From: Steve Wise <swise@opengridcomputing.com>
Date: Thu, 24 Jan 2008 22:30:16 +0000 (-0600)
Subject: RDMA/cxgb3: Fix the T3A workaround checks
X-Git-Tag: v2.6.25-rc1~1234^2
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8176d297c73a06e6076c9c31f6404047567f6324;p=linux-2.6

RDMA/cxgb3: Fix the T3A workaround checks

Correctly work around T3A issues by checking "hwtype != T3A" instead of
"hwtype == T3B".  This will be needed for new hardware types.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---

diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index 26b8c0e1cf..03c5ff6288 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -179,7 +179,7 @@ int cxio_create_cq(struct cxio_rdev *rdev_p, struct t3_cq *cq)
 	setup.size = 1UL << cq->size_log2;
 	setup.credits = 65535;
 	setup.credit_thres = 1;
-	if (rdev_p->t3cdev_p->type == T3B)
+	if (rdev_p->t3cdev_p->type != T3A)
 		setup.ovfl_mode = 0;
 	else
 		setup.ovfl_mode = 1;
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index 20ba372dd1..f8cb0fe748 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -1118,7 +1118,7 @@ static int act_open_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx)
 	     status2errno(rpl->status));
 	connect_reply_upcall(ep, status2errno(rpl->status));
 	state_set(&ep->com, DEAD);
-	if (ep->com.tdev->type == T3B && act_open_has_tid(rpl->status))
+	if (ep->com.tdev->type != T3A && act_open_has_tid(rpl->status))
 		release_tid(ep->com.tdev, GET_TID(rpl), NULL);
 	cxgb3_free_atid(ep->com.tdev, ep->atid);
 	dst_release(ep->dst);
@@ -1249,7 +1249,7 @@ static void reject_cr(struct t3cdev *tdev, u32 hwtid, __be32 peer_ip,
 	skb_trim(skb, sizeof(struct cpl_tid_release));
 	skb_get(skb);
 
-	if (tdev->type == T3B)
+	if (tdev->type != T3A)
 		release_tid(tdev, hwtid, skb);
 	else {
 		struct cpl_pass_accept_rpl *rpl;
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index 69b1204e05..df1838f8f9 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -646,7 +646,7 @@ static struct ib_mr *iwch_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
 	if (err)
 		goto err;
 
-	if (udata && t3b_device(rhp)) {
+	if (udata && !t3a_device(rhp)) {
 		uresp.pbl_addr = (mhp->attr.pbl_addr -
 	                         rhp->rdev.rnic_info.pbl_base) >> 3;
 		PDBG("%s user resp pbl_addr 0x%x\n", __FUNCTION__,