From: NeilBrown Date: Fri, 9 Sep 2005 23:23:54 +0000 (-0700) Subject: [PATCH] md: add write-intent-bitmap support to raid5 X-Git-Tag: v2.6.14-rc1~238 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=72626685dc66d455742a7f215a0535c551628b9e;p=linux-2.6 [PATCH] md: add write-intent-bitmap support to raid5 Most awkward part of this is delaying write requests until bitmap updates have been flushed. To achieve this, we have a sequence number (seq_flush) which is incremented each time the raid5 is unplugged. If the raid thread notices that this has changed, it flushes bitmap changes, and assigned the value of seq_flush to seq_write. When a write request arrives, it is given the number from seq_write, and that write request may not complete until seq_flush is larger than the saved seq number. We have a new queue for storing stripes which are waiting for a bitmap flush and an extra flag for stripes to record if the write was 'degraded' and so should not clear the a bit in the bitmap. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/md/md.c b/drivers/md/md.c index be7873c61b..dbf540a7fc 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -645,7 +645,7 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev) if (sb->state & (1<bitmap_file == NULL) { - if (mddev->level != 1) { + if (mddev->level != 1 && mddev->level != 5) { /* FIXME use a better test */ printk(KERN_WARNING "md: bitmaps only support for raid1\n"); return -EINVAL; @@ -3517,7 +3517,6 @@ void md_done_sync(mddev_t *mddev, int blocks, int ok) */ void md_write_start(mddev_t *mddev, struct bio *bi) { - DEFINE_WAIT(w); if (bio_data_dir(bi) != WRITE) return; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index ed859e08d6..4683ca24c0 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -24,6 +24,8 @@ #include #include +#include + /* * Stripe cache */ @@ -79,8 +81,13 @@ static inline void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh) if (test_bit(STRIPE_HANDLE, &sh->state)) { if (test_bit(STRIPE_DELAYED, &sh->state)) list_add_tail(&sh->lru, &conf->delayed_list); - else + else if (test_bit(STRIPE_BIT_DELAY, &sh->state) && + conf->seq_write == sh->bm_seq) + list_add_tail(&sh->lru, &conf->bitmap_list); + else { + clear_bit(STRIPE_BIT_DELAY, &sh->state); list_add_tail(&sh->lru, &conf->handle_list); + } md_wakeup_thread(conf->mddev->thread); } else { if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { @@ -244,6 +251,9 @@ static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector spin_lock_irq(&conf->device_lock); do { + wait_event_lock_irq(conf->wait_for_stripe, + conf->quiesce == 0, + conf->device_lock, /* nothing */); sh = __find_stripe(conf, sector); if (!sh) { if (!conf->inactive_blocked) @@ -803,6 +813,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in { struct bio **bip; raid5_conf_t *conf = sh->raid_conf; + int firstwrite=0; PRINTK("adding bh b#%llu to stripe s#%llu\n", (unsigned long long)bi->bi_sector, @@ -811,9 +822,11 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in spin_lock(&sh->lock); spin_lock_irq(&conf->device_lock); - if (forwrite) + if (forwrite) { bip = &sh->dev[dd_idx].towrite; - else + if (*bip == NULL && sh->dev[dd_idx].written == NULL) + firstwrite = 1; + } else bip = &sh->dev[dd_idx].toread; while (*bip && (*bip)->bi_sector < bi->bi_sector) { if ((*bip)->bi_sector + ((*bip)->bi_size >> 9) > bi->bi_sector) @@ -836,6 +849,13 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in (unsigned long long)bi->bi_sector, (unsigned long long)sh->sector, dd_idx); + if (conf->mddev->bitmap && firstwrite) { + sh->bm_seq = conf->seq_write; + bitmap_startwrite(conf->mddev->bitmap, sh->sector, + STRIPE_SECTORS, 0); + set_bit(STRIPE_BIT_DELAY, &sh->state); + } + if (forwrite) { /* check if page is covered */ sector_t sector = sh->dev[dd_idx].sector; @@ -958,12 +978,13 @@ static void handle_stripe(struct stripe_head *sh) * need to be failed */ if (failed > 1 && to_read+to_write+written) { - spin_lock_irq(&conf->device_lock); for (i=disks; i--; ) { + int bitmap_end = 0; + spin_lock_irq(&conf->device_lock); /* fail all writes first */ bi = sh->dev[i].towrite; sh->dev[i].towrite = NULL; - if (bi) to_write--; + if (bi) { to_write--; bitmap_end = 1; } if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) wake_up(&conf->wait_for_overlap); @@ -981,6 +1002,7 @@ static void handle_stripe(struct stripe_head *sh) /* and fail all 'written' */ bi = sh->dev[i].written; sh->dev[i].written = NULL; + if (bi) bitmap_end = 1; while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS) { struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector); clear_bit(BIO_UPTODATE, &bi->bi_flags); @@ -1009,8 +1031,11 @@ static void handle_stripe(struct stripe_head *sh) bi = nextbi; } } + spin_unlock_irq(&conf->device_lock); + if (bitmap_end) + bitmap_endwrite(conf->mddev->bitmap, sh->sector, + STRIPE_SECTORS, 0, 0); } - spin_unlock_irq(&conf->device_lock); } if (failed > 1 && syncing) { md_done_sync(conf->mddev, STRIPE_SECTORS,0); @@ -1038,6 +1063,7 @@ static void handle_stripe(struct stripe_head *sh) test_bit(R5_UPTODATE, &dev->flags) ) { /* We can return any write requests */ struct bio *wbi, *wbi2; + int bitmap_end = 0; PRINTK("Return write for disc %d\n", i); spin_lock_irq(&conf->device_lock); wbi = dev->written; @@ -1051,7 +1077,13 @@ static void handle_stripe(struct stripe_head *sh) } wbi = wbi2; } + if (dev->towrite == NULL) + bitmap_end = 1; spin_unlock_irq(&conf->device_lock); + if (bitmap_end) + bitmap_endwrite(conf->mddev->bitmap, sh->sector, + STRIPE_SECTORS, + !test_bit(STRIPE_DEGRADED, &sh->state), 0); } } } @@ -1175,7 +1207,8 @@ static void handle_stripe(struct stripe_head *sh) } } /* now if nothing is locked, and if we have enough data, we can start a write request */ - if (locked == 0 && (rcw == 0 ||rmw == 0)) { + if (locked == 0 && (rcw == 0 ||rmw == 0) && + !test_bit(STRIPE_BIT_DELAY, &sh->state)) { PRINTK("Computing parity...\n"); compute_parity(sh, rcw==0 ? RECONSTRUCT_WRITE : READ_MODIFY_WRITE); /* now every locked buffer is ready to be written */ @@ -1231,6 +1264,7 @@ static void handle_stripe(struct stripe_head *sh) dev = &sh->dev[failed_num]; set_bit(R5_LOCKED, &dev->flags); set_bit(R5_Wantwrite, &dev->flags); + clear_bit(STRIPE_DEGRADED, &sh->state); locked++; set_bit(STRIPE_INSYNC, &sh->state); set_bit(R5_Syncio, &dev->flags); @@ -1298,6 +1332,8 @@ static void handle_stripe(struct stripe_head *sh) bi->bi_next = NULL; generic_make_request(bi); } else { + if (rw == 1) + set_bit(STRIPE_DEGRADED, &sh->state); PRINTK("skip op %ld on disc %d for sector %llu\n", bi->bi_rw, i, (unsigned long long)sh->sector); clear_bit(R5_LOCKED, &sh->dev[i].flags); @@ -1322,6 +1358,20 @@ static inline void raid5_activate_delayed(raid5_conf_t *conf) } } +static inline void activate_bit_delay(raid5_conf_t *conf) +{ + /* device_lock is held */ + struct list_head head; + list_add(&head, &conf->bitmap_list); + list_del_init(&conf->bitmap_list); + while (!list_empty(&head)) { + struct stripe_head *sh = list_entry(head.next, struct stripe_head, lru); + list_del_init(&sh->lru); + atomic_inc(&sh->count); + __release_stripe(conf, sh); + } +} + static void unplug_slaves(mddev_t *mddev) { raid5_conf_t *conf = mddev_to_conf(mddev); @@ -1354,8 +1404,10 @@ static void raid5_unplug_device(request_queue_t *q) spin_lock_irqsave(&conf->device_lock, flags); - if (blk_remove_plug(q)) + if (blk_remove_plug(q)) { + conf->seq_flush++; raid5_activate_delayed(conf); + } md_wakeup_thread(mddev->thread); spin_unlock_irqrestore(&conf->device_lock, flags); @@ -1493,10 +1545,20 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i sector_t first_sector; int raid_disks = conf->raid_disks; int data_disks = raid_disks-1; + sector_t max_sector = mddev->size << 1; + int sync_blocks; - if (sector_nr >= mddev->size <<1) { + if (sector_nr >= max_sector) { /* just being told to finish up .. nothing much to do */ unplug_slaves(mddev); + + if (mddev->curr_resync < max_sector) /* aborted */ + bitmap_end_sync(mddev->bitmap, mddev->curr_resync, + &sync_blocks, 1); + else /* compelted sync */ + conf->fullsync = 0; + bitmap_close_sync(mddev->bitmap); + return 0; } /* if there is 1 or more failed drives and we are trying @@ -1508,6 +1570,13 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i *skipped = 1; return rv; } + if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 1) && + !conf->fullsync && sync_blocks >= STRIPE_SECTORS) { + /* we can skip this block, and probably more */ + sync_blocks /= STRIPE_SECTORS; + *skipped = 1; + return sync_blocks * STRIPE_SECTORS; /* keep things rounded to whole stripes */ + } x = sector_nr; chunk_offset = sector_div(x, sectors_per_chunk); @@ -1525,6 +1594,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout(1); } + bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 0); spin_lock(&sh->lock); set_bit(STRIPE_SYNCING, &sh->state); clear_bit(STRIPE_INSYNC, &sh->state); @@ -1558,6 +1628,13 @@ static void raid5d (mddev_t *mddev) while (1) { struct list_head *first; + if (conf->seq_flush - conf->seq_write > 0) { + int seq = conf->seq_flush; + bitmap_unplug(mddev->bitmap); + conf->seq_write = seq; + activate_bit_delay(conf); + } + if (list_empty(&conf->handle_list) && atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD && !blk_queue_plugged(mddev->queue) && @@ -1591,7 +1668,7 @@ static void raid5d (mddev_t *mddev) PRINTK("--- raid5d inactive\n"); } -static int run (mddev_t *mddev) +static int run(mddev_t *mddev) { raid5_conf_t *conf; int raid_disk, memory; @@ -1621,6 +1698,7 @@ static int run (mddev_t *mddev) init_waitqueue_head(&conf->wait_for_overlap); INIT_LIST_HEAD(&conf->handle_list); INIT_LIST_HEAD(&conf->delayed_list); + INIT_LIST_HEAD(&conf->bitmap_list); INIT_LIST_HEAD(&conf->inactive_list); atomic_set(&conf->active_stripes, 0); atomic_set(&conf->preread_active_stripes, 0); @@ -1732,6 +1810,9 @@ memory = conf->max_nr_stripes * (sizeof(struct stripe_head) + /* Ok, everything is just fine now */ + if (mddev->bitmap) + mddev->thread->timeout = mddev->bitmap->daemon_sleep * HZ; + mddev->queue->unplug_fn = raid5_unplug_device; mddev->queue->issue_flush_fn = raid5_issue_flush; @@ -1912,6 +1993,8 @@ static int raid5_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) rdev->in_sync = 0; rdev->raid_disk = disk; found = 1; + if (rdev->saved_raid_disk != disk) + conf->fullsync = 1; p->rdev = rdev; break; } @@ -1941,6 +2024,35 @@ static int raid5_resize(mddev_t *mddev, sector_t sectors) return 0; } +static void raid5_quiesce(mddev_t *mddev, int state) +{ + raid5_conf_t *conf = mddev_to_conf(mddev); + + switch(state) { + case 1: /* stop all writes */ + spin_lock_irq(&conf->device_lock); + conf->quiesce = 1; + wait_event_lock_irq(conf->wait_for_stripe, + atomic_read(&conf->active_stripes) == 0, + conf->device_lock, /* nothing */); + spin_unlock_irq(&conf->device_lock); + break; + + case 0: /* re-enable writes */ + spin_lock_irq(&conf->device_lock); + conf->quiesce = 0; + wake_up(&conf->wait_for_stripe); + spin_unlock_irq(&conf->device_lock); + break; + } + if (mddev->thread) { + if (mddev->bitmap) + mddev->thread->timeout = mddev->bitmap->daemon_sleep * HZ; + else + mddev->thread->timeout = MAX_SCHEDULE_TIMEOUT; + md_wakeup_thread(mddev->thread); + } +} static mdk_personality_t raid5_personality= { .name = "raid5", @@ -1955,6 +2067,7 @@ static mdk_personality_t raid5_personality= .spare_active = raid5_spare_active, .sync_request = sync_request, .resize = raid5_resize, + .quiesce = raid5_quiesce, }; static int __init raid5_init (void) diff --git a/include/linux/raid/raid5.h b/include/linux/raid/raid5.h index d63ddcb4af..176fc653c2 100644 --- a/include/linux/raid/raid5.h +++ b/include/linux/raid/raid5.h @@ -134,6 +134,7 @@ struct stripe_head { unsigned long state; /* state flags */ atomic_t count; /* nr of active thread/requests */ spinlock_t lock; + int bm_seq; /* sequence number for bitmap flushes */ struct r5dev { struct bio req; struct bio_vec vec; @@ -165,12 +166,13 @@ struct stripe_head { /* * Stripe state */ -#define STRIPE_ERROR 1 #define STRIPE_HANDLE 2 #define STRIPE_SYNCING 3 #define STRIPE_INSYNC 4 #define STRIPE_PREREAD_ACTIVE 5 #define STRIPE_DELAYED 6 +#define STRIPE_DEGRADED 7 +#define STRIPE_BIT_DELAY 8 /* * Plugging: @@ -210,10 +212,20 @@ struct raid5_private_data { struct list_head handle_list; /* stripes needing handling */ struct list_head delayed_list; /* stripes that have plugged requests */ + struct list_head bitmap_list; /* stripes delaying awaiting bitmap update */ atomic_t preread_active_stripes; /* stripes with scheduled io */ char cache_name[20]; kmem_cache_t *slab_cache; /* for allocating stripes */ + + int seq_flush, seq_write; + int quiesce; + + int fullsync; /* set to 1 if a full sync is needed, + * (fresh device added). + * Cleared when a sync completes. + */ + /* * Free stripes pool */