From: olh@suse.de <olh@suse.de>
Date: Wed, 17 Dec 2003 07:41:59 +0000 (-0800)
Subject: [PATCH] dump latest klibc into the udev build tree
X-Git-Tag: 009~5
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=666269480900dd8d099b9e188c16acc9f7f31ee5;p=systemd

[PATCH] dump latest klibc into the udev build tree

KLIBC is used as an internal makefile variable, it expands to either
true or false right now. udev should use something else than KLIBC to
allow build against the latest and greatest klibc version.
---

diff --git a/Makefile b/Makefile
index 4a545db9..3653595b 100644
--- a/Makefile
+++ b/Makefile
@@ -22,7 +22,7 @@ DEBUG = false
 
 # Set the following to `true' to make udev emit a D-BUS signal when a
 # new node is created.
-DBUS = false
+USE_DBUS = false
 
 
 ROOT =		udev
@@ -57,7 +57,7 @@ udevdir = ${prefix}/udev
 
 # Comment out this line to build with something other 
 # than the local version of klibc
-#KLIBC = true
+#USE_KLIBC = true
 
 # If you are running a cross compiler, you may want to set this
 # to something more interesting, like "arm-linux-".  I you want
@@ -116,7 +116,7 @@ endif
 
 # If we are using our version of klibc, then we need to build and link it.
 # Otherwise, use glibc and link statically.
-ifeq ($(strip $(KLIBC)),true)
+ifeq ($(strip $(USE_KLIBC)),true)
 	KLIBC_BASE	= $(PWD)/klibc
 	KLIBC_DIR	= $(KLIBC_BASE)/klibc
 	INCLUDE_DIR	:= $(KLIBC_DIR)/include
@@ -180,11 +180,11 @@ OBJS =	udev.o		\
 	$(SYSFS)	\
 	$(TDB)
 
-ifeq ($(strip $(KLIBC)),true)
+ifeq ($(strip $(USE_KLIBC)),true)
 	OBJS += klibc_fixups.o
 endif
 
-ifeq ($(DBUS), true)
+ifeq ($(USE_DBUS), true)
 	CFLAGS += -DUSE_DBUS
 	CFLAGS += $(shell pkg-config --cflags dbus-1)
 	LDFLAGS += $(shell pkg-config --libs dbus-1)
@@ -261,7 +261,7 @@ small_release: $(DISTFILES) clean
 	@echo "Built $(RELEASE_NAME).tar.gz"
 
 
-ifeq ($(DBUS), true)
+ifeq ($(USE_DBUS), true)
 install-dbus-policy:
 	$(INSTALL) -d $(DESTDIR)$(dbusdir)
 	$(INSTALL_DATA) udev_sysbus_policy.conf $(DESTDIR)$(dbusdir)
diff --git a/README b/README
index 94a39793..dab0ab41 100644
--- a/README
+++ b/README
@@ -32,18 +32,18 @@ To use:
 		installed into.  This works just like the 'configure --prefix'
 		script does.  Default value is ''.  Only override this if you
 		really know what you are doing.
-	KLIBC - if set to 'true', udev is built and linked against the included
+	USE_KLIBC - if set to 'true', udev is built and linked against the included
 		version of klibc.  Default value is 'false'.
 	DEBUG - if set to 'true', debugging messages will be sent to the syslog
 		as udev is run.  Default value is 'false'.
-	DBUS -  if set to 'true', DBUS messages will be sent everytime udev
+	USE_DBUS -  if set to 'true', DBUS messages will be sent everytime udev
 		creates or removes a device node.  This requires that DBUS
 		development headers and libraries be present on your system to
 		build properly.  Default value is 'false'.
 
       So, if you want to build udev using klibc with debugging messages, you
       would do:
-	make KLIBC=true DEBUG=true
+	make USE_KLIBC=true DEBUG=true
 
 
 - Install the project: