From: NeilBrown <neilb@cse.unsw.edu.au>
Date: Wed, 22 Jun 2005 00:17:09 +0000 (-0700)
Subject: [PATCH] md: cause md/raid1 to "repack" working devices when number of drives is changed
X-Git-Tag: v2.6.13-rc1~68^2~582^2~26
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=6ea9c07c6c6d1c14d9757dd8470dc4c85bbe9f28;p=linux-2.6

[PATCH] md: cause md/raid1 to "repack" working devices when number of drives is changed

i.e.  missing or failed drives are moved to the end of the list.  The means
a 3 drive md array with the first drive missing can be shrunk to a two
drive array.  Currently that isn't possible.

Also, the "last_used" device number might be out-of-range after the number
of devices is reduced, so we set it to 0.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 1db5de52d3..4947f599b6 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1349,17 +1349,26 @@ static int raid1_reshape(mddev_t *mddev, int raid_disks)
 	 * We allocate a new r1bio_pool if we can.
 	 * Then raise a device barrier and wait until all IO stops.
 	 * Then resize conf->mirrors and swap in the new r1bio pool.
+	 *
+	 * At the same time, we "pack" the devices so that all the missing
+	 * devices have the higher raid_disk numbers.
 	 */
 	mempool_t *newpool, *oldpool;
 	struct pool_info *newpoolinfo;
 	mirror_info_t *newmirrors;
 	conf_t *conf = mddev_to_conf(mddev);
+	int cnt;
 
-	int d;
+	int d, d2;
 
-	for (d= raid_disks; d < conf->raid_disks; d++)
-		if (conf->mirrors[d].rdev)
+	if (raid_disks < conf->raid_disks) {
+		cnt=0;
+		for (d= 0; d < conf->raid_disks; d++)
+			if (conf->mirrors[d].rdev)
+				cnt++;
+		if (cnt > raid_disks)
 			return -EBUSY;
+	}
 
 	newpoolinfo = kmalloc(sizeof(*newpoolinfo), GFP_KERNEL);
 	if (!newpoolinfo)
@@ -1390,8 +1399,12 @@ static int raid1_reshape(mddev_t *mddev, int raid_disks)
 	/* ok, everything is stopped */
 	oldpool = conf->r1bio_pool;
 	conf->r1bio_pool = newpool;
-	for (d=0; d < raid_disks && d < conf->raid_disks; d++)
-		newmirrors[d] = conf->mirrors[d];
+
+	for (d=d2=0; d < conf->raid_disks; d++)
+		if (conf->mirrors[d].rdev) {
+			conf->mirrors[d].rdev->raid_disk = d2;
+			newmirrors[d2++].rdev = conf->mirrors[d].rdev;
+		}
 	kfree(conf->mirrors);
 	conf->mirrors = newmirrors;
 	kfree(conf->poolinfo);
@@ -1400,6 +1413,7 @@ static int raid1_reshape(mddev_t *mddev, int raid_disks)
 	mddev->degraded += (raid_disks - conf->raid_disks);
 	conf->raid_disks = mddev->raid_disks = raid_disks;
 
+	conf->last_used = 0; /* just make sure it is in-range */
 	spin_lock_irq(&conf->resync_lock);
 	conf->barrier--;
 	spin_unlock_irq(&conf->resync_lock);