From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 18 Jan 2007 17:25:23 +0000 (-0800)
Subject: e1000: fix NAPI performance on 4-port adapters
X-Git-Tag: v2.6.21-rc1~92^2~31^2~112
X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=60cba200f11b6f90f35634c5cd608773ae3721b7;p=linux-2.6

e1000: fix NAPI performance on 4-port adapters

This fix attempts to solve a customer (IBM) reported issue with NAPI
enabled e1000 having bad performance when transmitting simultaneously
on four ports.  The issue comes down to an interaction between NAPI,
hardware interrupt balancing, and the driver rescheduling poll on
the same processor.  Try to fix by allowing the driver to re-enable
interrupts sooner instead of polling one more time, when there was
recently all the work completed in cleanup.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
---

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index d408949d61..ab1b40f644 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3814,7 +3814,7 @@ e1000_intr_msi(int irq, void *data)
 
 	for (i = 0; i < E1000_MAX_INTR; i++)
 		if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
-		   !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
+		   e1000_clean_tx_irq(adapter, adapter->tx_ring)))
 			break;
 
 	if (likely(adapter->itr_setting & 3))
@@ -3917,7 +3917,7 @@ e1000_intr(int irq, void *data)
 
 	for (i = 0; i < E1000_MAX_INTR; i++)
 		if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
-		   !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
+		   e1000_clean_tx_irq(adapter, adapter->tx_ring)))
 			break;
 
 	if (likely(adapter->itr_setting & 3))
@@ -3967,7 +3967,7 @@ e1000_clean(struct net_device *poll_dev, int *budget)
 	poll_dev->quota -= work_done;
 
 	/* If no Tx and not enough Rx work done, exit the polling mode */
-	if ((!tx_cleaned && (work_done == 0)) ||
+	if ((tx_cleaned && (work_done < work_to_do)) ||
 	   !netif_running(poll_dev)) {
 quit_polling:
 		if (likely(adapter->itr_setting & 3))
@@ -3997,7 +3997,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
 #ifdef CONFIG_E1000_NAPI
 	unsigned int count = 0;
 #endif
-	boolean_t cleaned = FALSE;
+	boolean_t cleaned = TRUE;
 	unsigned int total_tx_bytes=0, total_tx_packets=0;
 
 	i = tx_ring->next_to_clean;
@@ -4028,7 +4028,10 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
 #ifdef CONFIG_E1000_NAPI
 #define E1000_TX_WEIGHT 64
 		/* weight of a sort for tx, to avoid endless transmit cleanup */
-		if (count++ == E1000_TX_WEIGHT) break;
+		if (count++ == E1000_TX_WEIGHT) {
+			cleaned = FALSE;
+			break;
+		}
 #endif
 	}