From: Andi Kleen Date: Sat, 16 Apr 2005 22:25:16 +0000 (-0700) Subject: [PATCH] x86_64: Final support for AMD dual core X-Git-Tag: v2.6.12-rc3~147 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=635186447d0e6f3b35895fda993a266a1315d2a7;p=linux-2.6 [PATCH] x86_64: Final support for AMD dual core Clean up the code greatly. Now uses the infrastructure from the Intel dual core patch Should fix a final bug noticed by Tyan of not detecting the nodes correctly in some corner cases. Patch for x86-64 and i386 Signed-off-by: Andi Kleen Signed-off-by: Rafael J. Wysocki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index fa10d0a509..8d182e875c 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -24,6 +24,9 @@ __asm__(".align 4\nvide: ret"); static void __init init_amd(struct cpuinfo_x86 *c) { +#ifdef CONFIG_SMP + int cpu = c == &boot_cpu_data ? 0 : c - cpu_data; +#endif u32 l, h; int mbytes = num_physpages >> (20-PAGE_SHIFT); int r; @@ -195,16 +198,17 @@ static void __init init_amd(struct cpuinfo_x86 *c) c->x86_num_cores = 1; } - detect_ht(c); - -#ifdef CONFIG_X86_HT - /* AMD dual core looks like HT but isn't really. Hide it from the - scheduler. This works around problems with the domain scheduler. - Also probably gives slightly better scheduling and disables - SMT nice which is harmful on dual core. - TBD tune the domain scheduler for dual core. */ - if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) - smp_num_siblings = 1; +#ifdef CONFIG_SMP + /* + * On a AMD dual core setup the lower bits of the APIC id + * distingush the cores. Assumes number of cores is a power + * of two. + */ + if (c->x86_num_cores > 1) { + cpu_core_id[cpu] = cpu >> hweight32(c->x86_num_cores - 1); + printk(KERN_INFO "CPU %d(%d) -> Core %d\n", + cpu, c->x86_num_cores, cpu_core_id[cpu]); + } #endif } diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index ed4c9c3fe6..6be0310e3c 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -437,7 +437,7 @@ void __init detect_ht(struct cpuinfo_x86 *c) int index_msb, tmp; int cpu = smp_processor_id(); - if (!cpu_has(c, X86_FEATURE_HT)) + if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) return; cpuid(1, &eax, &ebx, &ecx, &edx); diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index ef74564eed..666fe8bcca 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -715,14 +715,46 @@ static void __init display_cacheinfo(struct cpuinfo_x86 *c) } } +#ifdef CONFIG_SMP +/* + * On a AMD dual core setup the lower bits of the APIC id distingush the cores. + * Assumes number of cores is a power of two. + */ +static void __init amd_detect_cmp(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + int cpu = c->x86_apicid; + int node = 0; + if (c->x86_num_cores == 1) + return; + cpu_core_id[cpu] = cpu >> hweight32(c->x86_num_cores - 1); + +#ifdef CONFIG_NUMA + /* When an ACPI SRAT table is available use the mappings from SRAT + instead. */ + if (acpi_numa <= 0) { + node = cpu_core_id[cpu]; + if (!node_online(node)) + node = first_node(node_online_map); + cpu_to_node[cpu] = node; + } else { + node = cpu_to_node[cpu]; + } +#endif + printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n", + cpu, c->x86_num_cores, node, cpu_core_id[cpu]); +#endif +} +#else +static void __init amd_detect_cmp(struct cpuinfo_x86 *c) +{ +} +#endif static int __init init_amd(struct cpuinfo_x86 *c) { int r; int level; -#ifdef CONFIG_NUMA - int cpu; -#endif /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ @@ -750,21 +782,7 @@ static int __init init_amd(struct cpuinfo_x86 *c) if (c->x86_num_cores & (c->x86_num_cores - 1)) c->x86_num_cores = 1; -#ifdef CONFIG_NUMA - /* On a dual core setup the lower bits of apic id - distingush the cores. Fix up the CPU<->node mappings - here based on that. - Assumes number of cores is a power of two. - When using SRAT use mapping from SRAT. */ - cpu = c->x86_apicid; - if (acpi_numa <= 0 && c->x86_num_cores > 1) { - cpu_to_node[cpu] = cpu >> hweight32(c->x86_num_cores - 1); - if (!node_online(cpu_to_node[cpu])) - cpu_to_node[cpu] = first_node(node_online_map); - } - printk(KERN_INFO "CPU %d(%d) -> Node %d\n", - cpu, c->x86_num_cores, cpu_to_node[cpu]); -#endif + amd_detect_cmp(c); } return r; @@ -777,7 +795,7 @@ static void __init detect_ht(struct cpuinfo_x86 *c) int index_msb, tmp; int cpu = smp_processor_id(); - if (!cpu_has(c, X86_FEATURE_HT)) + if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) return; cpuid(1, &eax, &ebx, &ecx, &edx); @@ -819,6 +837,7 @@ static void __init detect_ht(struct cpuinfo_x86 *c) if (smp_num_siblings & (smp_num_siblings - 1)) index_msb++; + /* RED-PEN surely this must run in the non HT case too! -AK */ cpu_core_id[cpu] = phys_pkg_id(index_msb); if (c->x86_num_cores > 1) @@ -828,19 +847,6 @@ static void __init detect_ht(struct cpuinfo_x86 *c) #endif } -static void __init sched_cmp_hack(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - /* AMD dual core looks like HT but isn't really. Hide it from the - scheduler. This works around problems with the domain scheduler. - Also probably gives slightly better scheduling and disables - SMT nice which is harmful on dual core. - TBD tune the domain scheduler for dual core. */ - if (c->x86_vendor == X86_VENDOR_AMD && cpu_has(c, X86_FEATURE_CMP_LEGACY)) - smp_num_siblings = 1; -#endif -} - /* * find out the number of processor cores on the die */ @@ -1009,7 +1015,6 @@ void __init identify_cpu(struct cpuinfo_x86 *c) select_idle_routine(c); detect_ht(c); - sched_cmp_hack(c); /* * On SMP, boot_cpu_data holds the common feature set between