From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 1 Aug 2007 21:46:46 +0000 (+0200)
Subject: it8213: PIO fixes (take 2)
X-Git-Tag: v2.6.23-rc2~23^2~3
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=68aaf8150308dbf9d0e5ccd5bc05491ba575f966;p=linux-2.6

it8213: PIO fixes (take 2)

* Rename it8213_tuneproc() to it8213_tune_pio() and add it8213_tuneproc()
  wrapper.  Move finding of the best PIO mode to the new wrapper.

* Add setting of transfer mode on the device to it8213_tuneproc().

* Don't call it8213_dma_2_pio() for PIO modes in it8213_tune_chipset().

* Use it8213_tuneproc() in it8213_config_drive_for_dma().

v2:
* Remove PIO modes from it8213_dma_2_pio(), they are no longer needed there
  (Noticed by Sergei)

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---

diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 95dbed7e60..70b3245dbf 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -21,7 +21,7 @@
  *	it8213_dma_2_pio		-	return the PIO mode matching DMA
  *	@xfer_rate: transfer speed
  *
- *	Returns the nearest equivalent PIO timing for the PIO or DMA
+ *	Returns the nearest equivalent PIO timing for the DMA
  *	mode requested by the controller.
  */
 
@@ -35,34 +35,28 @@ static u8 it8213_dma_2_pio (u8 xfer_rate) {
 		case XFER_UDMA_1:
 		case XFER_UDMA_0:
 		case XFER_MW_DMA_2:
-		case XFER_PIO_4:
 			return 4;
 		case XFER_MW_DMA_1:
-		case XFER_PIO_3:
 			return 3;
 		case XFER_SW_DMA_2:
-		case XFER_PIO_2:
 			return 2;
 		case XFER_MW_DMA_0:
 		case XFER_SW_DMA_1:
 		case XFER_SW_DMA_0:
-		case XFER_PIO_1:
-		case XFER_PIO_0:
-		case XFER_PIO_SLOW:
 		default:
 			return 0;
 	}
 }
 
 /*
- *	it8213_tuneproc	-	tune a drive
+ *	it8213_tune_pio	-	tune a drive
  *	@drive: drive to tune
  *	@pio: desired PIO mode
  *
  *	Set the interface PIO mode.
  */
 
-static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
+static void it8213_tune_pio(ide_drive_t *drive, const u8 pio)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;
@@ -82,8 +76,6 @@ static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
 					{ 2, 1 },
 					{ 2, 3 }, };
 
-	pio = ide_get_best_pio_mode(drive, pio, 4);
-
 	spin_lock_irqsave(&tune_lock, flags);
 	pci_read_config_word(dev, master_port, &master_data);
 
@@ -113,6 +105,13 @@ static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
 	spin_unlock_irqrestore(&tune_lock, flags);
 }
 
+static void it8213_tuneproc(ide_drive_t *drive, u8 pio)
+{
+	pio = ide_get_best_pio_mode(drive, pio, 4);
+	it8213_tune_pio(drive, pio);
+	ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
 /**
  *	it8213_tune_chipset	-	set controller timings
  *	@drive: Drive to set up
@@ -193,7 +192,12 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 		if (reg55 & w_flag)
 			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
 	}
-	it8213_tuneproc(drive, it8213_dma_2_pio(speed));
+
+	if (speed > XFER_PIO_4)
+		it8213_tune_pio(drive, it8213_dma_2_pio(speed));
+	else
+		it8213_tune_pio(drive, speed - XFER_PIO_0);
+
 	return ide_config_drive_speed(drive, speed);
 }
 
@@ -209,13 +213,10 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 
 static int it8213_config_drive_for_dma (ide_drive_t *drive)
 {
-	u8 pio;
-
 	if (ide_tune_dma(drive))
 		return 0;
 
-	pio = ide_get_best_pio_mode(drive, 255, 4);
-	it8213_tune_chipset(drive, XFER_PIO_0 + pio);
+	it8213_tuneproc(drive, 255);
 
 	return -1;
 }