From: Jesper Nilsson Date: Fri, 30 Nov 2007 15:01:53 +0000 (+0100) Subject: CRIS v32: Update and improve axisflashmap X-Git-Tag: v2.6.25-rc1~40^2~137 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=5fc1f3122fda1a15df0e4f83d85f4d2991bf0edd;p=linux-2.6 CRIS v32: Update and improve axisflashmap - Use default partition table when no partition is found (for initial tests) - Add config ETRAX_AXISFLASHMAP_MTD0WHOLE to allow whole flash as mtd0. - Add config for VCS simulator connection. --- diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index c5ff95e182..51e1e85df9 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -1,7 +1,7 @@ /* * Physical mapping layer for MTD using the Axis partitiontable format * - * Copyright (c) 2001, 2002, 2003 Axis Communications AB + * Copyright (c) 2001-2007 Axis Communications AB * * This file is under the GPL. * @@ -10,9 +10,6 @@ * tells us what other partitions to define. If there isn't, we use a default * partition split defined below. * - * Copy of os/lx25/arch/cris/arch-v10/drivers/axisflashmap.c 1.5 - * with minor changes. - * */ #include @@ -27,7 +24,8 @@ #include #include -#include +#include + #include #include @@ -37,16 +35,24 @@ #define FLASH_UNCACHED_ADDR KSEG_E #define FLASH_CACHED_ADDR KSEG_F +#define PAGESIZE (512) + #if CONFIG_ETRAX_FLASH_BUSWIDTH==1 #define flash_data __u8 #elif CONFIG_ETRAX_FLASH_BUSWIDTH==2 #define flash_data __u16 #elif CONFIG_ETRAX_FLASH_BUSWIDTH==4 -#define flash_data __u16 +#define flash_data __u32 #endif /* From head.S */ -extern unsigned long romfs_start, romfs_length, romfs_in_flash; +extern unsigned long romfs_in_flash; /* 1 when romfs_start, _length in flash */ +extern unsigned long romfs_start, romfs_length; +extern unsigned long nand_boot; /* 1 when booted from nand flash */ + +struct partition_name { + char name[6]; +}; /* The master mtd for the entire flash. */ struct mtd_info* axisflash_mtd = NULL; @@ -112,32 +118,20 @@ static struct map_info map_cse1 = { .map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE }; -/* If no partition-table was found, we use this default-set. */ -#define MAX_PARTITIONS 7 -#define NUM_DEFAULT_PARTITIONS 3 +#define MAX_PARTITIONS 7 +#ifdef CONFIG_ETRAX_NANDBOOT +#define NUM_DEFAULT_PARTITIONS 4 +#define DEFAULT_ROOTFS_PARTITION_NO 2 +#define DEFAULT_MEDIA_SIZE 0x2000000 /* 32 megs */ +#else +#define NUM_DEFAULT_PARTITIONS 3 +#define DEFAULT_ROOTFS_PARTITION_NO (-1) +#define DEFAULT_MEDIA_SIZE 0x800000 /* 8 megs */ +#endif -/* - * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the - * size of one flash block and "filesystem"-partition needs 5 blocks to be able - * to use JFFS. - */ -static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { - { - .name = "boot firmware", - .size = CONFIG_ETRAX_PTABLE_SECTOR, - .offset = 0 - }, - { - .name = "kernel", - .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR), - .offset = CONFIG_ETRAX_PTABLE_SECTOR - }, - { - .name = "filesystem", - .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR, - .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR) - } -}; +#if (MAX_PARTITIONS < NUM_DEFAULT_PARTITIONS) +#error MAX_PARTITIONS must be >= than NUM_DEFAULT_PARTITIONS +#endif /* Initialize the ones normally used. */ static struct mtd_partition axis_partitions[MAX_PARTITIONS] = { @@ -178,6 +172,56 @@ static struct mtd_partition axis_partitions[MAX_PARTITIONS] = { }, }; + +/* If no partition-table was found, we use this default-set. + * Default flash size is 8MB (NOR). CONFIG_ETRAX_PTABLE_SECTOR is most + * likely the size of one flash block and "filesystem"-partition needs + * to be >=5 blocks to be able to use JFFS. + */ +static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { + { + .name = "boot firmware", + .size = CONFIG_ETRAX_PTABLE_SECTOR, + .offset = 0 + }, + { + .name = "kernel", + .size = 10 * CONFIG_ETRAX_PTABLE_SECTOR, + .offset = CONFIG_ETRAX_PTABLE_SECTOR + }, +#define FILESYSTEM_SECTOR (11 * CONFIG_ETRAX_PTABLE_SECTOR) +#ifdef CONFIG_ETRAX_NANDBOOT + { + .name = "rootfs", + .size = 10 * CONFIG_ETRAX_PTABLE_SECTOR, + .offset = FILESYSTEM_SECTOR + }, +#undef FILESYSTEM_SECTOR +#define FILESYSTEM_SECTOR (21 * CONFIG_ETRAX_PTABLE_SECTOR) +#endif + { + .name = "rwfs", + .size = DEFAULT_MEDIA_SIZE - FILESYSTEM_SECTOR, + .offset = FILESYSTEM_SECTOR + } +}; + +#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE +/* Main flash device */ +static struct mtd_partition main_partition = { + .name = "main", + .size = 0, + .offset = 0 +}; +#endif + +/* Auxilliary partition if we find another flash */ +static struct mtd_partition aux_partition = { + .name = "aux", + .size = 0, + .offset = 0 +}; + /* * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash * chips in that order (because the amd_flash-driver is faster). @@ -191,7 +235,7 @@ static struct mtd_info *probe_cs(struct map_info *map_cs) map_cs->name, map_cs->size, map_cs->map_priv_1); #ifdef CONFIG_MTD_CFI - mtd_cs = do_map_probe("cfi_probe", map_cs); + mtd_cs = do_map_probe("cfi_probe", map_cs); #endif #ifdef CONFIG_MTD_JEDECPROBE if (!mtd_cs) @@ -204,7 +248,7 @@ static struct mtd_info *probe_cs(struct map_info *map_cs) /* * Probe each chip select individually for flash chips. If there are chips on * both cse0 and cse1, the mtd_info structs will be concatenated to one struct - * so that MTD partitions can cross chip boundaries. + * so that MTD partitions can cross chip boundries. * * The only known restriction to how you can mount your chips is that each * chip select must hold similar flash chips. But you need external hardware @@ -216,9 +260,8 @@ static struct mtd_info *flash_probe(void) { struct mtd_info *mtd_cse0; struct mtd_info *mtd_cse1; - struct mtd_info *mtd_nand = NULL; struct mtd_info *mtd_total; - struct mtd_info *mtds[3]; + struct mtd_info *mtds[2]; int count = 0; if ((mtd_cse0 = probe_cs(&map_cse0)) != NULL) @@ -226,12 +269,7 @@ static struct mtd_info *flash_probe(void) if ((mtd_cse1 = probe_cs(&map_cse1)) != NULL) mtds[count++] = mtd_cse1; -#ifdef CONFIG_ETRAX_NANDFLASH - if ((mtd_nand = crisv32_nand_flash_probe()) != NULL) - mtds[count++] = mtd_nand; -#endif - - if (!mtd_cse0 && !mtd_cse1 && !mtd_nand) { + if (!mtd_cse0 && !mtd_cse1) { /* No chip found. */ return NULL; } @@ -245,9 +283,7 @@ static struct mtd_info *flash_probe(void) * So we use the MTD concatenation layer instead of further * complicating the probing procedure. */ - mtd_total = mtd_concat_create(mtds, - count, - "cse0+cse1+nand"); + mtd_total = mtd_concat_create(mtds, count, "cse0+cse1"); #else printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel " "(mis)configuration!\n", map_cse0.name, map_cse1.name); @@ -255,61 +291,162 @@ static struct mtd_info *flash_probe(void) #endif if (!mtd_total) { printk(KERN_ERR "%s and %s: Concatenation failed!\n", - map_cse0.name, map_cse1.name); + map_cse0.name, map_cse1.name); /* The best we can do now is to only use what we found - * at cse0. - */ + * at cse0. */ mtd_total = mtd_cse0; map_destroy(mtd_cse1); } - } else { - mtd_total = mtd_cse0? mtd_cse0 : mtd_cse1 ? mtd_cse1 : mtd_nand; - - } + } else + mtd_total = mtd_cse0 ? mtd_cse0 : mtd_cse1; return mtd_total; } -extern unsigned long crisv32_nand_boot; -extern unsigned long crisv32_nand_cramfs_offset; - /* * Probe the flash chip(s) and, if it succeeds, read the partition-table * and register the partitions with MTD. */ static int __init init_axis_flash(void) { - struct mtd_info *mymtd; + struct mtd_info *main_mtd; + struct mtd_info *aux_mtd = NULL; int err = 0; int pidx = 0; struct partitiontable_head *ptable_head = NULL; struct partitiontable_entry *ptable; - int use_default_ptable = 1; /* Until proven otherwise. */ - const char *pmsg = KERN_INFO " /dev/flash%d at 0x%08x, size 0x%08x\n"; - static char page[512]; + int ptable_ok = 0; + static char page[PAGESIZE]; size_t len; + int ram_rootfs_partition = -1; /* -1 => no RAM rootfs partition */ + int part; + + /* We need a root fs. If it resides in RAM, we need to use an + * MTDRAM device, so it must be enabled in the kernel config, + * but its size must be configured as 0 so as not to conflict + * with our usage. + */ +#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0) + if (!romfs_in_flash && !nand_boot) { + printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " + "device; configure CONFIG_MTD_MTDRAM with size = 0!\n"); + panic("This kernel cannot boot from RAM!\n"); + } +#endif + +#ifndef CONFIG_ETRAX_VCS_SIM + main_mtd = flash_probe(); + if (main_mtd) + printk(KERN_INFO "%s: 0x%08x bytes of NOR flash memory.\n", + main_mtd->name, main_mtd->size); + +#ifdef CONFIG_ETRAX_NANDFLASH + aux_mtd = crisv32_nand_flash_probe(); + if (aux_mtd) + printk(KERN_INFO "%s: 0x%08x bytes of NAND flash memory.\n", + aux_mtd->name, aux_mtd->size); + +#ifdef CONFIG_ETRAX_NANDBOOT + { + struct mtd_info *tmp_mtd; -#ifndef CONFIG_ETRAXFS_SIM - mymtd = flash_probe(); - mymtd->read(mymtd, CONFIG_ETRAX_PTABLE_SECTOR, 512, &len, page); - ptable_head = (struct partitiontable_head *)(page + PARTITION_TABLE_OFFSET); + printk(KERN_INFO "axisflashmap: Set to boot from NAND flash, " + "making NAND flash primary device.\n"); + tmp_mtd = main_mtd; + main_mtd = aux_mtd; + aux_mtd = tmp_mtd; + } +#endif /* CONFIG_ETRAX_NANDBOOT */ +#endif /* CONFIG_ETRAX_NANDFLASH */ - if (!mymtd) { + if (!main_mtd && !aux_mtd) { /* There's no reason to use this module if no flash chip can * be identified. Make sure that's understood. */ printk(KERN_INFO "axisflashmap: Found no flash chip.\n"); - } else { - printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n", - mymtd->name, mymtd->size); - axisflash_mtd = mymtd; } - if (mymtd) { - mymtd->owner = THIS_MODULE; +#if 0 /* Dump flash memory so we can see what is going on */ + if (main_mtd) { + int sectoraddr, i; + for (sectoraddr = 0; sectoraddr < 2*65536+4096; + sectoraddr += PAGESIZE) { + main_mtd->read(main_mtd, sectoraddr, PAGESIZE, &len, + page); + printk(KERN_INFO + "Sector at %d (length %d):\n", + sectoraddr, len); + for (i = 0; i < PAGESIZE; i += 16) { + printk(KERN_INFO + "%02x %02x %02x %02x " + "%02x %02x %02x %02x " + "%02x %02x %02x %02x " + "%02x %02x %02x %02x\n", + page[i] & 255, page[i+1] & 255, + page[i+2] & 255, page[i+3] & 255, + page[i+4] & 255, page[i+5] & 255, + page[i+6] & 255, page[i+7] & 255, + page[i+8] & 255, page[i+9] & 255, + page[i+10] & 255, page[i+11] & 255, + page[i+12] & 255, page[i+13] & 255, + page[i+14] & 255, page[i+15] & 255); + } + } + } +#endif + + if (main_mtd) { + main_mtd->owner = THIS_MODULE; + axisflash_mtd = main_mtd; + + loff_t ptable_sector = CONFIG_ETRAX_PTABLE_SECTOR; + + /* First partition (rescue) is always set to the default. */ + pidx++; +#ifdef CONFIG_ETRAX_NANDBOOT + /* We know where the partition table should be located, + * it will be in first good block after that. + */ + int blockstat; + do { + blockstat = main_mtd->block_isbad(main_mtd, + ptable_sector); + if (blockstat < 0) + ptable_sector = 0; /* read error */ + else if (blockstat) + ptable_sector += main_mtd->erasesize; + } while (blockstat && ptable_sector); +#endif + if (ptable_sector) { + main_mtd->read(main_mtd, ptable_sector, PAGESIZE, + &len, page); + ptable_head = &((struct partitiontable *) page)->head; + } + +#if 0 /* Dump partition table so we can see what is going on */ + printk(KERN_INFO + "axisflashmap: flash read %d bytes at 0x%08x, data: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + len, CONFIG_ETRAX_PTABLE_SECTOR, + page[0] & 255, page[1] & 255, + page[2] & 255, page[3] & 255, + page[4] & 255, page[5] & 255, + page[6] & 255, page[7] & 255); + printk(KERN_INFO + "axisflashmap: partition table offset %d, data: " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + PARTITION_TABLE_OFFSET, + page[PARTITION_TABLE_OFFSET+0] & 255, + page[PARTITION_TABLE_OFFSET+1] & 255, + page[PARTITION_TABLE_OFFSET+2] & 255, + page[PARTITION_TABLE_OFFSET+3] & 255, + page[PARTITION_TABLE_OFFSET+4] & 255, + page[PARTITION_TABLE_OFFSET+5] & 255, + page[PARTITION_TABLE_OFFSET+6] & 255, + page[PARTITION_TABLE_OFFSET+7] & 255); +#endif } - pidx++; /* First partition is always set to the default. */ if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC) && (ptable_head->size < @@ -322,7 +459,6 @@ static int __init init_axis_flash(void) /* Looks like a start, sane length and end of a * partition table, lets check csum etc. */ - int ptable_ok = 0; struct partitiontable_entry *max_addr = (struct partitiontable_entry *) ((unsigned long)ptable_head + sizeof(*ptable_head) + @@ -346,104 +482,170 @@ static int __init init_axis_flash(void) ptable_ok = (csum == ptable_head->checksum); /* Read the entries and use/show the info. */ - printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n", + printk(KERN_INFO "axisflashmap: " + "Found a%s partition table at 0x%p-0x%p.\n", (ptable_ok ? " valid" : "n invalid"), ptable_head, max_addr); /* We have found a working bootblock. Now read the - * partition table. Scan the table. It ends when - * there is 0xffffffff, that is, empty flash. + * partition table. Scan the table. It ends with 0xffffffff. */ while (ptable_ok - && ptable->offset != 0xffffffff + && ptable->offset != PARTITIONTABLE_END_MARKER && ptable < max_addr - && pidx < MAX_PARTITIONS) { + && pidx < MAX_PARTITIONS - 1) { - axis_partitions[pidx].offset = offset + ptable->offset + (crisv32_nand_boot ? 16384 : 0); - axis_partitions[pidx].size = ptable->size; - - printk(pmsg, pidx, axis_partitions[pidx].offset, - axis_partitions[pidx].size); + axis_partitions[pidx].offset = offset + ptable->offset; +#ifdef CONFIG_ETRAX_NANDFLASH + if (main_mtd->type == MTD_NANDFLASH) { + axis_partitions[pidx].size = + (((ptable+1)->offset == + PARTITIONTABLE_END_MARKER) ? + main_mtd->size : + ((ptable+1)->offset + offset)) - + (ptable->offset + offset); + + } else +#endif /* CONFIG_ETRAX_NANDFLASH */ + axis_partitions[pidx].size = ptable->size; +#ifdef CONFIG_ETRAX_NANDBOOT + /* Save partition number of jffs2 ro partition. + * Needed if RAM booting or root file system in RAM. + */ + if (!nand_boot && + ram_rootfs_partition < 0 && /* not already set */ + ptable->type == PARTITION_TYPE_JFFS2 && + (ptable->flags & PARTITION_FLAGS_READONLY_MASK) == + PARTITION_FLAGS_READONLY) + ram_rootfs_partition = pidx; +#endif /* CONFIG_ETRAX_NANDBOOT */ pidx++; ptable++; } - use_default_ptable = !ptable_ok; } - if (romfs_in_flash) { - /* Add an overlapping device for the root partition (romfs). */ + /* Decide whether to use default partition table. */ + /* Only use default table if we actually have a device (main_mtd) */ - axis_partitions[pidx].name = "romfs"; - if (crisv32_nand_boot) { - char* data = kmalloc(1024, GFP_KERNEL); - int len; - int offset = crisv32_nand_cramfs_offset & ~(1024-1); - char* tmp; - - mymtd->read(mymtd, offset, 1024, &len, data); - tmp = &data[crisv32_nand_cramfs_offset % 512]; - axis_partitions[pidx].size = *(unsigned*)(tmp + 4); - axis_partitions[pidx].offset = crisv32_nand_cramfs_offset; - kfree(data); - } else { - axis_partitions[pidx].size = romfs_length; - axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; - } + struct mtd_partition *partition = &axis_partitions[0]; + if (main_mtd && !ptable_ok) { + memcpy(axis_partitions, axis_default_partitions, + sizeof(axis_default_partitions)); + pidx = NUM_DEFAULT_PARTITIONS; + ram_rootfs_partition = DEFAULT_ROOTFS_PARTITION_NO; + } + /* Add artificial partitions for rootfs if necessary */ + if (romfs_in_flash) { + /* rootfs is in directly accessible flash memory = NOR flash. + Add an overlapping device for the rootfs partition. */ + printk(KERN_INFO "axisflashmap: Adding partition for " + "overlapping root file system image\n"); + axis_partitions[pidx].size = romfs_length; + axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; + axis_partitions[pidx].name = "romfs"; axis_partitions[pidx].mask_flags |= MTD_WRITEABLE; - - printk(KERN_INFO - " Adding readonly flash partition for romfs image:\n"); - printk(pmsg, pidx, axis_partitions[pidx].offset, - axis_partitions[pidx].size); + ram_rootfs_partition = -1; pidx++; - } - - if (mymtd) { - if (use_default_ptable) { - printk(KERN_INFO " Using default partition table.\n"); - err = add_mtd_partitions(mymtd, axis_default_partitions, - NUM_DEFAULT_PARTITIONS); - } else { - err = add_mtd_partitions(mymtd, axis_partitions, pidx); + } else if (romfs_length && !nand_boot) { + /* romfs exists in memory, but not in flash, so must be in RAM. + * Configure an MTDRAM partition. */ + if (ram_rootfs_partition < 0) { + /* None set yet, put it at the end */ + ram_rootfs_partition = pidx; + pidx++; } + printk(KERN_INFO "axisflashmap: Adding partition for " + "root file system image in RAM\n"); + axis_partitions[ram_rootfs_partition].size = romfs_length; + axis_partitions[ram_rootfs_partition].offset = romfs_start; + axis_partitions[ram_rootfs_partition].name = "romfs"; + axis_partitions[ram_rootfs_partition].mask_flags |= + MTD_WRITEABLE; + } - if (err) { - panic("axisflashmap could not add MTD partitions!\n"); - } +#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE + if (main_mtd) { + main_partition.size = main_mtd->size; + err = add_mtd_partitions(main_mtd, &main_partition, 1); + if (err) + panic("axisflashmap: Could not initialize " + "partition for whole main mtd device!\n"); } -/* CONFIG_EXTRAXFS_SIM */ #endif - if (!romfs_in_flash) { - /* Create an RAM device for the root partition (romfs). */ + /* Now, register all partitions with mtd. + * We do this one at a time so we can slip in an MTDRAM device + * in the proper place if required. */ + + for (part = 0; part < pidx; part++) { + if (part == ram_rootfs_partition) { + /* add MTDRAM partition here */ + struct mtd_info *mtd_ram; + + mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!mtd_ram) + panic("axisflashmap: Couldn't allocate memory " + "for mtd_info!\n"); + printk(KERN_INFO "axisflashmap: Adding RAM partition " + "for rootfs image.\n"); + err = mtdram_init_device(mtd_ram, + (void *)partition[part].offset, + partition[part].size, + partition[part].name); + if (err) + panic("axisflashmap: Could not initialize " + "MTD RAM device!\n"); + /* JFFS2 likes to have an erasesize. Keep potential + * JFFS2 rootfs happy by providing one. Since image + * was most likely created for main mtd, use that + * erasesize, if available. Otherwise, make a guess. */ + mtd_ram->erasesize = (main_mtd ? main_mtd->erasesize : + CONFIG_ETRAX_PTABLE_SECTOR); + } else { + err = add_mtd_partitions(main_mtd, &partition[part], 1); + if (err) + panic("axisflashmap: Could not add mtd " + "partition %d\n", part); + } + } +#endif /* CONFIG_EXTRAX_VCS_SIM */ + +#ifdef CONFIG_ETRAX_VCS_SIM + /* For simulator, always use a RAM partition. + * The rootfs will be found after the kernel in RAM, + * with romfs_start and romfs_end indicating location and size. + */ + struct mtd_info *mtd_ram; + + mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!mtd_ram) { + panic("axisflashmap: Couldn't allocate memory for " + "mtd_info!\n"); + } -#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0) - /* No use trying to boot this kernel from RAM. Panic! */ - printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " - "device due to kernel (mis)configuration!\n"); - panic("This kernel cannot boot from RAM!\n"); -#else - struct mtd_info *mtd_ram; + printk(KERN_INFO "axisflashmap: Adding RAM partition for romfs, " + "at %u, size %u\n", + (unsigned) romfs_start, (unsigned) romfs_length); - mtd_ram = kmalloc(sizeof(struct mtd_info), - GFP_KERNEL); - if (!mtd_ram) { - panic("axisflashmap couldn't allocate memory for " - "mtd_info!\n"); - } + err = mtdram_init_device(mtd_ram, (void *)romfs_start, + romfs_length, "romfs"); + if (err) { + panic("axisflashmap: Could not initialize MTD RAM " + "device!\n"); + } +#endif /* CONFIG_EXTRAX_VCS_SIM */ - printk(KERN_INFO " Adding RAM partition for romfs image:\n"); - printk(pmsg, pidx, romfs_start, romfs_length); +#ifndef CONFIG_ETRAX_VCS_SIM + if (aux_mtd) { + aux_partition.size = aux_mtd->size; + err = add_mtd_partitions(aux_mtd, &aux_partition, 1); + if (err) + panic("axisflashmap: Could not initialize " + "aux mtd device!\n"); - err = mtdram_init_device(mtd_ram, (void*)romfs_start, - romfs_length, "romfs"); - if (err) { - panic("axisflashmap could not initialize MTD RAM " - "device!\n"); - } -#endif } +#endif /* CONFIG_EXTRAX_VCS_SIM */ return err; }