From: Michael Chan <mchan@broadcom.com>
Date: Thu, 25 Aug 2005 22:39:15 +0000 (-0700)
Subject: [BNX2]: update version and minor fixes
X-Git-Tag: v2.6.14-rc1~1035^2~21
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=73eef4cddb2738c4e8c5ef157ebb1b19d6c9272f;p=linux-2.6

[BNX2]: update version and minor fixes

Update version and add 4 minor fixes, the last 2 were suggested by
Jeff Garzik:

1. check for a valid ethernet address before setting it
2. zero out bp->regview if init_one encounters an error and unmaps
   the IO address. This prevents remove_one from unmapping again.
3. use netif_rx_schedule() instead of hand coding the same.
4. use IRQ_HANDLED and IRQ_NONE.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 418190b79f..7babf6af4e 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -14,8 +14,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.2.19"
-#define DRV_MODULE_RELDATE	"May 23, 2005"
+#define DRV_MODULE_VERSION	"1.2.20"
+#define DRV_MODULE_RELDATE	"August 22, 2005"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -1538,15 +1538,12 @@ bnx2_msi(int irq, void *dev_instance, struct pt_regs *regs)
 		BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
 
 	/* Return here if interrupt is disabled. */
-	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-		return IRQ_RETVAL(1);
-	}
+	if (unlikely(atomic_read(&bp->intr_sem) != 0))
+		return IRQ_HANDLED;
 
-	if (netif_rx_schedule_prep(dev)) {
-		__netif_rx_schedule(dev);
-	}
+	netif_rx_schedule(dev);
 
-	return IRQ_RETVAL(1);
+	return IRQ_HANDLED;
 }
 
 static irqreturn_t
@@ -1564,22 +1561,19 @@ bnx2_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
 	if ((bp->status_blk->status_idx == bp->last_status_idx) ||
 	    (REG_RD(bp, BNX2_PCICFG_MISC_STATUS) &
 	     BNX2_PCICFG_MISC_STATUS_INTA_VALUE))
-		return IRQ_RETVAL(0);
+		return IRQ_NONE;
 
 	REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
 		BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
 		BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
 
 	/* Return here if interrupt is shared and is disabled. */
-	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-		return IRQ_RETVAL(1);
-	}
+	if (unlikely(atomic_read(&bp->intr_sem) != 0))
+		return IRQ_HANDLED;
 
-	if (netif_rx_schedule_prep(dev)) {
-		__netif_rx_schedule(dev);
-	}
+	netif_rx_schedule(dev);
 
-	return IRQ_RETVAL(1);
+	return IRQ_HANDLED;
 }
 
 static int
@@ -5071,6 +5065,9 @@ bnx2_change_mac_addr(struct net_device *dev, void *p)
 	struct sockaddr *addr = p;
 	struct bnx2 *bp = dev->priv;
 
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 	if (netif_running(dev))
 		bnx2_set_mac_addr(bp);
@@ -5369,6 +5366,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 err_out_unmap:
 	if (bp->regview) {
 		iounmap(bp->regview);
+		bp->regview = NULL;
 	}
 
 err_out_release: