From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Tue, 18 Mar 2008 21:47:56 +0000 (+0100)
Subject: [MIPS] IP28: switch to "normal" mode after PROM no longer needed
X-Git-Tag: v2.6.27-rc1~1063^2~34
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=7a2852e49fe2d19296812c0f0f833b0ee3043bbb;p=linux-2.6

[MIPS] IP28: switch to "normal" mode after PROM no longer needed

SGI-IP28 is running in so called slow mode, when kernel is started
from the PROM. PROM calls must be done in slow mode otherwise the
PROM will issue an error. To get better memory performance we now
switch to normal mode, when the PROM is no longer needed.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index 3f35d6367b..5268ac187b 100644
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -208,4 +208,30 @@ void __init sgimc_init(void)
 void __init prom_meminit(void) {}
 void __init prom_free_prom_memory(void)
 {
+#ifdef CONFIG_SGI_IP28
+	u32 mconfig1;
+	unsigned long flags;
+	spinlock_t lock;
+
+	/*
+	 * because ARCS accesses memory uncached we wait until ARCS
+	 * isn't needed any longer, before we switch from slow to
+	 * normal mode
+	 */
+	spin_lock_irqsave(&lock, flags);
+	mconfig1 = sgimc->mconfig1;
+	/* map ECC register */
+	sgimc->mconfig1 = (mconfig1 & 0xffff0000) | 0x2060;
+	iob();
+	/* switch to normal mode */
+	*(unsigned long *)PHYS_TO_XKSEG_UNCACHED(0x60000000) = 0;
+	iob();
+	/* reduce WR_COL */
+	sgimc->cmacc = (sgimc->cmacc & ~0xf) | 4;
+	iob();
+	/* restore old config */
+	sgimc->mconfig1 = mconfig1;
+	iob();
+	spin_unlock_irqrestore(&lock, flags);
+#endif
 }
diff --git a/include/asm-mips/barrier.h b/include/asm-mips/barrier.h
index 9d8cfbb5e7..8e9ac313ca 100644
--- a/include/asm-mips/barrier.h
+++ b/include/asm-mips/barrier.h
@@ -92,11 +92,25 @@
 #define fast_wmb()	__sync()
 #define fast_rmb()	__sync()
 #define fast_mb()	__sync()
+#ifdef CONFIG_SGI_IP28
+#define fast_iob()				\
+	__asm__ __volatile__(			\
+		".set	push\n\t"		\
+		".set	noreorder\n\t"		\
+		"lw	$0,%0\n\t"		\
+		"sync\n\t"			\
+		"lw	$0,%0\n\t"		\
+		".set	pop"			\
+		: /* no output */		\
+		: "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \
+		: "memory")
+#else
 #define fast_iob()				\
 	do {					\
 		__sync();			\
 		__fast_iob();			\
 	} while (0)
+#endif
 
 #ifdef CONFIG_CPU_HAS_WB