From: Stuart Hayes Date: Tue, 10 Apr 2007 20:38:43 +0000 (+0200) Subject: ide: ugly messages trying to open CD drive with no media present X-Git-Tag: v2.6.21-rc7~31^2~1 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=76ca1af10e28021e1894c5703da42b5e7bff1771;p=linux-2.6 ide: ugly messages trying to open CD drive with no media present I get the following error messages when trying to open a CD device (specifically, the Teac CD-ROM CD-224E) that has no media present: hda: packet command error: status=3D0x51 { DriveReady SeekComplete Error } hda: packet command error: error=3D0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown This happens when a "start stop unit" command (0x1b 0 0 0 3 0 0 0 0 0) is sent to the drive to try to close the CD-ROM tray, but this drive doesn't have that capability (it's a slim portable-type CD-ROM), so it reports sense key 5 (illegal request) with asc/ascq 24/0. This is exactly how SFF8090i says it should respond. But ide-cd.c (in cdrom_decode_status() ) just sees sense key 5 and spews out an error. It then goes on to request sense data, and cdrom_log_sense() understands this error and doesn't log it. The patch, for kernel 2.6.20.4, suppresses this error message. Signed-off-by: Stuart Hayes Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 45a928c058..638becda81 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -735,6 +735,15 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) cdrom_saw_media_change (drive); /*printk("%s: media changed\n",drive->name);*/ return 0; + } else if ((sense_key == ILLEGAL_REQUEST) && + (rq->cmd[0] == GPCMD_START_STOP_UNIT)) { + /* + * Don't print error message for this condition-- + * SFF8090i indicates that 5/24/00 is the correct + * response to a request to close the tray if the + * drive doesn't have that capability. + * cdrom_log_sense() knows this! + */ } else if (!(rq->cmd_flags & REQ_QUIET)) { /* Otherwise, print an error. */ ide_dump_status(drive, "packet command error", stat);