From: Russell King Date: Mon, 7 Jan 2008 22:18:30 +0000 (+0000) Subject: [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme X-Git-Tag: v2.6.25-rc1~1175^2^2~15 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=7b5dea12346f98b0624e00ef585246bfec8b0959;p=linux-2.6 [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme Wakeup sources on PXA3 are enabled at two levels. First, the MFP configuration has to be set to enable which edges a specific pin will trigger a wakeup. The pin also has to be routed to a functional unit. Lastly, the functional unit must be enabled as a wakeup source in the appropriate AD*ER registers (AD2D0ER for standby resume.) This doesn't fit well with the IRQ wake scheme - we currently do a best effort conversion from IRQ numbers to functional unit wake enable bits. For instance, there's several USB client related enable bits but there's no corresponding IRQs to determine which you'd want. Conversely, there's a single enable bit covering several functional units. Signed-off-by: Russell King --- diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index fcb2359b38..0b2a15ed39 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -201,6 +202,225 @@ static struct clk pxa3xx_clks[] = { PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev), }; +#ifdef CONFIG_PM +#define SLEEP_SAVE_SIZE 4 + +#define ISRAM_START 0x5c000000 +#define ISRAM_SIZE SZ_256K + +static void __iomem *sram; +static unsigned long wakeup_src; + +static void pxa3xx_cpu_pm_save(unsigned long *sleep_save) +{ + pr_debug("PM: CKENA=%08x CKENB=%08x\n", CKENA, CKENB); + + if (CKENA & (1 << CKEN_USBH)) { + printk(KERN_ERR "PM: USB host clock not stopped?\n"); + CKENA &= ~(1 << CKEN_USBH); + } +// CKENA |= 1 << (CKEN_ISC & 31); + + /* + * Low power modes require the HSIO2 clock to be enabled. + */ + CKENB |= 1 << (CKEN_HSIO2 & 31); +} + +static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save) +{ + CKENB &= ~(1 << (CKEN_HSIO2 & 31)); +} + +/* + * Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic + * memory controller has to be reinitialised, so we place some code + * in the SRAM to perform this function. + * + * We disable FIQs across the standby - otherwise, we might receive a + * FIQ while the SDRAM is unavailable. + */ +static void pxa3xx_cpu_standby(unsigned int pwrmode) +{ + extern const char pm_enter_standby_start[], pm_enter_standby_end[]; + void (*fn)(unsigned int) = (void __force *)(sram + 0x8000); + + memcpy_toio(sram + 0x8000, pm_enter_standby_start, + pm_enter_standby_end - pm_enter_standby_start); + + AD2D0SR = ~0; + AD2D1SR = ~0; + AD2D0ER = wakeup_src; + AD2D1ER = 0; + ASCR = ASCR; + ARSR = ARSR; + + local_fiq_disable(); + fn(pwrmode); + local_fiq_enable(); + + AD2D0ER = 0; + AD2D1ER = 0; + + printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR); +} + +static void pxa3xx_cpu_pm_enter(suspend_state_t state) +{ + /* + * Don't sleep if no wakeup sources are defined + */ + if (wakeup_src == 0) + return; + + switch (state) { + case PM_SUSPEND_STANDBY: + pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2); + break; + + case PM_SUSPEND_MEM: + break; + } +} + +static int pxa3xx_cpu_pm_valid(suspend_state_t state) +{ + return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; +} + +static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = { + .save_size = SLEEP_SAVE_SIZE, + .save = pxa3xx_cpu_pm_save, + .restore = pxa3xx_cpu_pm_restore, + .valid = pxa3xx_cpu_pm_valid, + .enter = pxa3xx_cpu_pm_enter, +}; + +static void __init pxa3xx_init_pm(void) +{ + sram = ioremap(ISRAM_START, ISRAM_SIZE); + if (!sram) { + printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n"); + return; + } + + /* + * Since we copy wakeup code into the SRAM, we need to ensure + * that it is preserved over the low power modes. Note: bit 8 + * is undocumented in the developer manual, but must be set. + */ + AD1R |= ADXR_L2 | ADXR_R0; + AD2R |= ADXR_L2 | ADXR_R0; + AD3R |= ADXR_L2 | ADXR_R0; + + /* + * Clear the resume enable registers. + */ + AD1D0ER = 0; + AD2D0ER = 0; + AD2D1ER = 0; + AD3ER = 0; + + pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns; +} + +static int pxa3xx_set_wake(unsigned int irq, unsigned int on) +{ + unsigned long flags, mask = 0; + + switch (irq) { + case IRQ_SSP3: + mask = ADXER_MFP_WSSP3; + break; + case IRQ_MSL: + mask = ADXER_WMSL0; + break; + case IRQ_USBH2: + case IRQ_USBH1: + mask = ADXER_WUSBH; + break; + case IRQ_KEYPAD: + mask = ADXER_WKP; + break; + case IRQ_AC97: + mask = ADXER_MFP_WAC97; + break; + case IRQ_USIM: + mask = ADXER_WUSIM0; + break; + case IRQ_SSP2: + mask = ADXER_MFP_WSSP2; + break; + case IRQ_I2C: + mask = ADXER_MFP_WI2C; + break; + case IRQ_STUART: + mask = ADXER_MFP_WUART3; + break; + case IRQ_BTUART: + mask = ADXER_MFP_WUART2; + break; + case IRQ_FFUART: + mask = ADXER_MFP_WUART1; + break; + case IRQ_MMC: + mask = ADXER_MFP_WMMC1; + break; + case IRQ_SSP: + mask = ADXER_MFP_WSSP1; + break; + case IRQ_RTCAlrm: + mask = ADXER_WRTC; + break; + case IRQ_SSP4: + mask = ADXER_MFP_WSSP4; + break; + case IRQ_TSI: + mask = ADXER_WTSI; + break; + case IRQ_USIM2: + mask = ADXER_WUSIM1; + break; + case IRQ_MMC2: + mask = ADXER_MFP_WMMC2; + break; + case IRQ_NAND: + mask = ADXER_MFP_WFLASH; + break; + case IRQ_USB2: + mask = ADXER_WUSB2; + break; + case IRQ_WAKEUP0: + mask = ADXER_WEXTWAKE0; + break; + case IRQ_WAKEUP1: + mask = ADXER_WEXTWAKE1; + break; + case IRQ_MMC3: + mask = ADXER_MFP_GEN12; + break; + } + + local_irq_save(flags); + if (on) + wakeup_src |= mask; + else + wakeup_src &= ~mask; + local_irq_restore(flags); + + return 0; +} + +static void pxa3xx_init_irq_pm(void) +{ + pxa_init_irq_set_wake(pxa3xx_set_wake); +} + +#else +static inline void pxa3xx_init_pm(void) {} +static inline void pxa3xx_init_irq_pm(void) {} +#endif + void __init pxa3xx_init_irq(void) { /* enable CP6 access */ @@ -212,6 +432,7 @@ void __init pxa3xx_init_irq(void) pxa_init_irq_low(); pxa_init_irq_high(); pxa_init_irq_gpio(128); + pxa3xx_init_irq_pm(); } /* @@ -241,6 +462,8 @@ static int __init pxa3xx_init(void) if ((ret = pxa_init_dma(32))) return ret; + pxa3xx_init_pm(); + return platform_add_devices(devices, ARRAY_SIZE(devices)); } return 0; diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index 434a6ab0ec..167412e6be 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -32,3 +32,83 @@ ENTRY(pxa_cpu_standby) mov pc, lr #endif + +#ifdef CONFIG_PXA3xx + +#define MDCNFG 0x0000 +#define MDCNFG_DMCEN (1 << 30) +#define DDR_HCAL 0x0060 +#define DDR_HCAL_HCRNG 0x1f +#define DDR_HCAL_HCPROG (1 << 28) +#define DDR_HCAL_HCEN (1 << 31) +#define DMCIER 0x0070 +#define DMCIER_EDLP (1 << 29) +#define DMCISR 0x0078 +#define RCOMP 0x0100 +#define RCOMP_SWEVAL (1 << 31) + +ENTRY(pm_enter_standby_start) + mov r1, #0xf6000000 @ DMEMC_REG_BASE (MDCNFG) + add r1, r1, #0x00100000 + + /* + * Preload the TLB entry for accessing the dynamic memory + * controller registers. Note that page table lookups will + * fail until the dynamic memory controller has been + * reinitialised - and that includes MMU page table walks. + * This also means that only the dynamic memory controller + * can be reliably accessed in the code following standby. + */ + ldr r2, [r1] @ Dummy read MDCNFG + + mcr p14, 0, r0, c7, c0, 0 + .rept 8 + nop + .endr + + ldr r0, [r1, #DDR_HCAL] @ Clear (and wait for) HCEN + bic r0, r0, #DDR_HCAL_HCEN + str r0, [r1, #DDR_HCAL] +1: ldr r0, [r1, #DDR_HCAL] + tst r0, #DDR_HCAL_HCEN + bne 1b + + ldr r0, [r1, #RCOMP] @ Initiate RCOMP + orr r0, r0, #RCOMP_SWEVAL + str r0, [r1, #RCOMP] + + mov r0, #~0 @ Clear interrupts + str r0, [r1, #DMCISR] + + ldr r0, [r1, #DMCIER] @ set DMIER[EDLP] + orr r0, r0, #DMCIER_EDLP + str r0, [r1, #DMCIER] + + ldr r0, [r1, #DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN + bic r0, r0, #DDR_HCAL_HCRNG + orr r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG + str r0, [r1, #DDR_HCAL] + +1: ldr r0, [r1, #DMCISR] + tst r0, #DMCIER_EDLP + beq 1b + + ldr r0, [r1, #MDCNFG] @ set MDCNFG[DMCEN] + orr r0, r0, #MDCNFG_DMCEN + str r0, [r1, #MDCNFG] +1: ldr r0, [r1, #MDCNFG] + tst r0, #MDCNFG_DMCEN + beq 1b + + ldr r0, [r1, #DDR_HCAL] @ set DDR_HCAL[HCRNG] + orr r0, r0, #2 @ HCRNG + str r0, [r1, #DDR_HCAL] + + ldr r0, [r1, #DMCIER] @ Clear the interrupt + bic r0, r0, #0x20000000 + str r0, [r1, #DMCIER] + + mov pc, lr +ENTRY(pm_enter_standby_end) + +#endif diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h index 3900a0ca0b..66d5411975 100644 --- a/include/asm-arm/arch-pxa/pxa3xx-regs.h +++ b/include/asm-arm/arch-pxa/pxa3xx-regs.h @@ -13,6 +13,92 @@ #ifndef __ASM_ARCH_PXA3XX_REGS_H #define __ASM_ARCH_PXA3XX_REGS_H +/* + * Slave Power Managment Unit + */ +#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ +#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ +#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */ +#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */ +#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */ +#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */ +#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */ +#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */ +#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */ +#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */ +#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */ +#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */ +#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */ +#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */ + +/* + * Application Subsystem Configuration bits. + */ +#define ASCR_RDH (1 << 31) +#define ASCR_D1S (1 << 2) +#define ASCR_D2S (1 << 1) +#define ASCR_D3S (1 << 0) + +/* + * Application Reset Status bits. + */ +#define ARSR_GPR (1 << 3) +#define ARSR_LPMR (1 << 2) +#define ARSR_WDT (1 << 1) +#define ARSR_HWR (1 << 0) + +/* + * Application Subsystem Wake-Up bits. + */ +#define ADXER_WRTC (1 << 31) /* RTC */ +#define ADXER_WOST (1 << 30) /* OS Timer */ +#define ADXER_WTSI (1 << 29) /* Touchscreen */ +#define ADXER_WUSBH (1 << 28) /* USB host */ +#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */ +#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/ +#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */ +#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */ +#define ADXER_WKP (1 << 21) /* Keypad */ +#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */ +#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */ +#define ADXER_WOTG (1 << 16) /* USBOTG input */ +#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */ +#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */ +#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */ +#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */ +#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */ +#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */ +#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */ +#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */ +#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */ +#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */ +#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */ +#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */ +#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */ +#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */ +#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */ +#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */ + +/* + * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320. + */ +#define ADXR_L2 (1 << 8) +#define ADXR_R5 (1 << 5) +#define ADXR_R4 (1 << 4) +#define ADXR_R3 (1 << 3) +#define ADXR_R2 (1 << 2) +#define ADXR_R1 (1 << 1) +#define ADXR_R0 (1 << 0) + +/* + * Values for PWRMODE CP15 register + */ +#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */ +#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */ +#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */ +#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */ +#define PXA3xx_PM_S0D0C1 0x01 + /* * Application Subsystem Clock */