From: Yoichi Yuasa Date: Wed, 26 Jul 2006 14:34:19 +0000 (+0900) Subject: [MIPS] db1x00: Remove unused mirage_ts.c X-Git-Tag: v2.6.19-rc1~1071 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=79495d876c2074af5552a0c4b7aea600c2320e83;p=linux-2.6 [MIPS] db1x00: Remove unused mirage_ts.c CONFIG_WM97XX_COMODULE doesn't exist. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile index 4c7d763f21..51d62bd5d9 100644 --- a/arch/mips/au1000/db1x00/Makefile +++ b/arch/mips/au1000/db1x00/Makefile @@ -6,4 +6,3 @@ # Makefile for the Alchemy Semiconductor Db1x00 board. lib-y := init.o board_setup.o irqmap.o -obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c deleted file mode 100644 index 0942dcf695..0000000000 --- a/arch/mips/au1000/db1x00/mirage_ts.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * linux/arch/mips/au1000/db1x00/mirage_ts.c - * - * BRIEF MODULE DESCRIPTION - * Glue between Mirage board-specific touchscreen pieces - * and generic Wolfson Codec touchscreen support. - * - * Based on pb1100_ts.c used in Hydrogen II. - * - * Copyright (c) 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -/* - * Imported interface to Wolfson Codec driver. - */ -extern void *wm97xx_ts_get_handle(int which); -extern int wm97xx_ts_ready(void* ts_handle); -extern void wm97xx_ts_set_cal(void* ts_handle, int xscale, int xtrans, int yscale, int ytrans); -extern u16 wm97xx_ts_get_ac97(void* ts_handle, u8 reg); -extern void wm97xx_ts_set_ac97(void* ts_handle, u8 reg, u16 val); -extern int wm97xx_ts_read_data(void* ts_handle, long* x, long* y, long* pressure); -extern void wm97xx_ts_send_data(void* ts_handle, long x, long y, long z); - -int wm97xx_comodule_present = 1; - - -#define TS_NAME "mirage_ts" - -#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg) -#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg) -#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg) -#define DPRINTK(format, arg...) printk("%s: " format "\n", __FUNCTION__ , ## arg) - - -#define PEN_DOWN_IRQ AU1000_GPIO_7 - -static struct task_struct *ts_task = 0; -static DECLARE_COMPLETION(ts_complete); -static DECLARE_WAIT_QUEUE_HEAD(pendown_wait); - -#ifdef CONFIG_WM97XX_FIVEWIRETS -static int release_pressure = 1; -#else -static int release_pressure = 50; -#endif - -typedef struct { - long x; - long y; -} DOWN_EVENT; - -#define SAMPLE_RATE 50 /* samples per second */ -#define PEN_DEBOUNCE 5 /* samples for settling - fn of SAMPLE_RATE */ -#define PEN_UP_TIMEOUT 10 /* in seconds */ -#define PEN_UP_SETTLE 5 /* samples per second */ - -static struct { - int xscale; - int xtrans; - int yscale; - int ytrans; -} mirage_ts_cal = -{ -#if 0 - .xscale = 84, - .xtrans = -157, - .yscale = 66, - .ytrans = -150, -#else - .xscale = 84, - .xtrans = -150, - .yscale = 66, - .ytrans = -146, -#endif -}; - - -static void pendown_irq(int irqnr, void *devid, struct pt_regs *regs) -{ -//DPRINTK("got one 0x%x", au_readl(SYS_PINSTATERD)); - wake_up(&pendown_wait); -} - -static int ts_thread(void *id) -{ - static int pen_was_down = 0; - static DOWN_EVENT pen_xy; - long x, y, z; - void *ts; /* handle */ - struct task_struct *tsk = current; - int timeout = HZ / SAMPLE_RATE; - - ts_task = tsk; - - daemonize(); - tsk->tty = NULL; - tsk->policy = SCHED_FIFO; - tsk->rt_priority = 1; - strcpy(tsk->comm, "touchscreen"); - - /* only want to receive SIGKILL */ - spin_lock_irq(&tsk->sigmask_lock); - siginitsetinv(&tsk->blocked, sigmask(SIGKILL)); - recalc_sigpending(tsk); - spin_unlock_irq(&tsk->sigmask_lock); - - /* get handle for codec */ - ts = wm97xx_ts_get_handle(0); - - /* proceed only after everybody is ready */ - wait_event_timeout(pendown_wait, wm97xx_ts_ready(ts), HZ/4); - - /* board-specific calibration */ - wm97xx_ts_set_cal(ts, - mirage_ts_cal.xscale, - mirage_ts_cal.xtrans, - mirage_ts_cal.yscale, - mirage_ts_cal.ytrans); - - /* route Wolfson pendown interrupts to our GPIO */ - au_sync(); - wm97xx_ts_set_ac97(ts, 0x4c, wm97xx_ts_get_ac97(ts, 0x4c) & ~0x0008); - au_sync(); - wm97xx_ts_set_ac97(ts, 0x56, wm97xx_ts_get_ac97(ts, 0x56) & ~0x0008); - au_sync(); - wm97xx_ts_set_ac97(ts, 0x52, wm97xx_ts_get_ac97(ts, 0x52) | 0x2008); - au_sync(); - - for (;;) { - interruptible_sleep_on_timeout(&pendown_wait, timeout); - disable_irq(PEN_DOWN_IRQ); - if (signal_pending(tsk)) { - break; - } - - /* read codec */ - if (!wm97xx_ts_read_data(ts, &x, &y, &z)) - z = 0; /* treat no-data and pen-up the same */ - - if (signal_pending(tsk)) { - break; - } - - if (z >= release_pressure) { - y = ~y; /* top to bottom */ - if (pen_was_down > 1 /*&& pen_was_down < PEN_DEBOUNCE*/) {//THXXX - /* bounce ? */ - x = pen_xy.x; - y = pen_xy.y; - --pen_was_down; - } else if (pen_was_down <= 1) { - pen_xy.x = x; - pen_xy.y = y; - if (pen_was_down) - wm97xx_ts_send_data(ts, x, y, z); - pen_was_down = PEN_DEBOUNCE; - } - //wm97xx_ts_send_data(ts, x, y, z); - timeout = HZ / SAMPLE_RATE; - } else { - if (pen_was_down) { - if (--pen_was_down) - z = release_pressure; - else //THXXX - wm97xx_ts_send_data(ts, pen_xy.x, pen_xy.y, z); - } - /* The pendown signal takes some time to settle after - * reading the pen pressure so wait a little - * before enabling the pen. - */ - if (! pen_was_down) { -// interruptible_sleep_on_timeout(&pendown_wait, HZ / PEN_UP_SETTLE); - timeout = HZ * PEN_UP_TIMEOUT; - } - } - enable_irq(PEN_DOWN_IRQ); - } - enable_irq(PEN_DOWN_IRQ); - ts_task = NULL; - complete(&ts_complete); - return 0; -} - -static int __init ts_mirage_init(void) -{ - int ret; - - /* pen down signal is connected to GPIO 7 */ - - ret = request_irq(PEN_DOWN_IRQ, pendown_irq, 0, "ts-pendown", NULL); - if (ret) { - err("unable to get pendown irq%d: [%d]", PEN_DOWN_IRQ, ret); - return ret; - } - - lock_kernel(); - ret = kernel_thread(ts_thread, NULL, CLONE_FS | CLONE_FILES); - if (ret < 0) { - unlock_kernel(); - return ret; - } - unlock_kernel(); - - info("Mirage touchscreen IRQ initialized."); - - return 0; -} - -static void __exit ts_mirage_exit(void) -{ - if (ts_task) { - send_sig(SIGKILL, ts_task, 1); - wait_for_completion(&ts_complete); - } - - free_irq(PEN_DOWN_IRQ, NULL); -} - -module_init(ts_mirage_init); -module_exit(ts_mirage_exit); -