From: Liam Girdwood Date: Thu, 12 Oct 2006 12:29:03 +0000 (+0200) Subject: [ALSA] ASoC pxa2xx AC97 support X-Git-Tag: v2.6.21-rc1~83^2~62^2~172 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=75b41027662e29822746342865fa8abd941d2604;p=linux-2.6 [ALSA] ASoC pxa2xx AC97 support This patch adds pxa2xx AC97 ASoC audio support. It's based on sound/arm/pxa-ac97 by Nicolas Pitre with the following differences. o Modified driver structure to use ASoC core PCM callbacks. o Removed AC97 configuration function (all handled in ASoC core) o Added and exported ASoC DAI configuration table. o Added DMA support for AUX DAC and Mic ADC o Separated out AC97 reset into cold and warm reset functions. From: Liam Girdwood Signed-off-by: Nicolas Pitre Signed-off-by: Richard Purdie Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c new file mode 100644 index 0000000000..28b1985edc --- /dev/null +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -0,0 +1,437 @@ +/* + * linux/sound/pxa2xx-ac97.c -- AC97 support for the Intel PXA2xx chip. + * + * Author: Nicolas Pitre + * Created: Dec 02, 2004 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "pxa2xx-pcm.h" + +static DEFINE_MUTEX(car_mutex); +static DECLARE_WAIT_QUEUE_HEAD(gsr_wq); +static volatile long gsr_bits; + +#define AC97_DIR \ + (SND_SOC_DAIDIR_PLAYBACK | SND_SOC_DAIDIR_CAPTURE) + +#define AC97_RATES \ + (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) + +/* may need to expand this */ +static struct snd_soc_dai_mode pxa2xx_ac97_modes[] = { + { + .pcmfmt = SNDRV_PCM_FMTBIT_S16_LE, + .pcmrate = AC97_RATES, + .pcmdir = AC97_DIR, + }, +}; + +/* + * Beware PXA27x bugs: + * + * o Slot 12 read from modem space will hang controller. + * o CDONE, SDONE interrupt fails after any slot 12 IO. + * + * We therefore have an hybrid approach for waiting on SDONE (interrupt or + * 1 jiffy timeout if interrupt never comes). + */ + +static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, + unsigned short reg) +{ + unsigned short val = -1; + volatile u32 *reg_addr; + + mutex_lock(&car_mutex); + + /* set up primary or secondary codec/modem space */ +#ifdef CONFIG_PXA27x + reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; +#else + if (reg == AC97_GPIO_STATUS) + reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; + else + reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; +#endif + reg_addr += (reg >> 1); + +#ifndef CONFIG_PXA27x + if (reg == AC97_GPIO_STATUS) { + /* read from controller cache */ + val = *reg_addr; + goto out; + } +#endif + + /* start read access across the ac97 link */ + GSR = GSR_CDONE | GSR_SDONE; + gsr_bits = 0; + val = *reg_addr; + + wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1); + if (!((GSR | gsr_bits) & GSR_SDONE)) { + printk(KERN_ERR "%s: read error (ac97_reg=%x GSR=%#lx)\n", + __FUNCTION__, reg, GSR | gsr_bits); + val = -1; + goto out; + } + + /* valid data now */ + GSR = GSR_CDONE | GSR_SDONE; + gsr_bits = 0; + val = *reg_addr; + /* but we've just started another cycle... */ + wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1); + +out: mutex_unlock(&car_mutex); + return val; +} + +static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, + unsigned short val) +{ + volatile u32 *reg_addr; + + mutex_lock(&car_mutex); + + /* set up primary or secondary codec/modem space */ +#ifdef CONFIG_PXA27x + reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; +#else + if (reg == AC97_GPIO_STATUS) + reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; + else + reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; +#endif + reg_addr += (reg >> 1); + + GSR = GSR_CDONE | GSR_SDONE; + gsr_bits = 0; + *reg_addr = val; + wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1); + if (!((GSR | gsr_bits) & GSR_CDONE)) + printk(KERN_ERR "%s: write error (ac97_reg=%x GSR=%#lx)\n", + __FUNCTION__, reg, GSR | gsr_bits); + + mutex_unlock(&car_mutex); +} + +static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) +{ + gsr_bits = 0; + +#ifdef CONFIG_PXA27x + /* warm reset broken on Bulverde, + so manually keep AC97 reset high */ + pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); + udelay(10); + GCR |= GCR_WARM_RST; + pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); + udelay(500); +#else + GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN; + wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); +#endif + + if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) + printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n", + __FUNCTION__, gsr_bits); + + GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); + GCR |= GCR_SDONE_IE|GCR_CDONE_IE; +} + +static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97) +{ + GCR &= GCR_COLD_RST; /* clear everything but nCRST */ + GCR &= ~GCR_COLD_RST; /* then assert nCRST */ + + gsr_bits = 0; +#ifdef CONFIG_PXA27x + /* PXA27x Developers Manual section 13.5.2.2.1 */ + pxa_set_cken(1 << 31, 1); + udelay(5); + pxa_set_cken(1 << 31, 0); + GCR = GCR_COLD_RST; + udelay(50); +#else + GCR = GCR_COLD_RST; + GCR |= GCR_CDONE_IE|GCR_SDONE_IE; + wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); +#endif + + if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) + printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n", + __FUNCTION__, gsr_bits); + + GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); + GCR |= GCR_SDONE_IE|GCR_CDONE_IE; +} + +static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id) +{ + long status; + + status = GSR; + if (status) { + GSR = status; + gsr_bits |= status; + wake_up(&gsr_wq); + +#ifdef CONFIG_PXA27x + /* Although we don't use those we still need to clear them + since they tend to spuriously trigger when MMC is used + (hardware bug? go figure)... */ + MISR = MISR_EOC; + PISR = PISR_EOC; + MCSR = MCSR_EOC; +#endif + + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +struct snd_ac97_bus_ops soc_ac97_ops = { + .read = pxa2xx_ac97_read, + .write = pxa2xx_ac97_write, + .warm_reset = pxa2xx_ac97_warm_reset, + .reset = pxa2xx_ac97_cold_reset, +}; + +static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = { + .name = "AC97 PCM Stereo out", + .dev_addr = __PREG(PCDR), + .drcmr = &DRCMRTXPCDR, + .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | + DCMD_BURST32 | DCMD_WIDTH4, +}; + +static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = { + .name = "AC97 PCM Stereo in", + .dev_addr = __PREG(PCDR), + .drcmr = &DRCMRRXPCDR, + .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | + DCMD_BURST32 | DCMD_WIDTH4, +}; + +static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = { + .name = "AC97 Aux PCM (Slot 5) Mono out", + .dev_addr = __PREG(MODR), + .drcmr = &DRCMRTXMODR, + .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | + DCMD_BURST16 | DCMD_WIDTH2, +}; + +static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = { + .name = "AC97 Aux PCM (Slot 5) Mono in", + .dev_addr = __PREG(MODR), + .drcmr = &DRCMRRXMODR, + .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | + DCMD_BURST16 | DCMD_WIDTH2, +}; + +static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = { + .name = "AC97 Mic PCM (Slot 6) Mono in", + .dev_addr = __PREG(MCDR), + .drcmr = &DRCMRRXMCDR, + .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | + DCMD_BURST16 | DCMD_WIDTH2, +}; + +#ifdef CONFIG_PM +static int pxa2xx_ac97_suspend(struct platform_device *pdev, + struct snd_soc_cpu_dai *dai) +{ + GCR |= GCR_ACLINK_OFF; + pxa_set_cken(CKEN2_AC97, 0); + return 0; +} + +static int pxa2xx_ac97_resume(struct platform_device *pdev, + struct snd_soc_cpu_dai *dai) +{ + pxa_gpio_mode(GPIO31_SYNC_AC97_MD); + pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); + pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); + pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); +#ifdef CONFIG_PXA27x + /* Use GPIO 113 as AC97 Reset on Bulverde */ + pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); +#endif + pxa_set_cken(CKEN2_AC97, 1); + return 0; +} + +#else +#define pxa2xx_ac97_suspend NULL +#define pxa2xx_ac97_resume NULL +#endif + +static int pxa2xx_ac97_probe(struct platform_device *pdev) +{ + int ret; + + ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL); + if (ret < 0) + goto err; + + pxa_gpio_mode(GPIO31_SYNC_AC97_MD); + pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); + pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); + pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); +#ifdef CONFIG_PXA27x + /* Use GPIO 113 as AC97 Reset on Bulverde */ + pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); +#endif + pxa_set_cken(CKEN2_AC97, 1); + return 0; + + err: + if (CKEN & CKEN2_AC97) { + GCR |= GCR_ACLINK_OFF; + free_irq(IRQ_AC97, NULL); + pxa_set_cken(CKEN2_AC97, 0); + } + return ret; +} + +static void pxa2xx_ac97_remove(struct platform_device *pdev) +{ + GCR |= GCR_ACLINK_OFF; + free_irq(IRQ_AC97, NULL); + pxa_set_cken(CKEN2_AC97, 0); +} + +static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_out; + else + rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_in; + + return 0; +} + +static int pxa2xx_ac97_hw_aux_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_out; + else + rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_in; + + return 0; +} + +static int pxa2xx_ac97_hw_mic_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + return -ENODEV; + else + rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_mic_mono_in; + + return 0; +} + +/* + * There is only 1 physical AC97 interface for pxa2xx, but it + * has extra fifo's that can be used for aux DACs and ADCs. + */ +struct snd_soc_cpu_dai pxa_ac97_dai[] = { +{ + .name = "pxa2xx-ac97", + .id = 0, + .type = SND_SOC_DAI_AC97, + .probe = pxa2xx_ac97_probe, + .remove = pxa2xx_ac97_remove, + .suspend = pxa2xx_ac97_suspend, + .resume = pxa2xx_ac97_resume, + .playback = { + .stream_name = "AC97 Playback", + .channels_min = 2, + .channels_max = 2,}, + .capture = { + .stream_name = "AC97 Capture", + .channels_min = 2, + .channels_max = 2,}, + .ops = { + .hw_params = pxa2xx_ac97_hw_params,}, + .caps = { + .num_modes = ARRAY_SIZE(pxa2xx_ac97_modes), + .mode = pxa2xx_ac97_modes,}, +}, +{ + .name = "pxa2xx-ac97-aux", + .id = 1, + .type = SND_SOC_DAI_AC97, + .playback = { + .stream_name = "AC97 Aux Playback", + .channels_min = 1, + .channels_max = 1,}, + .capture = { + .stream_name = "AC97 Aux Capture", + .channels_min = 1, + .channels_max = 1,}, + .ops = { + .hw_params = pxa2xx_ac97_hw_aux_params,}, + .caps = { + .num_modes = ARRAY_SIZE(pxa2xx_ac97_modes), + .mode = pxa2xx_ac97_modes,}, +}, +{ + .name = "pxa2xx-ac97-mic", + .id = 2, + .type = SND_SOC_DAI_AC97, + .capture = { + .stream_name = "AC97 Mic Capture", + .channels_min = 1, + .channels_max = 1,}, + .ops = { + .hw_params = pxa2xx_ac97_hw_mic_params,}, + .caps = { + .num_modes = ARRAY_SIZE(pxa2xx_ac97_modes), + .mode = pxa2xx_ac97_modes,},}, +}; + +EXPORT_SYMBOL_GPL(pxa_ac97_dai); +EXPORT_SYMBOL_GPL(soc_ac97_ops); + +MODULE_AUTHOR("Nicolas Pitre"); +MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip"); +MODULE_LICENSE("GPL");