From: Scott Wood Date: Mon, 20 Aug 2007 17:39:52 +0000 (+1000) Subject: [POWERPC] bootwrapper: Add TARGET_HAS_ETHn tests to ppcboot.h X-Git-Tag: v2.6.24-rc1~1450^2~313 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=61d3b949b70802c4f32d540b11a93128c31c67ea;p=linux-2.6 [POWERPC] bootwrapper: Add TARGET_HAS_ETHn tests to ppcboot.h U-boots more recent than when ppcboot.h was forked allow the board config file to enable additional ethernet ports explicitly, rather than using a hardcoded list of targets. This allows bootwrapper platform files to do the same. Fortunately, nothing after the ethernet addresses is of interest to cuboot platforms, so the inevitable mismatches won't be too catastrophic. Signed-off-by: Scott Wood Acked-by: David Gibson Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h index 5290ff2c2b..6ae6f90639 100644 --- a/arch/powerpc/boot/ppcboot.h +++ b/arch/powerpc/boot/ppcboot.h @@ -78,17 +78,18 @@ typedef struct bd_info { hymod_conf_t bi_hymod_conf; /* hymod configuration information */ #endif #if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ - defined(TARGET_85xx) || defined(TARGET_83xx) + defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) /* second onboard ethernet port */ unsigned char bi_enet1addr[6]; #define HAVE_ENET1ADDR #endif -#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || defined(TARGET_85xx) +#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ + defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) /* third onboard ethernet ports */ unsigned char bi_enet2addr[6]; #define HAVE_ENET2ADDR #endif -#if defined(TARGET_440GX) +#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) /* fourth onboard ethernet ports */ unsigned char bi_enet3addr[6]; #define HAVE_ENET3ADDR