From: Alan <alan@lxorguk.ukuu.org.uk>
Date: Sat, 6 Jan 2007 00:37:01 +0000 (-0800)
Subject: [PATCH] hpt37x: Two important bug fixes
X-Git-Tag: v2.6.20-rc4~13
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=6929da4427b4335365dd51ab0b7dd2a0393656f0;p=linux-2.6

[PATCH] hpt37x: Two important bug fixes

The HPT37x driver very carefully handles DMA completions and the needed
fixups are done on pci registers 0x50 and 0x52.  This is unfortunate
because the actual registers are 0x50 and 0x54.  Fixing this offset cures
the second channel problems reported.

Secondly there are some problems with the HPT370 and certain ATA drives.
The filter code however only filters ATAPI devices due to a reversed type
check.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---

diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 47082df719..dfb306057c 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.5.1"
+#define DRV_VERSION	"0.5.2"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -416,7 +416,7 @@ static const char *bad_ata100_5[] = {
 
 static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
 {
-	if (adev->class != ATA_DEV_ATA) {
+	if (adev->class == ATA_DEV_ATA) {
 		if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
 			mask &= ~ATA_MASK_UDMA;
 		if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
@@ -749,7 +749,7 @@ static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	int mscreg = 0x50 + 2 * ap->port_no;
+	int mscreg = 0x50 + 4 * ap->port_no;
 	u8 bwsr_stat, msc_stat;
 
 	pci_read_config_byte(pdev, 0x6A, &bwsr_stat);