From: Michael Gernoth Date: Tue, 26 Jul 2005 18:21:47 +0000 (+0100) Subject: [PATCH] ARM: 2830/1: Fix Jornada 720 PCMCIA-support X-Git-Tag: v2.6.13-rc4~38^2~1 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=821ca478867433502fc614b4be83e0362cd7e67e;p=linux-2.6 [PATCH] ARM: 2830/1: Fix Jornada 720 PCMCIA-support Patch from Michael Gernoth This patch lets the Jornada 720 PCMCIA-driver compile again. The resulting driver has been tested on a Jornada with a CF-card, which was mounted and accessed successfully. Signed-off-by: Michael Gernoth Signed-off-by: Russell King --- diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c index 0a387106ac..7a87298bae 100644 --- a/drivers/pcmcia/sa1100_jornada720.c +++ b/drivers/pcmcia/sa1100_jornada720.c @@ -30,20 +30,9 @@ static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt) */ GRER |= 0x00000002; /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */ - PA_DDR = 0; - PA_DWR = 0; - PA_SDR = 0; - PA_SSR = 0; - - PB_DDR = 0; - PB_DWR = 0x01; - PB_SDR = 0; - PB_SSR = 0; - - PC_DDR = 0x88; - PC_DWR = 0x20; - PC_SDR = 0; - PC_SSR = 0; + sa1111_set_io_dir(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); + sa1111_set_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); + sa1111_set_sleep_io(SA1111_DEV(skt->dev), GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); return sa1111_pcmcia_hw_init(skt); } @@ -95,7 +84,7 @@ printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__, unsigned long flags; local_irq_save(flags); - PA_DWR = (PA_DWR & ~pa_dwr_mask) | pa_dwr_set; + sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set); local_irq_restore(flags); }