From: Stephen Hemminger Date: Thu, 24 Jan 2008 03:16:04 +0000 (-0800) Subject: sky2: fix Wake On Lan interaction with BIOS X-Git-Tag: v2.6.25-rc1~1065^2~15 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=82637e808478087ce861129745fa60cc37e7929d;p=linux-2.6 sky2: fix Wake On Lan interaction with BIOS This patch disables config mode access after clearing PCI settings. Some BIOS's seem to not do WOL if config bit still set. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=9721 Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik Signed-off-by: David S. Miller --- diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 6675b2256c..dc062367a1 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -623,6 +623,7 @@ static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff) static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA }; + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); /* Turn on/off phy power saving */ if (onoff) @@ -634,7 +635,8 @@ static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff) reg1 |= coma_mode[port]; sky2_pci_write32(hw, PCI_DEV_REG1, reg1); - reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + sky2_pci_read32(hw, PCI_DEV_REG1); udelay(100); } @@ -2437,6 +2439,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { u16 pci_err; + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); pci_err = sky2_pci_read16(hw, PCI_STATUS); if (net_ratelimit()) dev_err(&pdev->dev, "PCI hardware error (0x%x)\n", @@ -2444,12 +2447,14 @@ static void sky2_hw_intr(struct sky2_hw *hw) sky2_pci_write16(hw, PCI_STATUS, pci_err | PCI_STATUS_ERROR_BITS); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } if (status & Y2_IS_PCI_EXP) { /* PCI-Express uncorrectable Error occurred */ u32 err; + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, 0xfffffffful); @@ -2457,6 +2462,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err); sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } if (status & Y2_HWE_L1_MASK) @@ -2832,6 +2838,7 @@ static void sky2_reset(struct sky2_hw *hw) } sky2_power_on(hw); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); for (i = 0; i < hw->ports; i++) { sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);