From: Masoud Sharbiani Date: Wed, 10 Sep 2008 20:22:34 +0000 (+0200) Subject: ide: Fix pointer arithmetic in hpt3xx driver code (3rd try) X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=62ff2ecf7a4e69f7271b7f7a57aaee76ffe610f2;p=linux-2.6 ide: Fix pointer arithmetic in hpt3xx driver code (3rd try) git commit 74811f355f4f69a187fa74892dcf2a684b84ce99 causes crash at module load (or boot) time on my machine with a hpt374 controller. The reason for this is that for initializing second controller which sets (hwif->dev == host->dev[1]) to true (1), adds 1 to a void ptr, which advances it by one byte instead of advancing it by sizeof(hpt_info) bytes. Because of this, all initialization functions get corrupted data in info variable which causes a crash at boot time. This patch fixes that and makes my machine boot again. The card itself is a HPT374 raid conroller: Here is the lspci -v output: 03:06.0 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev 07) Subsystem: HighPoint Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28 I/O ports at 8000 [size=8] I/O ports at 7800 [size=4] I/O ports at 7400 [size=8] I/O ports at 7000 [size=4] I/O ports at 6800 [size=256] Expansion ROM at fe8e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 03:06.1 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev 07) Subsystem: HighPoint Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28 I/O ports at 9800 [size=8] I/O ports at 9400 [size=4] I/O ports at 9000 [size=8] I/O ports at 8800 [size=4] I/O ports at 8400 [size=256] Capabilities: [60] Power Management version 2 Signed-off-by: Masoud Sharbiani Cc: Sergei Shtylyov Cc: Andrew Morton [bart: use dev_get_drvdata() per Sergei's suggestion] Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index eb107eef0d..c37ab17438 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -613,6 +613,14 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) return 0; } +static struct hpt_info *hpt3xx_get_info(struct device *dev) +{ + struct ide_host *host = dev_get_drvdata(dev); + struct hpt_info *info = (struct hpt_info *)host->host_priv; + + return dev == host->dev[1] ? info + 1 : info; +} + /* * The Marvell bridge chips used on the HighPoint SATA cards do not seem * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... @@ -621,9 +629,7 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) static u8 hpt3xx_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); u8 mask = hwif->ultra_mask; switch (info->chip_type) { @@ -662,9 +668,7 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive) static u8 hpt3xx_mdma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); switch (info->chip_type) { case HPT372 : @@ -700,8 +704,7 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); struct hpt_timings *t = info->timings; u8 itr_addr = 0x40 + (drive->dn * 4); u32 old_itr = 0; @@ -744,8 +747,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); if (drive->quirk_list) { if (info->chip_type >= HPT370) { @@ -973,8 +975,7 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev) { unsigned long io_base = pci_resource_start(dev, 4); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(&dev->dev); const char *name = DRV_NAME; u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */ u8 chip_type; @@ -1217,8 +1218,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev) static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); u8 chip_type = info->chip_type; u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; @@ -1262,8 +1262,7 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); int serialize = HPT_SERIALIZE_IO; u8 chip_type = info->chip_type; u8 new_mcr, old_mcr = 0;