From: Linas Vepstas Date: Fri, 4 Nov 2005 00:53:07 +0000 (-0600) Subject: [PATCH] powerpc: Split out PCI address cache to its own file X-Git-Tag: v2.6.16-rc1~473^2~17 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=5d5a0936b3ad9e3d3f6eaf61f1a06c62ea0e7a59;p=linux-2.6 [PATCH] powerpc: Split out PCI address cache to its own file 25-pci-address-cache.patch The core EEH file is rather large. This patch splits out a self-contained chunk of it into its own file. This is the chunk that performes the caching and lookup of pci devices based on the i/o addresses of thier resoures. This code is almos architecture-independent and could be used by any system that wanted to find a pci device based only on the i/o address used by the device. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras (cherry picked from b0b291d59906d4a9a89ed9e34d9fd684c7188924 commit) --- diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 0b7d5cb641..61616d1440 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_EEH) += eeh.o eeh_driver.o eeh_event.o +obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_HVCS) += hvcserver.o diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index d6560c4563..57bef2c2f3 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -76,9 +76,6 @@ */ #define EEH_MAX_FAILS 100000 -/* Misc forward declaraions */ -static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn); - /* RTAS tokens */ static int ibm_set_eeh_option; static int ibm_set_slot_reset; @@ -107,296 +104,8 @@ static DEFINE_PER_CPU(unsigned long, false_positives); static DEFINE_PER_CPU(unsigned long, ignored_failures); static DEFINE_PER_CPU(unsigned long, slot_resets); -/** - * The pci address cache subsystem. This subsystem places - * PCI device address resources into a red-black tree, sorted - * according to the address range, so that given only an i/o - * address, the corresponding PCI device can be **quickly** - * found. It is safe to perform an address lookup in an interrupt - * context; this ability is an important feature. - * - * Currently, the only customer of this code is the EEH subsystem; - * thus, this code has been somewhat tailored to suit EEH better. - * In particular, the cache does *not* hold the addresses of devices - * for which EEH is not enabled. - * - * (Implementation Note: The RB tree seems to be better/faster - * than any hash algo I could think of for this problem, even - * with the penalty of slow pointer chases for d-cache misses). - */ -struct pci_io_addr_range -{ - struct rb_node rb_node; - unsigned long addr_lo; - unsigned long addr_hi; - struct pci_dev *pcidev; - unsigned int flags; -}; - -static struct pci_io_addr_cache -{ - struct rb_root rb_root; - spinlock_t piar_lock; -} pci_io_addr_cache_root; - -static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr) -{ - struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node; - - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - - if (addr < piar->addr_lo) { - n = n->rb_left; - } else { - if (addr > piar->addr_hi) { - n = n->rb_right; - } else { - pci_dev_get(piar->pcidev); - return piar->pcidev; - } - } - } - - return NULL; -} - -/** - * pci_get_device_by_addr - Get device, given only address - * @addr: mmio (PIO) phys address or i/o port number - * - * Given an mmio phys address, or a port number, find a pci device - * that implements this address. Be sure to pci_dev_put the device - * when finished. I/O port numbers are assumed to be offset - * from zero (that is, they do *not* have pci_io_addr added in). - * It is safe to call this function within an interrupt. - */ -static struct pci_dev *pci_get_device_by_addr(unsigned long addr) -{ - struct pci_dev *dev; - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - dev = __pci_get_device_by_addr(addr); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); - return dev; -} - -#ifdef DEBUG -/* - * Handy-dandy debug print routine, does nothing more - * than print out the contents of our addr cache. - */ -static void pci_addr_cache_print(struct pci_io_addr_cache *cache) -{ - struct rb_node *n; - int cnt = 0; - - n = rb_first(&cache->rb_root); - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n", - (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt, - piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev)); - cnt++; - n = rb_next(n); - } -} -#endif - -/* Insert address range into the rb tree. */ -static struct pci_io_addr_range * -pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, - unsigned long ahi, unsigned int flags) -{ - struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node; - struct rb_node *parent = NULL; - struct pci_io_addr_range *piar; - - /* Walk tree, find a place to insert into tree */ - while (*p) { - parent = *p; - piar = rb_entry(parent, struct pci_io_addr_range, rb_node); - if (ahi < piar->addr_lo) { - p = &parent->rb_left; - } else if (alo > piar->addr_hi) { - p = &parent->rb_right; - } else { - if (dev != piar->pcidev || - alo != piar->addr_lo || ahi != piar->addr_hi) { - printk(KERN_WARNING "PIAR: overlapping address range\n"); - } - return piar; - } - } - piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC); - if (!piar) - return NULL; - - piar->addr_lo = alo; - piar->addr_hi = ahi; - piar->pcidev = dev; - piar->flags = flags; - -#ifdef DEBUG - printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n", - alo, ahi, pci_name (dev)); -#endif - - rb_link_node(&piar->rb_node, parent, p); - rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); - - return piar; -} - -static void __pci_addr_cache_insert_device(struct pci_dev *dev) -{ - struct device_node *dn; - struct pci_dn *pdn; - int i; - int inserted = 0; - - dn = pci_device_to_OF_node(dev); - if (!dn) { - printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev)); - return; - } - - /* Skip any devices for which EEH is not enabled. */ - pdn = PCI_DN(dn); - if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || - pdn->eeh_mode & EEH_MODE_NOCHECK) { -#ifdef DEBUG - printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n", - pci_name(dev), pdn->node->full_name); -#endif - return; - } - - /* The cache holds a reference to the device... */ - pci_dev_get(dev); - - /* Walk resources on this device, poke them into the tree */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - unsigned long start = pci_resource_start(dev,i); - unsigned long end = pci_resource_end(dev,i); - unsigned int flags = pci_resource_flags(dev,i); - - /* We are interested only bus addresses, not dma or other stuff */ - if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM))) - continue; - if (start == 0 || ~start == 0 || end == 0 || ~end == 0) - continue; - pci_addr_cache_insert(dev, start, end, flags); - inserted = 1; - } - - /* If there was nothing to add, the cache has no reference... */ - if (!inserted) - pci_dev_put(dev); -} - -/** - * pci_addr_cache_insert_device - Add a device to the address cache - * @dev: PCI device whose I/O addresses we are interested in. - * - * In order to support the fast lookup of devices based on addresses, - * we maintain a cache of devices that can be quickly searched. - * This routine adds a device to that cache. - */ -static void pci_addr_cache_insert_device(struct pci_dev *dev) -{ - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - __pci_addr_cache_insert_device(dev); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); -} - -static inline void __pci_addr_cache_remove_device(struct pci_dev *dev) -{ - struct rb_node *n; - int removed = 0; - -restart: - n = rb_first(&pci_io_addr_cache_root.rb_root); - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - - if (piar->pcidev == dev) { - rb_erase(n, &pci_io_addr_cache_root.rb_root); - removed = 1; - kfree(piar); - goto restart; - } - n = rb_next(n); - } - - /* The cache no longer holds its reference to this device... */ - if (removed) - pci_dev_put(dev); -} - -/** - * pci_addr_cache_remove_device - remove pci device from addr cache - * @dev: device to remove - * - * Remove a device from the addr-cache tree. - * This is potentially expensive, since it will walk - * the tree multiple times (once per resource). - * But so what; device removal doesn't need to be that fast. - */ -static void pci_addr_cache_remove_device(struct pci_dev *dev) -{ - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - __pci_addr_cache_remove_device(dev); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); -} - -/** - * pci_addr_cache_build - Build a cache of I/O addresses - * - * Build a cache of pci i/o addresses. This cache will be used to - * find the pci device that corresponds to a given address. - * This routine scans all pci busses to build the cache. - * Must be run late in boot process, after the pci controllers - * have been scaned for devices (after all device resources are known). - */ -void __init pci_addr_cache_build(void) -{ - struct device_node *dn; - struct pci_dev *dev = NULL; - - if (!eeh_subsystem_enabled) - return; - - spin_lock_init(&pci_io_addr_cache_root.piar_lock); - - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - /* Ignore PCI bridges ( XXX why ??) */ - if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) { - continue; - } - pci_addr_cache_insert_device(dev); - - /* Save the BAR's; firmware doesn't restore these after EEH reset */ - dn = pci_device_to_OF_node(dev); - eeh_save_bars(dev, PCI_DN(dn)); - } - -#ifdef DEBUG - /* Verify tree built up above, echo back the list of addrs. */ - pci_addr_cache_print(&pci_io_addr_cache_root); -#endif -} - /* --------------------------------------------------------------- */ -/* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */ +/* Below lies the EEH event infrastructure */ void eeh_slot_error_detail (struct pci_dn *pdn, int severity) { @@ -880,7 +589,7 @@ void eeh_restore_bars(struct pci_dn *pdn) * PCI devices are added individuallly; but, for the restore, * an entire slot is reset at a time. */ -static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn) +void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn) { int i; diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c new file mode 100644 index 0000000000..9fe2a7de04 --- /dev/null +++ b/arch/powerpc/platforms/pseries/eeh_cache.c @@ -0,0 +1,317 @@ +/* + * eeh_cache.c + * PCI address cache; allows the lookup of PCI devices based on I/O address + * + * Copyright (C) 2004 Linas Vepstas IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#undef DEBUG + +/** + * The pci address cache subsystem. This subsystem places + * PCI device address resources into a red-black tree, sorted + * according to the address range, so that given only an i/o + * address, the corresponding PCI device can be **quickly** + * found. It is safe to perform an address lookup in an interrupt + * context; this ability is an important feature. + * + * Currently, the only customer of this code is the EEH subsystem; + * thus, this code has been somewhat tailored to suit EEH better. + * In particular, the cache does *not* hold the addresses of devices + * for which EEH is not enabled. + * + * (Implementation Note: The RB tree seems to be better/faster + * than any hash algo I could think of for this problem, even + * with the penalty of slow pointer chases for d-cache misses). + */ +struct pci_io_addr_range +{ + struct rb_node rb_node; + unsigned long addr_lo; + unsigned long addr_hi; + struct pci_dev *pcidev; + unsigned int flags; +}; + +static struct pci_io_addr_cache +{ + struct rb_root rb_root; + spinlock_t piar_lock; +} pci_io_addr_cache_root; + +static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr) +{ + struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node; + + while (n) { + struct pci_io_addr_range *piar; + piar = rb_entry(n, struct pci_io_addr_range, rb_node); + + if (addr < piar->addr_lo) { + n = n->rb_left; + } else { + if (addr > piar->addr_hi) { + n = n->rb_right; + } else { + pci_dev_get(piar->pcidev); + return piar->pcidev; + } + } + } + + return NULL; +} + +/** + * pci_get_device_by_addr - Get device, given only address + * @addr: mmio (PIO) phys address or i/o port number + * + * Given an mmio phys address, or a port number, find a pci device + * that implements this address. Be sure to pci_dev_put the device + * when finished. I/O port numbers are assumed to be offset + * from zero (that is, they do *not* have pci_io_addr added in). + * It is safe to call this function within an interrupt. + */ +struct pci_dev *pci_get_device_by_addr(unsigned long addr) +{ + struct pci_dev *dev; + unsigned long flags; + + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); + dev = __pci_get_device_by_addr(addr); + spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); + return dev; +} + +#ifdef DEBUG +/* + * Handy-dandy debug print routine, does nothing more + * than print out the contents of our addr cache. + */ +static void pci_addr_cache_print(struct pci_io_addr_cache *cache) +{ + struct rb_node *n; + int cnt = 0; + + n = rb_first(&cache->rb_root); + while (n) { + struct pci_io_addr_range *piar; + piar = rb_entry(n, struct pci_io_addr_range, rb_node); + printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n", + (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt, + piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev)); + cnt++; + n = rb_next(n); + } +} +#endif + +/* Insert address range into the rb tree. */ +static struct pci_io_addr_range * +pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, + unsigned long ahi, unsigned int flags) +{ + struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node; + struct rb_node *parent = NULL; + struct pci_io_addr_range *piar; + + /* Walk tree, find a place to insert into tree */ + while (*p) { + parent = *p; + piar = rb_entry(parent, struct pci_io_addr_range, rb_node); + if (ahi < piar->addr_lo) { + p = &parent->rb_left; + } else if (alo > piar->addr_hi) { + p = &parent->rb_right; + } else { + if (dev != piar->pcidev || + alo != piar->addr_lo || ahi != piar->addr_hi) { + printk(KERN_WARNING "PIAR: overlapping address range\n"); + } + return piar; + } + } + piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC); + if (!piar) + return NULL; + + piar->addr_lo = alo; + piar->addr_hi = ahi; + piar->pcidev = dev; + piar->flags = flags; + +#ifdef DEBUG + printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n", + alo, ahi, pci_name (dev)); +#endif + + rb_link_node(&piar->rb_node, parent, p); + rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); + + return piar; +} + +static void __pci_addr_cache_insert_device(struct pci_dev *dev) +{ + struct device_node *dn; + struct pci_dn *pdn; + int i; + int inserted = 0; + + dn = pci_device_to_OF_node(dev); + if (!dn) { + printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev)); + return; + } + + /* Skip any devices for which EEH is not enabled. */ + pdn = PCI_DN(dn); + if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || + pdn->eeh_mode & EEH_MODE_NOCHECK) { +#ifdef DEBUG + printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n", + pci_name(dev), pdn->node->full_name); +#endif + return; + } + + /* The cache holds a reference to the device... */ + pci_dev_get(dev); + + /* Walk resources on this device, poke them into the tree */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + unsigned long start = pci_resource_start(dev,i); + unsigned long end = pci_resource_end(dev,i); + unsigned int flags = pci_resource_flags(dev,i); + + /* We are interested only bus addresses, not dma or other stuff */ + if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM))) + continue; + if (start == 0 || ~start == 0 || end == 0 || ~end == 0) + continue; + pci_addr_cache_insert(dev, start, end, flags); + inserted = 1; + } + + /* If there was nothing to add, the cache has no reference... */ + if (!inserted) + pci_dev_put(dev); +} + +/** + * pci_addr_cache_insert_device - Add a device to the address cache + * @dev: PCI device whose I/O addresses we are interested in. + * + * In order to support the fast lookup of devices based on addresses, + * we maintain a cache of devices that can be quickly searched. + * This routine adds a device to that cache. + */ +void pci_addr_cache_insert_device(struct pci_dev *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); + __pci_addr_cache_insert_device(dev); + spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); +} + +static inline void __pci_addr_cache_remove_device(struct pci_dev *dev) +{ + struct rb_node *n; + int removed = 0; + +restart: + n = rb_first(&pci_io_addr_cache_root.rb_root); + while (n) { + struct pci_io_addr_range *piar; + piar = rb_entry(n, struct pci_io_addr_range, rb_node); + + if (piar->pcidev == dev) { + rb_erase(n, &pci_io_addr_cache_root.rb_root); + removed = 1; + kfree(piar); + goto restart; + } + n = rb_next(n); + } + + /* The cache no longer holds its reference to this device... */ + if (removed) + pci_dev_put(dev); +} + +/** + * pci_addr_cache_remove_device - remove pci device from addr cache + * @dev: device to remove + * + * Remove a device from the addr-cache tree. + * This is potentially expensive, since it will walk + * the tree multiple times (once per resource). + * But so what; device removal doesn't need to be that fast. + */ +void pci_addr_cache_remove_device(struct pci_dev *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); + __pci_addr_cache_remove_device(dev); + spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); +} + +/** + * pci_addr_cache_build - Build a cache of I/O addresses + * + * Build a cache of pci i/o addresses. This cache will be used to + * find the pci device that corresponds to a given address. + * This routine scans all pci busses to build the cache. + * Must be run late in boot process, after the pci controllers + * have been scaned for devices (after all device resources are known). + */ +void __init pci_addr_cache_build(void) +{ + struct device_node *dn; + struct pci_dev *dev = NULL; + + spin_lock_init(&pci_io_addr_cache_root.piar_lock); + + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + /* Ignore PCI bridges */ + if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) + continue; + + pci_addr_cache_insert_device(dev); + + /* Save the BAR's; firmware doesn't restore these after EEH reset */ + dn = pci_device_to_OF_node(dev); + eeh_save_bars(dev, PCI_DN(dn)); + } + +#ifdef DEBUG + /* Verify tree built up above, echo back the list of addrs. */ + pci_addr_cache_print(&pci_io_addr_cache_root); +#endif +} + diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index caf67a3bcb..79239a200f 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -52,6 +52,14 @@ extern unsigned long pci_probe_only; /* ---- EEH internal-use-only related routines ---- */ #ifdef CONFIG_EEH + +void pci_addr_cache_insert_device(struct pci_dev *dev); +void pci_addr_cache_remove_device(struct pci_dev *dev); +void pci_addr_cache_build(void); +struct pci_dev *pci_get_device_by_addr(unsigned long addr); + +void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn); + /** * eeh_slot_error_detail -- record and EEH error condition to the log * @severity: 1 if temporary, 2 if permanent failure.