From: David Howells Date: Tue, 29 Aug 2006 18:06:31 +0000 (+0100) Subject: [PATCH] BLOCK: Make USB storage depend on SCSI rather than selecting it [try #6] X-Git-Tag: v2.6.19-rc1~640^2~5 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=65934a9a028b88e83e2b0f8b36618fe503349f8e;p=linux-2.6 [PATCH] BLOCK: Make USB storage depend on SCSI rather than selecting it [try #6] This makes CONFIG_USB_STORAGE depend on CONFIG_SCSI rather than selecting it, as selecting it makes CONFIG_USB_STORAGE override the dependencies of SCSI, causing it to turn on even if they aren't all met. Signed-Off-By: David Howells Signed-off-by: Jens Axboe --- diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 86e48c42d6..422a4b288e 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -8,8 +8,7 @@ comment "may also be needed; see USB_STORAGE Help for more information" config USB_STORAGE tristate "USB Mass Storage support" - depends on USB - select SCSI + depends on USB && SCSI ---help--- Say Y here if you want to connect USB mass storage devices to your computer's USB port. This is the driver you need for USB @@ -18,7 +17,7 @@ config USB_STORAGE similar devices. This driver may also be used for some cameras and card readers. - This option 'selects' (turns on, enables) 'SCSI', but you + This option depends on 'SCSI' support being enabled, but you probably also need 'SCSI device support: SCSI disk support' (BLK_DEV_SD) for most USB storage devices.