From: Michael Chan Date: Tue, 15 Jul 2008 05:39:03 +0000 (-0700) Subject: bnx2: Allow flexible VLAN tag settings. X-Git-Tag: v2.6.27-rc1~969^2~142 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=7c62e83beb1446d690ed921beddb0dcf34c9baa9;p=linux-2.6 bnx2: Allow flexible VLAN tag settings. Negotiate with boot code and ASF firmware to see if it can support keeping VLAN tags in the RX packets. If supported by firmware, the VLAN tag will be kept in the RX packet unless VLAN acceleration is registered. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 4dfd43917a..2d0213ed6e 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -4255,35 +4255,43 @@ nvram_write_end: } static void -bnx2_init_remote_phy(struct bnx2 *bp) +bnx2_init_fw_cap(struct bnx2 *bp) { - u32 val; + u32 val, sig = 0; bp->phy_flags &= ~BNX2_PHY_FLAG_REMOTE_PHY_CAP; - if (!(bp->phy_flags & BNX2_PHY_FLAG_SERDES)) - return; + bp->flags &= ~BNX2_FLAG_CAN_KEEP_VLAN; + + if (!(bp->flags & BNX2_FLAG_ASF_ENABLE)) + bp->flags |= BNX2_FLAG_CAN_KEEP_VLAN; val = bnx2_shmem_rd(bp, BNX2_FW_CAP_MB); if ((val & BNX2_FW_CAP_SIGNATURE_MASK) != BNX2_FW_CAP_SIGNATURE) return; - if (val & BNX2_FW_CAP_REMOTE_PHY_CAPABLE) { + if ((val & BNX2_FW_CAP_CAN_KEEP_VLAN) == BNX2_FW_CAP_CAN_KEEP_VLAN) { + bp->flags |= BNX2_FLAG_CAN_KEEP_VLAN; + sig |= BNX2_DRV_ACK_CAP_SIGNATURE | BNX2_FW_CAP_CAN_KEEP_VLAN; + } + + if ((bp->phy_flags & BNX2_PHY_FLAG_SERDES) && + (val & BNX2_FW_CAP_REMOTE_PHY_CAPABLE)) { + u32 link; + bp->phy_flags |= BNX2_PHY_FLAG_REMOTE_PHY_CAP; - val = bnx2_shmem_rd(bp, BNX2_LINK_STATUS); - if (val & BNX2_LINK_STATUS_SERDES_LINK) + link = bnx2_shmem_rd(bp, BNX2_LINK_STATUS); + if (link & BNX2_LINK_STATUS_SERDES_LINK) bp->phy_port = PORT_FIBRE; else bp->phy_port = PORT_TP; - if (netif_running(bp->dev)) { - u32 sig; - - sig = BNX2_DRV_ACK_CAP_SIGNATURE | - BNX2_FW_CAP_REMOTE_PHY_CAPABLE; - bnx2_shmem_wr(bp, BNX2_DRV_ACK_CAP_MB, sig); - } + sig |= BNX2_DRV_ACK_CAP_SIGNATURE | + BNX2_FW_CAP_REMOTE_PHY_CAPABLE; } + + if (netif_running(bp->dev) && sig) + bnx2_shmem_wr(bp, BNX2_DRV_ACK_CAP_MB, sig); } static void @@ -4380,7 +4388,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) spin_lock_bh(&bp->phy_lock); old_port = bp->phy_port; - bnx2_init_remote_phy(bp); + bnx2_init_fw_cap(bp); if ((bp->phy_flags & BNX2_PHY_FLAG_REMOTE_PHY_CAP) && old_port != bp->phy_port) bnx2_set_default_remote_link(bp); @@ -5879,6 +5887,8 @@ bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp) bp->vlgrp = vlgrp; bnx2_set_rx_mode(dev); + if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN) + bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE, 0, 1); bnx2_netif_start(bp); } @@ -7483,8 +7493,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G) bp->phy_flags |= BNX2_PHY_FLAG_2_5G_CAPABLE; } - bnx2_init_remote_phy(bp); - } else if (CHIP_NUM(bp) == CHIP_NUM_5706 || CHIP_NUM(bp) == CHIP_NUM_5708) bp->phy_flags |= BNX2_PHY_FLAG_CRC_FIX; @@ -7493,6 +7501,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) CHIP_REV(bp) == CHIP_REV_Bx)) bp->phy_flags |= BNX2_PHY_FLAG_DIS_EARLY_DAC; + bnx2_init_fw_cap(bp); + if ((CHIP_ID(bp) == CHIP_ID_5708_A0) || (CHIP_ID(bp) == CHIP_ID_5708_B0) || (CHIP_ID(bp) == CHIP_ID_5708_B1)) { diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index efa0ca9a8f..7b882fd9d5 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6670,6 +6670,7 @@ struct bnx2 { #define BNX2_FLAG_USING_MSI_OR_MSIX (BNX2_FLAG_USING_MSI | \ BNX2_FLAG_USING_MSIX) #define BNX2_FLAG_JUMBO_BROKEN 0x00000800 +#define BNX2_FLAG_CAN_KEEP_VLAN 0x00001000 struct bnx2_napi bnx2_napi[BNX2_MAX_MSIX_VEC]; @@ -6951,6 +6952,7 @@ struct fw_info { #define BNX2_DRV_MSG_CODE_DIAG 0x07000000 #define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL 0x09000000 #define BNX2_DRV_MSG_CODE_UNLOAD_LNK_DN 0x0b000000 +#define BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE 0x0d000000 #define BNX2_DRV_MSG_CODE_CMD_SET_LINK 0x10000000 #define BNX2_DRV_MSG_DATA 0x00ff0000 @@ -7279,6 +7281,10 @@ struct fw_info { #define BNX2_FW_CAP_SIGNATURE_MASK 0xffff0000 #define BNX2_FW_CAP_REMOTE_PHY_CAPABLE 0x00000001 #define BNX2_FW_CAP_REMOTE_PHY_PRESENT 0x00000002 +#define BNX2_FW_CAP_MFW_CAN_KEEP_VLAN 0x00000008 +#define BNX2_FW_CAP_BC_CAN_KEEP_VLAN 0x00000010 +#define BNX2_FW_CAP_CAN_KEEP_VLAN (BNX2_FW_CAP_BC_CAN_KEEP_VLAN | \ + BNX2_FW_CAP_MFW_CAN_KEEP_VLAN) #define BNX2_RPHY_SIGNATURE 0x36c #define BNX2_RPHY_LOAD_SIGNATURE 0x5a5a5a5a