From: Alan Stern Date: Mon, 30 Jul 2007 21:04:37 +0000 (-0400) Subject: USB: add urb->ep X-Git-Tag: v2.6.24-rc1~1395^2~133 X-Git-Url: https://err.no/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=5b653c79c04c6b152b8dc7d18f8c8a7f77f4b235;p=linux-2.6 USB: add urb->ep This patch (as943) prepares the way for eliminating urb->pipe by introducing an endpoint pointer into struct urb. For now urb->ep is set by usb_submit_urb() from the pipe value; eventually drivers will set it themselves and we will remove urb->pipe completely. The patch also adds new inline routines to retrieve an endpoint descriptor's number and transfer type, essentially as replacements for usb_pipeendpoint and usb_pipetype. usb_submit_urb(), usb_hcd_submit_urb(), and usb_hcd_unlink_urb() are converted to use the new field and new routines. Other parts of usbcore will be converted in later patches. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 42ef1d5f6c..fb82c500ca 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -962,14 +962,14 @@ int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags) spin_lock_irqsave(&hcd_urb_list_lock, flags); ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out) [usb_pipeendpoint(urb->pipe)]; - if (unlikely (!ep)) + if (unlikely(ep != urb->ep)) status = -ENOENT; else if (unlikely (urb->reject)) status = -EPERM; else switch (hcd->state) { case HC_STATE_RUNNING: case HC_STATE_RESUMING: - list_add_tail (&urb->urb_list, &ep->urb_list); + list_add_tail (&urb->urb_list, &urb->ep->urb_list); status = 0; break; default: @@ -1022,7 +1022,7 @@ int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags) : DMA_TO_DEVICE); } - status = hcd->driver->urb_enqueue (hcd, ep, urb, mem_flags); + status = hcd->driver->urb_enqueue (hcd, urb->ep, urb, mem_flags); done: if (unlikely (status)) { urb_unlink(hcd, urb); @@ -1071,7 +1071,6 @@ unlink1 (struct usb_hcd *hcd, struct urb *urb) */ int usb_hcd_unlink_urb (struct urb *urb, int status) { - struct usb_host_endpoint *ep; struct usb_hcd *hcd = NULL; struct device *sys = NULL; unsigned long flags; @@ -1082,10 +1081,6 @@ int usb_hcd_unlink_urb (struct urb *urb, int status) return -EINVAL; if (!urb->dev || !urb->dev->bus) return -ENODEV; - ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out) - [usb_pipeendpoint(urb->pipe)]; - if (!ep) - return -ENODEV; /* * we contend for urb->status with the hcd core, @@ -1109,7 +1104,7 @@ int usb_hcd_unlink_urb (struct urb *urb, int status) } /* insist the urb is still queued */ - list_for_each(tmp, &ep->urb_list) { + list_for_each(tmp, &urb->ep->urb_list) { if (tmp == &urb->urb_list) break; } diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index be63022846..ff53acb4fa 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -277,9 +277,10 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb); */ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) { - int pipe, temp, max; - struct usb_device *dev; - int is_out; + int xfertype, max; + struct usb_device *dev; + struct usb_host_endpoint *ep; + int is_out; if (!urb || urb->hcpriv || !urb->complete) return -EINVAL; @@ -291,30 +292,34 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) || dev->state == USB_STATE_SUSPENDED) return -EHOSTUNREACH; + /* For now, get the endpoint from the pipe. Eventually drivers + * will be required to set urb->ep directly and we will eliminate + * urb->pipe. + */ + ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out) + [usb_pipeendpoint(urb->pipe)]; + if (!ep) + return -ENOENT; + + urb->ep = ep; urb->status = -EINPROGRESS; urb->actual_length = 0; /* Lots of sanity checks, so HCDs can rely on clean data * and don't need to duplicate tests */ - pipe = urb->pipe; - temp = usb_pipetype(pipe); - is_out = usb_pipeout(pipe); + xfertype = usb_endpoint_type(&ep->desc); + is_out = usb_pipeout(urb->pipe); - if (!usb_pipecontrol(pipe) && dev->state < USB_STATE_CONFIGURED) + if (xfertype != USB_ENDPOINT_XFER_CONTROL && + dev->state < USB_STATE_CONFIGURED) return -ENODEV; - /* FIXME there should be a sharable lock protecting us against - * config/altsetting changes and disconnects, kicking in here. - * (here == before maxpacket, and eventually endpoint type, - * checks get made.) - */ - - max = usb_maxpacket(dev, pipe, is_out); + max = le16_to_cpu(ep->desc.wMaxPacketSize); if (max <= 0) { dev_dbg(&dev->dev, "bogus endpoint ep%d%s in %s (bad maxpacket %d)\n", - usb_pipeendpoint(pipe), is_out ? "out" : "in", + usb_endpoint_num(&ep->desc), is_out ? "out" : "in", __FUNCTION__, max); return -EMSGSIZE; } @@ -323,7 +328,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) * but drivers only control those sizes for ISO. * while we're checking, initialize return status. */ - if (temp == PIPE_ISOCHRONOUS) { + if (xfertype == USB_ENDPOINT_XFER_ISOC) { int n, len; /* "high bandwidth" mode, 1-3 packets/uframe? */ @@ -359,19 +364,19 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) /* enforce simple/standard policy */ allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP | URB_NO_INTERRUPT); - switch (temp) { - case PIPE_BULK: + switch (xfertype) { + case USB_ENDPOINT_XFER_BULK: if (is_out) allowed |= URB_ZERO_PACKET; /* FALLTHROUGH */ - case PIPE_CONTROL: + case USB_ENDPOINT_XFER_CONTROL: allowed |= URB_NO_FSBR; /* only affects UHCI */ /* FALLTHROUGH */ default: /* all non-iso endpoints */ if (!is_out) allowed |= URB_SHORT_NOT_OK; break; - case PIPE_ISOCHRONOUS: + case USB_ENDPOINT_XFER_ISOC: allowed |= URB_ISO_ASAP; break; } @@ -393,9 +398,9 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) * supports different values... this uses EHCI/UHCI defaults (and * EHCI can use smaller non-default values). */ - switch (temp) { - case PIPE_ISOCHRONOUS: - case PIPE_INTERRUPT: + switch (xfertype) { + case USB_ENDPOINT_XFER_ISOC: + case USB_ENDPOINT_XFER_INT: /* too small? */ if (urb->interval <= 0) return -EINVAL; @@ -405,29 +410,29 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) // NOTE usb handles 2^15 if (urb->interval > (1024 * 8)) urb->interval = 1024 * 8; - temp = 1024 * 8; + max = 1024 * 8; break; case USB_SPEED_FULL: /* units are frames/msec */ case USB_SPEED_LOW: - if (temp == PIPE_INTERRUPT) { + if (xfertype == USB_ENDPOINT_XFER_INT) { if (urb->interval > 255) return -EINVAL; // NOTE ohci only handles up to 32 - temp = 128; + max = 128; } else { if (urb->interval > 1024) urb->interval = 1024; // NOTE usb and ohci handle up to 2^15 - temp = 1024; + max = 1024; } break; default: return -EINVAL; } /* power of two? */ - while (temp > urb->interval) - temp >>= 1; - urb->interval = temp; + while (max > urb->interval) + max >>= 1; + urb->interval = max; } return usb_hcd_submit_urb(urb, mem_flags); diff --git a/include/linux/usb.h b/include/linux/usb.h index 4f33a58fa9..105e3e9362 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -554,6 +554,29 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, /*-------------------------------------------------------------------------*/ +/** + * usb_endpoint_num - get the endpoint's number + * @epd: endpoint to be checked + * + * Returns @epd's number: 0 to 15. + */ +static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) +{ + return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; +} + +/** + * usb_endpoint_type - get the endpoint's transfer type + * @epd: endpoint to be checked + * + * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according + * to @epd's transfer type. + */ +static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; +} + /** * usb_endpoint_dir_in - check if the endpoint has IN direction * @epd: endpoint to be checked @@ -1037,6 +1060,8 @@ typedef void (*usb_complete_t)(struct urb *); * @urb_list: For use by current owner of the URB. * @anchor_list: membership in the list of an anchor * @anchor: to anchor URBs to a common mooring + * @ep: Points to the endpoint's data structure. Will eventually + * replace @pipe. * @pipe: Holds endpoint number, direction, type, and more. * Create these values with the eight macros available; * usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl" @@ -1212,6 +1237,7 @@ struct urb struct list_head anchor_list; /* the URB may be anchored by the driver */ struct usb_anchor *anchor; struct usb_device *dev; /* (in) pointer to associated device */ + struct usb_host_endpoint *ep; /* (internal) pointer to endpoint struct */ unsigned int pipe; /* (in) pipe information */ int status; /* (return) non-ISO status */ unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/