_addr; - int rc = 0; - - /* Setup mode & subaddress if any */ - switch(host->mode) { - case pmac_low_i2c_mode_dumb: - printk(KERN_ERR "low_i2c: Dumb mode not supported !\n"); - return -EINVAL; - case pmac_low_i2c_mode_std: - mode_reg |= KW_I2C_MODE_STANDARD; - break; - case pmac_low_i2c_mode_stdsub: - mode_reg |= KW_I2C_MODE_STANDARDSUB; - break; - case pmac_low_i2c_mode_combined: - mode_reg |= KW_I2C_MODE_COMBINED; - break; - } - - /* Setup channel & clear pending irqs */ - kw_write_reg(reg_isr, kw_read_reg(reg_isr)); - kw_write_reg(reg_mode, mode_reg | (host->channel << 4)); - kw_write_reg(reg_status, 0); - - /* Set up address and r/w bit */ - kw_write_reg(reg_addr, addr); - - /* Set up the sub address */ - if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB - || (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED) - kw_write_reg(reg_subaddr, subaddr); - - /* Start sending address & disable interrupt*/ - kw_write_reg(reg_ier, 0 /*KW_I2C_IRQ_MASK*/); - kw_write_reg(reg_control, KW_I2C_CTL_XADDR); - - /* State machine, to turn into an interrupt handler */ - while(state != state_idle) { - u8 isr = kw_wait_interrupt(host); - state = kw_handle_interrupt(host, state, addr & 1, &rc, &data, &len, isr); - } - - return rc; -} - -static void keywest_low_i2c_add(struct device_node *np) -{ - struct low_i2c_host *host = find_low_i2c_host(NULL); - u32 *psteps, *prate, steps, aoffset = 0; - struct device_node *parent; - - if (host == NULL) { - printk(KERN_ERR "low_i2c: Can't allocate host for %s\n", - np->full_name); - return; - } - memset(host, 0, sizeof(*host)); - - init_MUTEX(&host->mutex); - host->np = of_node_get(np); - psteps = (u32 *)get_property(np, "AAPL,address-step", NULL); - steps = psteps ? (*psteps) : 0x10; - for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++) - steps >>= 1; - parent = of_get_parent(np); - host->num_channels = 1; - if (parent && parent->name[0] == 'u') { - host->num_channels = 2; - aoffset = 3; - } - /* Select interface rate */ - host->speed = KW_I2C_MODE_100KHZ; - prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL); - if (prate) switch(*prate) { - case 100: - host->speed = KW_I2C_MODE_100KHZ; - break; - case 50: - host->speed = KW_I2C_MODE_50KHZ; - break; - case 25: - host->speed = KW_I2C_MODE_25KHZ; - break; - } - - host->mode = pmac_low_i2c_mode_std; - host->base = ioremap(np->addrs[0].address + aoffset, - np->addrs[0].size); - host->func = keywest_low_i2c_func; -} - -/* - * - * PMU implementation - * - */ - - -#ifdef CONFIG_ADB_PMU - -static int pmu_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len) -{ - // TODO - return -ENODEV; -} - -static void pmu_low_i2c_add(struct device_node *np) -{ - struct low_i2c_host *host = find_low_i2c_host(NULL); - - if (host == NULL) { - printk(KERN_ERR "low_i2c: Can't allocate host for %s\n", - np->full_name); - return; - } - memset(host, 0, sizeof(*host)); - - init_MUTEX(&host->mutex); - host->np = of_node_get(np); - host->num_channels = 3; - host->mode = pmac_low_i2c_mode_std; - host->func = pmu_low_i2c_func; -} - -#endif /* CONFIG_ADB_PMU */ - -void __init pmac_init_low_i2c(void) -{ - struct device_node *np; - - /* Probe keywest-i2c busses */ - np = of_find_compatible_node(NULL, "i2c", "keywest-i2c"); - while(np) { - keywest_low_i2c_add(np); - np = of_find_compatible_node(np, "i2c", "keywest-i2c"); - } - -#ifdef CONFIG_ADB_PMU - /* Probe PMU busses */ - np = of_find_node_by_name(NULL, "via-pmu"); - if (np) - pmu_low_i2c_add(np); -#endif /* CONFIG_ADB_PMU */ - - /* TODO: Add CUDA support as well */ -} - -int pmac_low_i2c_lock(struct device_node *np) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - down(&host->mutex); - return 0; -} -EXPORT_SYMBOL(pmac_low_i2c_lock); - -int pmac_low_i2c_unlock(struct device_node *np) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - up(&host->mutex); - return 0; -} -EXPORT_SYMBOL(pmac_low_i2c_unlock); - - -int pmac_low_i2c_open(struct device_node *np, int channel) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - - if (channel >= host->num_channels) - return -EINVAL; - - down(&host->mutex); - host->is_open = 1; - host->channel = channel; - - return 0; -} -EXPORT_SYMBOL(pmac_low_i2c_open); - -int pmac_low_i2c_close(struct device_node *np) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - - host->is_open = 0; - up(&host->mutex); - - return 0; -} -EXPORT_SYMBOL(pmac_low_i2c_close); - -int pmac_low_i2c_setmode(struct device_node *np, int mode) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - WARN_ON(!host->is_open); - host->mode = mode; - - return 0; -} -EXPORT_SYMBOL(pmac_low_i2c_setmode); - -int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len) -{ - struct low_i2c_host *host = find_low_i2c_host(np); - - if (!host) - return -ENODEV; - WARN_ON(!host->is_open); - - return host->func(host, addrdir, subaddr, data, len); -} -EXPORT_SYMBOL(pmac_low_i2c_xfer); - diff --git a/arch/ppc64/kernel/pmac_nvram.c b/arch/ppc64/kernel/pmac_nvram.c deleted file mode 100644 index 5fe9785ad7..0000000000 --- a/arch/ppc64/kernel/pmac_nvram.c +++ /dev/null @@ -1,493 +0,0 @@ -/* - * arch/ppc/platforms/pmac_nvram.c - * - * Copyright (C) 2002 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Todo: - add support for the OF persistent properties - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -#define NVRAM_SIZE 0x2000 /* 8kB of non-volatile RAM */ - -#define CORE99_SIGNATURE 0x5a -#define CORE99_ADLER_START 0x14 - -/* On Core99, nvram is either a sharp, a micron or an AMD flash */ -#define SM_FLASH_STATUS_DONE 0x80 -#define SM_FLASH_STATUS_ERR 0x38 - -#define SM_FLASH_CMD_ERASE_CONFIRM 0xd0 -#define SM_FLASH_CMD_ERASE_SETUP 0x20 -#define SM_FLASH_CMD_RESET 0xff -#define SM_FLASH_CMD_WRITE_SETUP 0x40 -#define SM_FLASH_CMD_CLEAR_STATUS 0x50 -#define SM_FLASH_CMD_READ_STATUS 0x70 - -/* CHRP NVRAM header */ -struct chrp_header { - u8 signature; - u8 cksum; - u16 len; - char name[12]; - u8 data[0]; -}; - -struct core99_header { - struct chrp_header hdr; - u32 adler; - u32 generation; - u32 reserved[2]; -}; - -/* - * Read and write the non-volatile RAM on PowerMacs and CHRP machines. - */ -static volatile unsigned char *nvram_data; -static int core99_bank = 0; -// XXX Turn that into a sem -static DEFINE_SPINLOCK(nv_lock); - -extern int system_running; - -static int (*core99_write_bank)(int bank, u8* datas); -static int (*core99_erase_bank)(int bank); - -static char *nvram_image; - - -static ssize_t core99_nvram_read(char *buf, size_t count, loff_t *index) -{ - int i; - - if (nvram_image == NULL) - return -ENODEV; - if (*index > NVRAM_SIZE) - return 0; - - i = *index; - if (i + count > NVRAM_SIZE) - count = NVRAM_SIZE - i; - - memcpy(buf, &nvram_image[i], count); - *index = i + count; - return count; -} - -static ssize_t core99_nvram_write(char *buf, size_t count, loff_t *index) -{ - int i; - - if (nvram_image == NULL) - return -ENODEV; - if (*index > NVRAM_SIZE) - return 0; - - i = *index; - if (i + count > NVRAM_SIZE) - count = NVRAM_SIZE - i; - - memcpy(&nvram_image[i], buf, count); - *index = i + count; - return count; -} - -static ssize_t core99_nvram_size(void) -{ - if (nvram_image == NULL) - return -ENODEV; - return NVRAM_SIZE; -} - -static u8 chrp_checksum(struct chrp_header* hdr) -{ - u8 *ptr; - u16 sum = hdr->signature; - for (ptr = (u8 *)&hdr->len; ptr < hdr->data; ptr++) - sum += *ptr; - while (sum > 0xFF) - sum = (sum & 0xFF) + (sum>>8); - return sum; -} - -static u32 core99_calc_adler(u8 *buffer) -{ - int cnt; - u32 low, high; - - buffer += CORE99_ADLER_START; - low = 1; - high = 0; - for (cnt=0; cnt<(NVRAM_SIZE-CORE99_ADLER_START); cnt++) { - if ((cnt % 5000) == 0) { - high %= 65521UL; - high %= 65521UL; - } - low += buffer[cnt]; - high += low; - } - low %= 65521UL; - high %= 65521UL; - - return (high << 16) | low; -} - -static u32 core99_check(u8* datas) -{ - struct core99_header* hdr99 = (struct core99_header*)datas; - - if (hdr99->hdr.signature != CORE99_SIGNATURE) { - DBG("Invalid signature\n"); - return 0; - } - if (hdr99->hdr.cksum != chrp_checksum(&hdr99->hdr)) { - DBG("Invalid checksum\n"); - return 0; - } - if (hdr99->adler != core99_calc_adler(datas)) { - DBG("Invalid adler\n"); - return 0; - } - return hdr99->generation; -} - -static int sm_erase_bank(int bank) -{ - int stat, i; - unsigned long timeout; - - u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; - - DBG("nvram: Sharp/Micron Erasing bank %d...\n", bank); - - out_8(base, SM_FLASH_CMD_ERASE_SETUP); - out_8(base, SM_FLASH_CMD_ERASE_CONFIRM); - timeout = 0; - do { - if (++timeout > 1000000) { - printk(KERN_ERR "nvram: Sharp/Miron flash erase timeout !\n"); - break; - } - out_8(base, SM_FLASH_CMD_READ_STATUS); - stat = in_8(base); - } while (!(stat & SM_FLASH_STATUS_DONE)); - - out_8(base, SM_FLASH_CMD_CLEAR_STATUS); - out_8(base, SM_FLASH_CMD_RESET); - - for (i=0; i 1000000) { - printk(KERN_ERR "nvram: Sharp/Micron flash write timeout !\n"); - break; - } - out_8(base, SM_FLASH_CMD_READ_STATUS); - stat = in_8(base); - } while (!(stat & SM_FLASH_STATUS_DONE)); - if (!(stat & SM_FLASH_STATUS_DONE)) - break; - } - out_8(base, SM_FLASH_CMD_CLEAR_STATUS); - out_8(base, SM_FLASH_CMD_RESET); - for (i=0; i 1000000) { - printk(KERN_ERR "nvram: AMD flash erase timeout !\n"); - break; - } - stat = in_8(base) ^ in_8(base); - } while (stat != 0); - - /* Reset */ - out_8(base, 0xf0); - udelay(1); - - for (i=0; i 1000000) { - printk(KERN_ERR "nvram: AMD flash write timeout !\n"); - break; - } - stat = in_8(base) ^ in_8(base); - } while (stat != 0); - if (stat != 0) - break; - } - - /* Reset */ - out_8(base, 0xf0); - udelay(1); - - for (i=0; igeneration++; - hdr99->hdr.signature = CORE99_SIGNATURE; - hdr99->hdr.cksum = chrp_checksum(&hdr99->hdr); - hdr99->adler = core99_calc_adler(nvram_image); - core99_bank = core99_bank ? 0 : 1; - if (core99_erase_bank) - if (core99_erase_bank(core99_bank)) { - printk("nvram: Error erasing bank %d\n", core99_bank); - goto bail; - } - if (core99_write_bank) - if (core99_write_bank(core99_bank, nvram_image)) - printk("nvram: Error writing bank %d\n", core99_bank); - bail: - spin_unlock_irqrestore(&nv_lock, flags); -} - -int __init pmac_nvram_init(void) -{ - struct device_node *dp; - u32 gen_bank0, gen_bank1; - int i; - - dp = find_devices("nvram"); - if (dp == NULL) { - printk(KERN_ERR "Can't find NVRAM device\n"); - return -ENODEV; - } - if (!device_is_compatible(dp, "nvram,flash")) { - printk(KERN_ERR "Incompatible type of NVRAM\n"); - return -ENXIO; - } - - nvram_image = alloc_bootmem(NVRAM_SIZE); - if (nvram_image == NULL) { - printk(KERN_ERR "nvram: can't allocate ram image\n"); - return -ENOMEM; - } - nvram_data = ioremap(dp->addrs[0].address, NVRAM_SIZE*2); - - DBG("nvram: Checking bank 0...\n"); - - gen_bank0 = core99_check((u8 *)nvram_data); - gen_bank1 = core99_check((u8 *)nvram_data + NVRAM_SIZE); - core99_bank = (gen_bank0 < gen_bank1) ? 1 : 0; - - DBG("nvram: gen0=%d, gen1=%d\n", gen_bank0, gen_bank1); - DBG("nvram: Active bank is: %d\n", core99_bank); - - for (i=0; iindex; -} - -u8 pmac_xpram_read(int xpaddr) -{ - int offset = pmac_get_partition(pmac_nvram_XPRAM); - loff_t index; - u8 buf; - ssize_t count; - - if (offset < 0 || xpaddr < 0 || xpaddr > 0x100) - return 0xff; - index = offset + xpaddr; - - count = ppc_md.nvram_read(&buf, 1, &index); - if (count != 1) - return 0xff; - return buf; -} - -void pmac_xpram_write(int xpaddr, u8 data) -{ - int offset = pmac_get_partition(pmac_nvram_XPRAM); - loff_t index; - u8 buf; - - if (offset < 0 || xpaddr < 0 || xpaddr > 0x100) - return; - index = offset + xpaddr; - buf = data; - - ppc_md.nvram_write(&buf, 1, &index); -} - -EXPORT_SYMBOL(pmac_get_partition); -EXPORT_SYMBOL(pmac_xpram_read); -EXPORT_SYMBOL(pmac_xpram_write); diff --git a/arch/ppc64/kernel/pmac_pci.c b/arch/ppc64/kernel/pmac_pci.c deleted file mode 100644 index 7a81c82759..0000000000 --- a/arch/ppc64/kernel/pmac_pci.c +++ /dev/null @@ -1,793 +0,0 @@ -/* - * Support for PCI bridges found on Power Macintoshes. - * At present the "bandit" and "chaos" bridges are supported. - * Fortunately you access configuration space in the same - * way with either bridge. - * - * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org) - * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "pmac.h" - -#define DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -/* XXX Could be per-controller, but I don't think we risk anything by - * assuming we won't have both UniNorth and Bandit */ -static int has_uninorth; -static struct pci_controller *u3_agp; -struct device_node *k2_skiplist[2]; - -static int __init fixup_one_level_bus_range(struct device_node *node, int higher) -{ - for (; node != 0;node = node->sibling) { - int * bus_range; - unsigned int *class_code; - int len; - - /* For PCI<->PCI bridges or CardBus bridges, we go down */ - class_code = (unsigned int *) get_property(node, "class-code", NULL); - if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && - (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) - continue; - bus_range = (int *) get_property(node, "bus-range", &len); - if (bus_range != NULL && len > 2 * sizeof(int)) { - if (bus_range[1] > higher) - higher = bus_range[1]; - } - higher = fixup_one_level_bus_range(node->child, higher); - } - return higher; -} - -/* This routine fixes the "bus-range" property of all bridges in the - * system since they tend to have their "last" member wrong on macs - * - * Note that the bus numbers manipulated here are OF bus numbers, they - * are not Linux bus numbers. - */ -static void __init fixup_bus_range(struct device_node *bridge) -{ - int * bus_range; - int len; - - /* Lookup the "bus-range" property for the hose */ - bus_range = (int *) get_property(bridge, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s\n", - bridge->full_name); - return; - } - bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); -} - -/* - * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers. - * - * The "Bandit" version is present in all early PCI PowerMacs, - * and up to the first ones using Grackle. Some machines may - * have 2 bandit controllers (2 PCI busses). - * - * "Chaos" is used in some "Bandit"-type machines as a bridge - * for the separate display bus. It is accessed the same - * way as bandit, but cannot be probed for devices. It therefore - * has its own config access functions. - * - * The "UniNorth" version is present in all Core99 machines - * (iBook, G4, new IMacs, and all the recent Apple machines). - * It contains 3 controllers in one ASIC. - * - * The U3 is the bridge used on G5 machines. It contains on - * AGP bus which is dealt with the old UniNorth access routines - * and an HyperTransport bus which uses its own set of access - * functions. - */ - -#define MACRISC_CFA0(devfn, off) \ - ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ - | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ - | (((unsigned long)(off)) & 0xFCUL)) - -#define MACRISC_CFA1(bus, devfn, off) \ - ((((unsigned long)(bus)) << 16) \ - |(((unsigned long)(devfn)) << 8) \ - |(((unsigned long)(off)) & 0xFCUL) \ - |1UL) - -static unsigned long macrisc_cfg_access(struct pci_controller* hose, - u8 bus, u8 dev_fn, u8 offset) -{ - unsigned int caddr; - - if (bus == hose->first_busno) { - if (dev_fn < (11 << 3)) - return 0; - caddr = MACRISC_CFA0(dev_fn, offset); - } else - caddr = MACRISC_CFA1(bus, dev_fn, offset); - - /* Uninorth will return garbage if we don't read back the value ! */ - do { - out_le32(hose->cfg_addr, caddr); - } while (in_le32(hose->cfg_addr) != caddr); - - offset &= has_uninorth ? 0x07 : 0x03; - return ((unsigned long)hose->cfg_data) + offset; -} - -static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 *val) -{ - struct pci_controller *hose; - unsigned long addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = macrisc_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - *val = in_8((u8 *)addr); - break; - case 2: - *val = in_le16((u16 *)addr); - break; - default: - *val = in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose; - unsigned long addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = macrisc_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); - break; - case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); - break; - default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops macrisc_pci_ops = -{ - macrisc_read_config, - macrisc_write_config -}; - -/* - * These versions of U3 HyperTransport config space access ops do not - * implement self-view of the HT host yet - */ - -/* - * This function deals with some "special cases" devices. - * - * 0 -> No special case - * 1 -> Skip the device but act as if the access was successfull - * (return 0xff's on reads, eventually, cache config space - * accesses in a later version) - * -1 -> Hide the device (unsuccessful acess) - */ -static int u3_ht_skip_device(struct pci_controller *hose, - struct pci_bus *bus, unsigned int devfn) -{ - struct device_node *busdn, *dn; - int i; - - /* We only allow config cycles to devices that are in OF device-tree - * as we are apparently having some weird things going on with some - * revs of K2 on recent G5s - */ - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = hose->arch_data; - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn) - break; - if (dn == NULL) - return -1; - - /* - * When a device in K2 is powered down, we die on config - * cycle accesses. Fix that here. - */ - for (i=0; i<2; i++) - if (k2_skiplist[i] == dn) - return 1; - - return 0; -} - -#define U3_HT_CFA0(devfn, off) \ - ((((unsigned long)devfn) << 8) | offset) -#define U3_HT_CFA1(bus, devfn, off) \ - (U3_HT_CFA0(devfn, off) \ - + (((unsigned long)bus) << 16) \ - + 0x01000000UL) - -static unsigned long u3_ht_cfg_access(struct pci_controller* hose, - u8 bus, u8 devfn, u8 offset) -{ - if (bus == hose->first_busno) { - /* For now, we don't self probe U3 HT bridge */ - if (PCI_SLOT(devfn) == 0) - return 0; - return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); - } else - return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); -} - -static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 *val) -{ - struct pci_controller *hose; - unsigned long addr; - - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - switch (u3_ht_skip_device(hose, bus, devfn)) { - case 0: - break; - case 1: - switch (len) { - case 1: - *val = 0xff; break; - case 2: - *val = 0xffff; break; - default: - *val = 0xfffffffful; break; - } - return PCIBIOS_SUCCESSFUL; - default: - return PCIBIOS_DEVICE_NOT_FOUND; - } - - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - *val = in_8((u8 *)addr); - break; - case 2: - *val = in_le16((u16 *)addr); - break; - default: - *val = in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose; - unsigned long addr; - - hose = pci_bus_to_host(bus); - if (hose == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - switch (u3_ht_skip_device(hose, bus, devfn)) { - case 0: - break; - case 1: - return PCIBIOS_SUCCESSFUL; - default: - return PCIBIOS_DEVICE_NOT_FOUND; - } - - /* - * Note: the caller has already checked that offset is - * suitably aligned and that len is 1, 2 or 4. - */ - switch (len) { - case 1: - out_8((u8 *)addr, val); - (void) in_8((u8 *)addr); - break; - case 2: - out_le16((u16 *)addr, val); - (void) in_le16((u16 *)addr); - break; - default: - out_le32((u32 *)addr, val); - (void) in_le32((u32 *)addr); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops u3_ht_pci_ops = -{ - u3_ht_read_config, - u3_ht_write_config -}; - -static void __init setup_u3_agp(struct pci_controller* hose) -{ - /* On G5, we move AGP up to high bus number so we don't need - * to reassign bus numbers for HT. If we ever have P2P bridges - * on AGP, we'll have to move pci_assign_all_buses to the - * pci_controller structure so we enable it for AGP and not for - * HT childs. - * We hard code the address because of the different size of - * the reg address cell, we shall fix that by killing struct - * reg_property and using some accessor functions instead - */ - hose->first_busno = 0xf0; - hose->last_busno = 0xff; - has_uninorth = 1; - hose->ops = ¯isc_pci_ops; - hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); - hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); - - u3_agp = hose; -} - -static void __init setup_u3_ht(struct pci_controller* hose) -{ - struct device_node *np = (struct device_node *)hose->arch_data; - int i, cur; - - hose->ops = &u3_ht_pci_ops; - - /* We hard code the address because of the different size of - * the reg address cell, we shall fix that by killing struct - * reg_property and using some accessor functions instead - */ - hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); - - /* - * /ht node doesn't expose a "ranges" property, so we "remove" regions that - * have been allocated to AGP. So far, this version of the code doesn't assign - * any of the 0xfxxxxxxx "fine" memory regions to /ht. - * We need to fix that sooner or later by either parsing all child "ranges" - * properties or figuring out the U3 address space decoding logic and - * then read it's configuration register (if any). - */ - hose->io_base_phys = 0xf4000000; - hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000); - isa_io_base = pci_io_base = (unsigned long) hose->io_base_virt; - hose->io_resource.name = np->full_name; - hose->io_resource.start = 0; - hose->io_resource.end = 0x003fffff; - hose->io_resource.flags = IORESOURCE_IO; - hose->pci_mem_offset = 0; - hose->first_busno = 0; - hose->last_busno = 0xef; - hose->mem_resources[0].name = np->full_name; - hose->mem_resources[0].start = 0x80000000; - hose->mem_resources[0].end = 0xefffffff; - hose->mem_resources[0].flags = IORESOURCE_MEM; - - if (u3_agp == NULL) { - DBG("U3 has no AGP, using full resource range\n"); - return; - } - - /* We "remove" the AGP resources from the resources allocated to HT, that - * is we create "holes". However, that code does assumptions that so far - * happen to be true (cross fingers...), typically that resources in the - * AGP node are properly ordered - */ - cur = 0; - for (i=0; i<3; i++) { - struct resource *res = &u3_agp->mem_resources[i]; - if (res->flags != IORESOURCE_MEM) - continue; - /* We don't care about "fine" resources */ - if (res->start >= 0xf0000000) - continue; - /* Check if it's just a matter of "shrinking" us in one direction */ - if (hose->mem_resources[cur].start == res->start) { - DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].start, res->end + 1); - hose->mem_resources[cur].start = res->end + 1; - continue; - } - if (hose->mem_resources[cur].end == res->end) { - DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].end, res->start - 1); - hose->mem_resources[cur].end = res->start - 1; - continue; - } - /* No, it's not the case, we need a hole */ - if (cur == 2) { - /* not enough resources for a hole, we drop part of the range */ - printk(KERN_WARNING "Running out of resources for /ht host !\n"); - hose->mem_resources[cur].end = res->start - 1; - continue; - } - cur++; - DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n", - cur-1, res->start - 1, cur, res->end + 1); - hose->mem_resources[cur].name = np->full_name; - hose->mem_resources[cur].flags = IORESOURCE_MEM; - hose->mem_resources[cur].start = res->end + 1; - hose->mem_resources[cur].end = hose->mem_resources[cur-1].end; - hose->mem_resources[cur-1].end = res->start - 1; - } -} - -static void __init pmac_process_bridge_OF_ranges(struct pci_controller *hose, - struct device_node *dev, int primary) -{ - static unsigned int static_lc_ranges[2024]; - unsigned int *dt_ranges, *lc_ranges, *ranges, *prev; - unsigned int size; - int rlen = 0, orig_rlen; - int memno = 0; - struct resource *res; - int np, na = prom_n_addr_cells(dev); - - np = na + 5; - - /* First we try to merge ranges to fix a problem with some pmacs - * that can have more than 3 ranges, fortunately using contiguous - * addresses -- BenH - */ - dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen); - if (!dt_ranges) - return; - /* lc_ranges = alloc_bootmem(rlen);*/ - lc_ranges = static_lc_ranges; - if (!lc_ranges) - return; /* what can we do here ? */ - memcpy(lc_ranges, dt_ranges, rlen); - orig_rlen = rlen; - - /* Let's work on a copy of the "ranges" property instead of damaging - * the device-tree image in memory - */ - ranges = lc_ranges; - prev = NULL; - while ((rlen -= np * sizeof(unsigned int)) >= 0) { - if (prev) { - if (prev[0] == ranges[0] && prev[1] == ranges[1] && - (prev[2] + prev[na+4]) == ranges[2] && - (prev[na+2] + prev[na+4]) == ranges[na+2]) { - prev[na+4] += ranges[na+4]; - ranges[0] = 0; - ranges += np; - continue; - } - } - prev = ranges; - ranges += np; - } - - /* - * The ranges property is laid out as an array of elements, - * each of which comprises: - * cells 0 - 2: a PCI address - * cells 3 or 3+4: a CPU physical address - * (size depending on dev->n_addr_cells) - * cells 4+5 or 5+6: the size of the range - */ - ranges = lc_ranges; - rlen = orig_rlen; - while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) { - res = NULL; - size = ranges[na+4]; - switch (ranges[0] >> 24) { - case 1: /* I/O space */ - if (ranges[2] != 0) - break; - hose->io_base_phys = ranges[na+2]; - /* limit I/O space to 16MB */ - if (size > 0x01000000) - size = 0x01000000; - hose->io_base_virt = ioremap(ranges[na+2], size); - if (primary) - isa_io_base = (unsigned long) hose->io_base_virt; - res = &hose->io_resource; - res->flags = IORESOURCE_IO; - res->start = ranges[2]; - break; - case 2: /* memory space */ - memno = 0; - if (ranges[1] == 0 && ranges[2] == 0 - && ranges[na+4] <= (16 << 20)) { - /* 1st 16MB, i.e. ISA memory area */ -#if 0 - if (primary) - isa_mem_base = ranges[na+2]; -#endif - memno = 1; - } - while (memno < 3 && hose->mem_resources[memno].flags) - ++memno; - if (memno == 0) - hose->pci_mem_offset = ranges[na+2] - ranges[2]; - if (memno < 3) { - res = &hose->mem_resources[memno]; - res->flags = IORESOURCE_MEM; - res->start = ranges[na+2]; - } - break; - } - if (res != NULL) { - res->name = dev->full_name; - res->end = res->start + size - 1; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; - } - ranges += np; - } -} - -/* - * We assume that if we have a G3 powermac, we have one bridge called - * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise, - * if we have one or more bandit or chaos bridges, we don't have a MPC106. - */ -static int __init add_bridge(struct device_node *dev) -{ - int len; - struct pci_controller *hose; - char* disp_name; - int *bus_range; - int primary = 1; - struct property *of_prop; - - DBG("Adding PCI host bridge %s\n", dev->full_name); - - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", - dev->full_name); - } - - hose = alloc_bootmem(sizeof(struct pci_controller)); - if (hose == NULL) - return -ENOMEM; - pci_setup_pci_controller(hose); - - hose->arch_data = dev; - hose->first_busno = bus_range ? bus_range[0] : 0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(hose->global_number)); - if (of_prop) { - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(hose->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); - prom_add_property(dev, of_prop); - } - - disp_name = NULL; - if (device_is_compatible(dev, "u3-agp")) { - setup_u3_agp(hose); - disp_name = "U3-AGP"; - primary = 0; - } else if (device_is_compatible(dev, "u3-ht")) { - setup_u3_ht(hose); - disp_name = "U3-HT"; - primary = 1; - } - printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", - disp_name, hose->first_busno, hose->last_busno); - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pmac_process_bridge_OF_ranges(hose, dev, primary); - - /* Fixup "bus-range" OF property */ - fixup_bus_range(dev); - - return 0; -} - -/* - * We use our own read_irq_line here because PCI_INTERRUPT_PIN is - * crap on some of Apple ASICs. We unconditionally use the Open Firmware - * interrupt number as this is always right. - */ -static int pmac_pci_read_irq_line(struct pci_dev *pci_dev) -{ - struct device_node *node; - - node = pci_device_to_OF_node(pci_dev); - if (node == NULL) - return -1; - if (node->n_intrs == 0) - return -1; - pci_dev->irq = node->intrs[0].line; - pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq); - - return 0; -} - -void __init pmac_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - - for_each_pci_dev(dev) - pmac_pci_read_irq_line(dev); -} - -static void __init pmac_fixup_phb_resources(void) -{ - struct pci_controller *hose, *tmp; - - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base; - hose->io_resource.start += offset; - hose->io_resource.end += offset; - printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n", - hose->global_number, - hose->io_resource.start, hose->io_resource.end); - } -} - -void __init pmac_pci_init(void) -{ - struct device_node *np, *root; - struct device_node *ht = NULL; - - /* Probe root PCI hosts, that is on U3 the AGP host and the - * HyperTransport host. That one is actually "kept" around - * and actually added last as it's resource management relies - * on the AGP resources to have been setup first - */ - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n"); - return; - } - for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { - if (np->name == NULL) - continue; - if (strcmp(np->name, "pci") == 0) { - if (add_bridge(np) == 0) - of_node_get(np); - } - if (strcmp(np->name, "ht") == 0) { - of_node_get(np); - ht = np; - } - } - of_node_put(root); - - /* Now setup the HyperTransport host if we found any - */ - if (ht && add_bridge(ht) != 0) - of_node_put(ht); - - /* Fixup the IO resources on our host bridges as the common code - * does it only for childs of the host bridges - */ - pmac_fixup_phb_resources(); - - /* Setup the linkage between OF nodes and PHBs */ - pci_devs_phb_init(); - - /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We - * assume there is no P2P bridge on the AGP bus, which should be a - * safe assumptions hopefully. - */ - if (u3_agp) { - struct device_node *np = u3_agp->arch_data; - PCI_DN(np)->busno = 0xf0; - for (np = np->child; np; np = np->sibling) - PCI_DN(np)->busno = 0xf0; - } - - pmac_check_ht_link(); - - /* Tell pci.c to not use the common resource allocation mecanism */ - pci_probe_only = 1; - - /* Allow all IO */ - io_page_mask = -1; -} - -/* - * Disable second function on K2-SATA, it's broken - * and disable IO BARs on first one - */ -static void fixup_k2_sata(struct pci_dev* dev) -{ - int i; - u16 cmd; - - if (PCI_FUNC(dev->devfn) > 0) { - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); - pci_write_config_word(dev, PCI_COMMAND, cmd); - for (i = 0; i < 6; i++) { - dev->resource[i].start = dev->resource[i].end = 0; - dev->resource[i].flags = 0; - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); - } - } else { - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~PCI_COMMAND_IO; - pci_write_config_word(dev, PCI_COMMAND, cmd); - for (i = 0; i < 5; i++) { - dev->resource[i].start = dev->resource[i].end = 0; - dev->resource[i].flags = 0; - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata); - diff --git a/arch/ppc64/kernel/pmac_setup.c b/arch/ppc64/kernel/pmac_setup.c deleted file mode 100644 index c3ea73df93..0000000000 --- a/arch/ppc64/kernel/pmac_setup.c +++ /dev/null @@ -1,476 +0,0 @@ -/* - * arch/ppc/platforms/setup.c - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Adapted for Power Macintosh by Paul Mackerras - * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) - * - * Derived from "arch/alpha/kernel/setup.c" - * Copyright (C) 1995 Linus Torvalds - * - * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -/* - * bootup setup stuff.. - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "pmac.h" - -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -static int current_root_goodness = -1; -#define DEFAULT_ROOT_DEVICE Root_SDA1 /* sda1 - slightly silly choice */ - -extern int powersave_nap; -int sccdbg; - -sys_ctrler_t sys_ctrler; -EXPORT_SYMBOL(sys_ctrler); - -#ifdef CONFIG_PMAC_SMU -unsigned long smu_cmdbuf_abs; -EXPORT_SYMBOL(smu_cmdbuf_abs); -#endif - -extern void udbg_init_scc(struct device_node *np); - -static void pmac_show_cpuinfo(struct seq_file *m) -{ - struct device_node *np; - char *pp; - int plen; - char* mbname; - int mbmodel = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, - PMAC_MB_INFO_MODEL, 0); - unsigned int mbflags = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, - PMAC_MB_INFO_FLAGS, 0); - - if (pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, PMAC_MB_INFO_NAME, - (long)&mbname) != 0) - mbname = "Unknown"; - - /* find motherboard type */ - seq_printf(m, "machine\t\t: "); - np = find_devices("device-tree"); - if (np != NULL) { - pp = (char *) get_property(np, "model", NULL); - if (pp != NULL) - seq_printf(m, "%s\n", pp); - else - seq_printf(m, "PowerMac\n"); - pp = (char *) get_property(np, "compatible", &plen); - if (pp != NULL) { - seq_printf(m, "motherboard\t:"); - while (plen > 0) { - int l = strlen(pp) + 1; - seq_printf(m, " %s", pp); - plen -= l; - pp += l; - } - seq_printf(m, "\n"); - } - } else - seq_printf(m, "PowerMac\n"); - - /* print parsed model */ - seq_printf(m, "detected as\t: %d (%s)\n", mbmodel, mbname); - seq_printf(m, "pmac flags\t: %08x\n", mbflags); - - /* Indicate newworld */ - seq_printf(m, "pmac-generation\t: NewWorld\n"); -} - - -static void __init pmac_setup_arch(void) -{ - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000; - - /* Probe motherboard chipset */ - pmac_feature_init(); -#if 0 - /* Lock-enable the SCC channel used for debug */ - if (sccdbg) { - np = of_find_node_by_name(NULL, "escc"); - if (np) - pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, - PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1); - } -#endif - /* We can NAP */ - powersave_nap = 1; - -#ifdef CONFIG_ADB_PMU - /* Initialize the PMU if any */ - find_via_pmu(); -#endif -#ifdef CONFIG_PMAC_SMU - /* Initialize the SMU if any */ - smu_init(); -#endif - - /* Init NVRAM access */ - pmac_nvram_init(); - - /* Setup SMP callback */ -#ifdef CONFIG_SMP - pmac_setup_smp(); -#endif - - /* Lookup PCI hosts */ - pmac_pci_init(); - -#ifdef CONFIG_DUMMY_CONSOLE - conswitchp = &dummy_con; -#endif - - printk(KERN_INFO "Using native/NAP idle loop\n"); -} - -#ifdef CONFIG_SCSI -void note_scsi_host(struct device_node *node, void *host) -{ - /* Obsolete */ -} -#endif - - -static int initializing = 1; - -static int pmac_late_init(void) -{ - initializing = 0; - return 0; -} - -late_initcall(pmac_late_init); - -/* can't be __init - can be called whenever a disk is first accessed */ -void note_bootable_part(dev_t dev, int part, int goodness) -{ - extern dev_t boot_dev; - char *p; - - if (!initializing) - return; - if ((goodness <= current_root_goodness) && - ROOT_DEV != DEFAULT_ROOT_DEVICE) - return; - p = strstr(saved_command_line, "root="); - if (p != NULL && (p == saved_command_line || p[-1] == ' ')) - return; - - if (!boot_dev || dev == boot_dev) { - ROOT_DEV = dev + part; - boot_dev = 0; - current_root_goodness = goodness; - } -} - -static void pmac_restart(char *cmd) -{ - switch(sys_ctrler) { -#ifdef CONFIG_ADB_PMU - case SYS_CTRLER_PMU: - pmu_restart(); - break; -#endif - -#ifdef CONFIG_PMAC_SMU - case SYS_CTRLER_SMU: - smu_restart(); - break; -#endif - default: - ; - } -} - -static void pmac_power_off(void) -{ - switch(sys_ctrler) { -#ifdef CONFIG_ADB_PMU - case SYS_CTRLER_PMU: - pmu_shutdown(); - break; -#endif -#ifdef CONFIG_PMAC_SMU - case SYS_CTRLER_SMU: - smu_shutdown(); - break; -#endif - default: - ; - } -} - -static void pmac_halt(void) -{ - pmac_power_off(); -} - -/* - * Early initialization. - */ -static void __init pmac_init_early(void) -{ - DBG(" -> pmac_init_early\n"); - - /* Initialize hash table, from now on, we can take hash faults - * and call ioremap - */ - hpte_init_native(); - - /* Init SCC */ - if (strstr(cmd_line, "sccdbg")) { - sccdbg = 1; - udbg_init_scc(NULL); - } - - /* Setup interrupt mapping options */ - ppc64_interrupt_controller = IC_OPEN_PIC; - - iommu_init_early_u3(); - - DBG(" <- pmac_init_early\n"); -} - -static int pmac_u3_cascade(struct pt_regs *regs, void *data) -{ - return mpic_get_one_irq((struct mpic *)data, regs); -} - -static __init void pmac_init_IRQ(void) -{ - struct device_node *irqctrler = NULL; - struct device_node *irqctrler2 = NULL; - struct device_node *np = NULL; - struct mpic *mpic1, *mpic2; - - /* We first try to detect Apple's new Core99 chipset, since mac-io - * is quite different on those machines and contains an IBM MPIC2. - */ - while ((np = of_find_node_by_type(np, "open-pic")) != NULL) { - struct device_node *parent = of_get_parent(np); - if (parent && !strcmp(parent->name, "u3")) - irqctrler2 = of_node_get(np); - else - irqctrler = of_node_get(np); - of_node_put(parent); - } - if (irqctrler != NULL && irqctrler->n_addrs > 0) { - unsigned char senses[128]; - - printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n", - (unsigned int)irqctrler->addrs[0].address); - - prom_get_irq_senses(senses, 0, 128); - mpic1 = mpic_alloc(irqctrler->addrs[0].address, - MPIC_PRIMARY | MPIC_WANTS_RESET, - 0, 0, 128, 256, senses, 128, " K2-MPIC "); - BUG_ON(mpic1 == NULL); - mpic_init(mpic1); - - if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 && - irqctrler2->n_addrs > 0) { - printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n", - (u32)irqctrler2->addrs[0].address, - irqctrler2->intrs[0].line); - - pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0); - prom_get_irq_senses(senses, 128, 128 + 128); - - /* We don't need to set MPIC_BROKEN_U3 here since we don't have - * hypertransport interrupts routed to it - */ - mpic2 = mpic_alloc(irqctrler2->addrs[0].address, - MPIC_BIG_ENDIAN | MPIC_WANTS_RESET, - 0, 128, 128, 0, senses, 128, " U3-MPIC "); - BUG_ON(mpic2 == NULL); - mpic_init(mpic2); - mpic_setup_cascade(irqctrler2->intrs[0].line, - pmac_u3_cascade, mpic2); - } - } - of_node_put(irqctrler); - of_node_put(irqctrler2); -} - -static void __init pmac_progress(char *s, unsigned short hex) -{ - if (sccdbg) { - udbg_puts(s); - udbg_puts("\n"); - } -#ifdef CONFIG_BOOTX_TEXT - else if (boot_text_mapped) { - btext_drawstring(s); - btext_drawstring("\n"); - } -#endif /* CONFIG_BOOTX_TEXT */ -} - -/* - * pmac has no legacy IO, anything calling this function has to - * fail or bad things will happen - */ -static int pmac_check_legacy_ioport(unsigned int baseport) -{ - return -ENODEV; -} - -static int __init pmac_declare_of_platform_devices(void) -{ - struct device_node *np, *npp; - - npp = of_find_node_by_name(NULL, "u3"); - if (npp) { - for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) { - if (strncmp(np->name, "i2c", 3) == 0) { - of_platform_device_create(np, "u3-i2c", NULL); - of_node_put(np); - break; - } - } - of_node_put(npp); - } - npp = of_find_node_by_type(NULL, "smu"); - if (npp) { - of_platform_device_create(npp, "smu", NULL); - of_node_put(npp); - } - - return 0; -} - -device_initcall(pmac_declare_of_platform_devices); - -/* - * Called very early, MMU is off, device-tree isn't unflattened - */ -static int __init pmac_probe(int platform) -{ - if (platform != PLATFORM_POWERMAC) - return 0; - /* - * On U3, the DART (iommu) must be allocated now since it - * has an impact on htab_initialize (due to the large page it - * occupies having to be broken up so the DART itself is not - * part of the cacheable linar mapping - */ - alloc_u3_dart_table(); - -#ifdef CONFIG_PMAC_SMU - /* - * SMU based G5s need some memory below 2Gb, at least the current - * driver needs that. We have to allocate it now. We allocate 4k - * (1 small page) for now. - */ - smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL); -#endif /* CONFIG_PMAC_SMU */ - - return 1; -} - -static int pmac_probe_mode(struct pci_bus *bus) -{ - struct device_node *node = bus->sysdata; - - /* We need to use normal PCI probing for the AGP bus, - since the device for the AGP bridge isn't in the tree. */ - if (bus->self == NULL && device_is_compatible(node, "u3-agp")) - return PCI_PROBE_NORMAL; - - return PCI_PROBE_DEVTREE; -} - -struct machdep_calls __initdata pmac_md = { -#ifdef CONFIG_HOTPLUG_CPU - .cpu_die = generic_mach_cpu_die, -#endif - .probe = pmac_probe, - .setup_arch = pmac_setup_arch, - .init_early = pmac_init_early, - .show_cpuinfo = pmac_show_cpuinfo, - .init_IRQ = pmac_init_IRQ, - .get_irq = mpic_get_irq, - .pcibios_fixup = pmac_pcibios_fixup, - .pci_probe_mode = pmac_probe_mode, - .restart = pmac_restart, - .power_off = pmac_power_off, - .halt = pmac_halt, - .get_boot_time = pmac_get_boot_time, - .set_rtc_time = pmac_set_rtc_time, - .get_rtc_time = pmac_get_rtc_time, - .calibrate_decr = pmac_calibrate_decr, - .feature_call = pmac_do_feature_call, - .progress = pmac_progress, - .check_legacy_ioport = pmac_check_legacy_ioport, - .idle_loop = native_idle, - .enable_pmcs = power4_enable_pmcs, -}; diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c deleted file mode 100644 index 83c2f8dc1e..0000000000 --- a/arch/ppc64/kernel/pmac_smp.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * SMP support for power macintosh. - * - * We support both the old "powersurge" SMP architecture - * and the current Core99 (G4 PowerMac) machines. - * - * Note that we don't support the very first rev. of - * Apple/DayStar 2 CPUs board, the one with the funky - * watchdog. Hopefully, none of these should be there except - * maybe internally to Apple. I should probably still add some - * code to detect this card though and disable SMP. --BenH. - * - * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net) - * and Ben Herrenschmidt . - * - * Support for DayStar quad CPU cards - * Copyright (C) XLR8, Inc. 1994-2000 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -extern void __secondary_start_pmac_0(void); - -extern struct smp_ops_t *smp_ops; - -static void (*pmac_tb_freeze)(int freeze); -static struct device_node *pmac_tb_clock_chip_host; -static u8 pmac_tb_pulsar_addr; -static DEFINE_SPINLOCK(timebase_lock); -static unsigned long timebase; - -static void smp_core99_cypress_tb_freeze(int freeze) -{ - u8 data; - int rc; - - /* Strangely, the device-tree says address is 0xd2, but darwin - * accesses 0xd0 ... - */ - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd0 | pmac_low_i2c_read, - 0x81, &data, 1); - if (rc != 0) - goto bail; - - data = (data & 0xf3) | (freeze ? 0x00 : 0x0c); - - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd0 | pmac_low_i2c_write, - 0x81, &data, 1); - - bail: - if (rc != 0) { - printk("Cypress Timebase %s rc: %d\n", - freeze ? "freeze" : "unfreeze", rc); - panic("Timebase freeze failed !\n"); - } -} - -static void smp_core99_pulsar_tb_freeze(int freeze) -{ - u8 data; - int rc; - - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - pmac_tb_pulsar_addr | pmac_low_i2c_read, - 0x2e, &data, 1); - if (rc != 0) - goto bail; - - data = (data & 0x88) | (freeze ? 0x11 : 0x22); - - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - pmac_tb_pulsar_addr | pmac_low_i2c_write, - 0x2e, &data, 1); - bail: - if (rc != 0) { - printk(KERN_ERR "Pulsar Timebase %s rc: %d\n", - freeze ? "freeze" : "unfreeze", rc); - panic("Timebase freeze failed !\n"); - } -} - - -static void smp_core99_give_timebase(void) -{ - /* Open i2c bus for synchronous access */ - if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0)) - panic("Can't open i2c for TB sync !\n"); - - spin_lock(&timebase_lock); - (*pmac_tb_freeze)(1); - mb(); - timebase = get_tb(); - spin_unlock(&timebase_lock); - - while (timebase) - barrier(); - - spin_lock(&timebase_lock); - (*pmac_tb_freeze)(0); - spin_unlock(&timebase_lock); - - /* Close i2c bus */ - pmac_low_i2c_close(pmac_tb_clock_chip_host); -} - - -static void __devinit smp_core99_take_timebase(void) -{ - while (!timebase) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase >> 32, timebase & 0xffffffff); - timebase = 0; - spin_unlock(&timebase_lock); -} - - -static int __init smp_core99_probe(void) -{ - struct device_node *cpus; - struct device_node *cc; - int ncpus = 0; - - /* Maybe use systemconfiguration here ? */ - if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345); - - /* Count CPUs in the device-tree */ - for (cpus = NULL; (cpus = of_find_node_by_type(cpus, "cpu")) != NULL;) - ++ncpus; - - printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus); - - /* Nothing more to do if less than 2 of them */ - if (ncpus <= 1) - return 1; - - /* HW sync only on these platforms */ - if (!machine_is_compatible("PowerMac7,2") && - !machine_is_compatible("PowerMac7,3") && - !machine_is_compatible("RackMac3,1")) - goto nohwsync; - - /* Look for the clock chip */ - for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) { - struct device_node *p = of_get_parent(cc); - u32 *reg; - int ok; - ok = p && device_is_compatible(p, "uni-n-i2c"); - if (!ok) - goto next; - reg = (u32 *)get_property(cc, "reg", NULL); - if (reg == NULL) - goto next; - switch (*reg) { - case 0xd2: - if (device_is_compatible(cc, "pulsar-legacy-slewing")) { - pmac_tb_freeze = smp_core99_pulsar_tb_freeze; - pmac_tb_pulsar_addr = 0xd2; - printk(KERN_INFO "Timebase clock is Pulsar chip\n"); - } else if (device_is_compatible(cc, "cy28508")) { - pmac_tb_freeze = smp_core99_cypress_tb_freeze; - printk(KERN_INFO "Timebase clock is Cypress chip\n"); - } - break; - case 0xd4: - pmac_tb_freeze = smp_core99_pulsar_tb_freeze; - pmac_tb_pulsar_addr = 0xd4; - printk(KERN_INFO "Timebase clock is Pulsar chip\n"); - break; - } - if (pmac_tb_freeze != NULL) { - pmac_tb_clock_chip_host = p; - smp_ops->give_timebase = smp_core99_give_timebase; - smp_ops->take_timebase = smp_core99_take_timebase; - of_node_put(cc); - of_node_put(p); - break; - } - next: - of_node_put(p); - } - - nohwsync: - mpic_request_ipis(); - - return ncpus; -} - -static void __init smp_core99_kick_cpu(int nr) -{ - unsigned int save_vector, j; - unsigned long new_vector; - unsigned long flags; - volatile unsigned int *vector - = ((volatile unsigned int *)(KERNELBASE+0x100)); - - if (nr < 1 || nr > 3) - return; - if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346); - - local_irq_save(flags); - local_irq_disable(); - - /* Save reset vector */ - save_vector = *vector; - - /* Setup fake reset vector that does - * b __secondary_start_pmac_0 + nr*8 - KERNELBASE - */ - new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8; - *vector = 0x48000002 + (new_vector - KERNELBASE); - - /* flush data cache and inval instruction cache */ - flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); - - /* Put some life in our friend */ - pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0); - paca[nr].cpu_start = 1; - - /* FIXME: We wait a bit for the CPU to take the exception, I should - * instead wait for the entry code to set something for me. Well, - * ideally, all that crap will be done in prom.c and the CPU left - * in a RAM-based wait loop like CHRP. - */ - for (j = 1; j < 1000000; j++) - mb(); - - /* Restore our exception vector */ - *vector = save_vector; - flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); - - local_irq_restore(flags); - if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347); -} - -static void __init smp_core99_setup_cpu(int cpu_nr) -{ - /* Setup MPIC */ - mpic_setup_this_cpu(); - - if (cpu_nr == 0) { - extern void g5_phy_disable_cpu1(void); - - /* If we didn't start the second CPU, we must take - * it off the bus - */ - if (num_online_cpus() < 2) - g5_phy_disable_cpu1(); - if (ppc_md.progress) ppc_md.progress("smp_core99_setup_cpu 0 done", 0x349); - } -} - -struct smp_ops_t core99_smp_ops = { - .message_pass = smp_mpic_message_pass, - .probe = smp_core99_probe, - .kick_cpu = smp_core99_kick_cpu, - .setup_cpu = smp_core99_setup_cpu, - .give_timebase = smp_generic_give_timebase, - .take_timebase = smp_generic_take_timebase, -}; - -void __init pmac_setup_smp(void) -{ - smp_ops = &core99_smp_ops; -#ifdef CONFIG_HOTPLUG_CPU - smp_ops->cpu_enable = generic_cpu_enable; - smp_ops->cpu_disable = generic_cpu_disable; - smp_ops->cpu_die = generic_cpu_die; -#endif -} diff --git a/arch/ppc64/kernel/pmac_time.c b/arch/ppc64/kernel/pmac_time.c deleted file mode 100644 index 928bf213ec..0000000000 --- a/arch/ppc64/kernel/pmac_time.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * Support for periodic interrupts (100 per second) and for getting - * the current time from the RTC on Power Macintoshes. - * - * We use the decrementer register for our periodic interrupts. - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - * Copyright (C) 2003-2005 Benjamin Herrenschmidt. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#undef DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -/* Apparently the RTC stores seconds since 1 Jan 1904 */ -#define RTC_OFFSET 2082844800 - -/* - * Calibrate the decrementer frequency with the VIA timer 1. - */ -#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */ - -extern struct timezone sys_tz; -extern void to_tm(int tim, struct rtc_time * tm); - -void pmac_get_rtc_time(struct rtc_time *tm) -{ - switch(sys_ctrler) { -#ifdef CONFIG_ADB_PMU - case SYS_CTRLER_PMU: { - /* TODO: Move that to a function in the PMU driver */ - struct adb_request req; - unsigned int now; - - if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0) - return; - pmu_wait_complete(&req); - if (req.reply_len != 4) - printk(KERN_ERR "pmac_get_rtc_time: PMU returned a %d" - " bytes reply\n", req.reply_len); - now = (req.reply[0] << 24) + (req.reply[1] << 16) - + (req.reply[2] << 8) + req.reply[3]; - DBG("get: %u -> %u\n", (int)now, (int)(now - RTC_OFFSET)); - now -= RTC_OFFSET; - - to_tm(now, tm); - tm->tm_year -= 1900; - tm->tm_mon -= 1; - - DBG("-> tm_mday: %d, tm_mon: %d, tm_year: %d, %d:%02d:%02d\n", - tm->tm_mday, tm->tm_mon, tm->tm_year, - tm->tm_hour, tm->tm_min, tm->tm_sec); - break; - } -#endif /* CONFIG_ADB_PMU */ - -#ifdef CONFIG_PMAC_SMU - case SYS_CTRLER_SMU: - smu_get_rtc_time(tm, 1); - break; -#endif /* CONFIG_PMAC_SMU */ - default: - ; - } -} - -int pmac_set_rtc_time(struct rtc_time *tm) -{ - switch(sys_ctrler) { -#ifdef CONFIG_ADB_PMU - case SYS_CTRLER_PMU: { - /* TODO: Move that to a function in the PMU driver */ - struct adb_request req; - unsigned int nowtime; - - DBG("set: tm_mday: %d, tm_mon: %d, tm_year: %d," - " %d:%02d:%02d\n", - tm->tm_mday, tm->tm_mon, tm->tm_year, - tm->tm_hour, tm->tm_min, tm->tm_sec); - - nowtime = mktime(tm->tm_year + 1900, tm->tm_mon + 1, - tm->tm_mday, tm->tm_hour, tm->tm_min, - tm->tm_sec); - - DBG("-> %u -> %u\n", (int)nowtime, - (int)(nowtime + RTC_OFFSET)); - nowtime += RTC_OFFSET; - - if (pmu_request(&req, NULL, 5, PMU_SET_RTC, - nowtime >> 24, nowtime >> 16, - nowtime >> 8, nowtime) < 0) - return -ENXIO; - pmu_wait_complete(&req); - if (req.reply_len != 0) - printk(KERN_ERR "pmac_set_rtc_time: PMU returned a %d" - " bytes reply\n", req.reply_len); - return 0; - } -#endif /* CONFIG_ADB_PMU */ - -#ifdef CONFIG_PMAC_SMU - case SYS_CTRLER_SMU: - return smu_set_rtc_time(tm, 1); -#endif /* CONFIG_PMAC_SMU */ - default: - return -ENODEV; - } -} - -unsigned long __init pmac_get_boot_time(void) -{ - struct rtc_time tm; - - pmac_get_rtc_time(&tm); - return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); -} - -/* - * Query the OF and get the decr frequency. - * FIXME: merge this with generic_calibrate_decr - */ -void __init pmac_calibrate_decr(void) -{ - struct device_node *cpu; - unsigned int *fp; - - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - cpu = find_type_devices("cpu"); - if (cpu == 0) - panic("can't find cpu node in time_init"); - fp = (unsigned int *) get_property(cpu, "timebase-frequency", NULL); - if (fp == 0) - panic("can't get cpu timebase frequency"); - ppc_tb_freq = *fp; - - fp = (unsigned int *)get_property(cpu, "clock-frequency", NULL); - if (fp == 0) - panic("can't get cpu processor frequency"); - ppc_proc_freq = *fp; -} -