From: Andres Salomon Date: Fri, 4 Jul 2008 17:00:04 +0000 (-0700) Subject: olpc: sdhci: add quirk for the Marvell CaFe's interrupt timeout X-Git-Tag: v2.6.26-rc9~16 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=603ded16a308d0a7a17738c973e3c8cbcd5db7dd;p=linux-2.6 olpc: sdhci: add quirk for the Marvell CaFe's interrupt timeout The CaFe chip has a hardware bug that ends up with us getting a timeout value that's too small, causing the following sorts of problems: [ 60.525138] mmcblk0: error -110 transferring data [ 60.531477] end_request: I/O error, dev mmcblk0, sector 1484353 [ 60.533371] Buffer I/O error on device mmcblk0p2, logical block 181632 [ 60.533371] lost page write due to I/O error on mmcblk0p2 Presumably this is an off-by-one error in the hardware. Incrementing the timeout count value that we stuff into the TIMEOUT_CONTROL register gets us a value that works. This bug was originally discovered by Pierre Ossman, I believe. [thanks to Robert Millan for proving that this was still a problem] Signed-off-by: Andres Salomon Cc: Pierre Ossman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 5b74c8cf44..2b3f06a024 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -57,6 +57,8 @@ static unsigned int debug_quirks = 0; #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) /* Controller needs voltage and power writes to happen separately */ #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9) +/* Controller has an off-by-one issue with timeout value */ +#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<10) static const struct pci_device_id pci_ids[] __devinitdata = { { @@ -134,7 +136,8 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_MARVELL_CAFE_SD, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER, + .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | + SDHCI_QUIRK_INCR_TIMEOUT_CONTROL, }, { @@ -479,6 +482,13 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) break; } + /* + * Compensate for an off-by-one error in the CaFe hardware; otherwise, + * a too-small count gives us interrupt timeouts. + */ + if ((host->chip->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL)) + count++; + if (count >= 0xF) { printk(KERN_WARNING "%s: Too large timeout requested!\n", mmc_hostname(host->mmc));