From: Joe Perches <joe@perches.com>
Date: Tue, 20 Nov 2007 07:45:16 +0000 (-0800)
Subject: [SPARC]: Add missing "space"
X-Git-Tag: v2.6.24-rc5~65^2~3
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=794b26e0600e3aab399f9d0f225f9e0b8782edbb;p=linux-2.6

[SPARC]: Add missing "space"

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index f2d432edc9..4cd5d7818d 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -329,7 +329,7 @@ int __init pcic_probe(void)
 	pcic->pcic_res_cfg_addr.name = "pcic_cfg_addr";
 	if ((pcic->pcic_config_space_addr =
 	    ioremap(regs[2].phys_addr, regs[2].reg_size * 2)) == 0) {
-		prom_printf("PCIC: Error, cannot map" 
+		prom_printf("PCIC: Error, cannot map "
 			    "PCI Configuration Space Address.\n");
 		prom_halt();
 	}
@@ -341,7 +341,7 @@ int __init pcic_probe(void)
 	pcic->pcic_res_cfg_data.name = "pcic_cfg_data";
 	if ((pcic->pcic_config_space_data =
 	    ioremap(regs[3].phys_addr, regs[3].reg_size * 2)) == 0) {
-		prom_printf("PCIC: Error, cannot map" 
+		prom_printf("PCIC: Error, cannot map "
 			    "PCI Configuration Space Data.\n");
 		prom_halt();
 	}
@@ -518,8 +518,8 @@ static void pcic_map_pci_device(struct linux_pcic *pcic,
 				 * board in a PCI slot. We must remap it
 				 * under 64K but it is not done yet. XXX
 				 */
-				printk("PCIC: Skipping I/O space at 0x%lx,"
-				    "this will Oops if a driver attaches;"
+				printk("PCIC: Skipping I/O space at 0x%lx, "
+				    "this will Oops if a driver attaches "
 				    "device '%s' at %02x:%02x)\n", address,
 				    namebuf, dev->bus->number, dev->devfn);
 			}